Garmin has GPX, CSV, GPX and GDB files, and likely more. Are there any tools to convert one to another? I'd accept the previously mentioned ATM location POI...
On Tue, Nov 4, 2008 at 10:45 AM, syme_ampleforth ... GPSBabel converts all of the above to all of the above, including the "likely more". [Non-text portions of...
So here's my workaround.. A) The ATM site http://allpointnetwork.com gives me a broad choice of formats. [Someone must be offering a package that does this --...
On Tue, Nov 11, 2008 at 10:39 PM, syme_ampleforth <syme_ampleforth@... ... That's a pretty good sign their GPX is broken. Send their guy to me if he ...
... Did so... ... True, but I wanted to see what was going on. One thing I've not grokked is how to attach their logo bmp to their POI's; or how to specify...
Mapsource 6.14.1 displays a tracklog with units of 0.1kn precision. But only between 0 and 2kn. Is this a change? This is good but why not for all speeds? ...
Hey guys. New to the board here and I'm having a couple of issues that I hope someone here can help me with. I use my unit solely for marine navigation. I...
Yep, I have that same issue. I also spend a lot of my time in the CA Delta. I believe your speaking of my post a few months ago. I'd like to hear more about...
... Sound like you have the Route Tool enabled when you select the waypoints on the map. Another way to do the same thing is to select them all in the...
... pops ... OK I replotted the same route this time just using the waypoint tool by placing waypoints along the route. I then highlighted every waypoint and...
I'm writing a travelway maintenance application for a state agency and one of the districts has the Garmin GPSMAP 76CSx device. Has anyone written custom...
I got a solution to remove the user waypoints' names on a 60CSx. You probably can use the same solution on your unit. But only USER waypoints. So you will...
OK...here's what I've done so far - 1) Created a route in MapSource by using Waypoints only. All waypoints were selected. Went to Waypoint Properties and set...
Thanks for your investigation Jon! I'm following this issue closely. Rick s/v PainKiller www.fotki.com/sailorick ... From: Garmin_GPSmap_76C@yahoogroups.com ...
OK...Garmin tried it too and got the same result that I did. I'm thinking it's an issue within the unit software itself. The guy I spoke with gave me the email...
... I can't try it right now but what about *just* transferring your waypoints (with "Display" set to None) then creating a route, in the unit, using those...
... That didn't work. However this did. On the map page press MENU, Setup Map, select the T tab, set User Waypoints = None. All waypoint names disappear but...
Not on mine. Here's what I did. As per your suggestion I uploaded just the waypoints to the GPS. I then created a route by using said waypoints. I made sure...
Set one of the data fields in the screen of interest to altitude to view it constantly. Just hit menu and look for data fields. There is no substitute for...
Wondering if anybody has any thoughts about this. On a recent flight from the West Coast to Florida I had my GPS 76cs on to record the flight path, altitude,...
... No. Despite many user complaints, Garmin has not implemented a firmware change to allow the continuous display of GPS elevation in sensor-equipped models....
... the altitude is determined based upon barometric pressure which of course was artificially controlled and maintained within the airplane. But, why was it...
OK guys. In my process of R&D with this thing, here's what I've found so far. The "User Waypoints" parameter under the "Map Setup-Text" menu applies only to...
Attempting to do some Photo Tagging for the first time. Recorded a track on the way home from work. saved it. Took photos on the way home at various...
... timestamp? Not in saved logs. It always strips out the timestamp data. It also winnows down the number of points by removing points in straight segments....
Hi Roy: Are you absolutely positive about your remark below? Do the x models save to the card before they stop logging to the full memory or wrap when full...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
