Yeah, i've done that before when doing track days in my car.. see your speed around the track, every second. Who needs an expensive data logger setup :-) Mike ...
... (Main- ... get cut off, ... corners cut off ... point. Instead ... corner, and a ... can't describe ... I recorded a track on my way to work this morning...
There is so many settings to get the track the way you want it, I doubt if there is any problems with the firmware. Crank it up to 1 sec for about a 3 hour...
... I just recorded a track while out on an errand. As I stated before I use Recording Method = Time Interval = 1 second However it appears as though Mike is...
I've had my 60CS not record the track. I put it back from distance interval to auto and most often and it has a track now, I can download it with ExpertGPS and...
To those having problems with 3.61 beta go ahead and report the issue to Garmin. This is what beta's are for. Unless they hear about issues they won't be...
I just took a more detailed look at the track I recorded this morning. The entire track was about 1200 points and I used my own TrackTool program to dump this...
Hello all! I am sure I am just doing someting wrong or mis-understand but... The Total Ascent and Decent fields on my altimeter never change, I have looked in...
... You have to have track logging enabled :-) Go to the Track Log page and turn it on. It stumped me for a while too. In fact I think someone told me a long...
I'd almost given up on Garmin releasing this product but after looking online today I discovered that's it now for sale at several dealer sites. Garmin doesn't...
Normally, I do. However, I wasn't sure there really was a problem, hence I was running it by you guys. I know there's at least 3 of us daring enough to run ...
It's clear that with the auto setting and with the timed setting (once per second), that the unit is skipping occaisional track points. It would be interesting...
We've had the central region in stock for a lot longer than 3 weeks. Actually we got them first on 12/2/04. Darrel Goheen GPS@... http://www.tvnav.com ...
... Not that I know of. You have to use the commandline for "raw" IMG's. BTW the author (Stan) is a member of the Map Authors group so questions about sendmap...
annoyedone I do have the track logging enabled. That is the reason I am using the GPS, to aquire a track, mileage and elevation data to better represent the...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Garmin_GPSmap_76C group. File :...
Garmin_GPSmap_76C@yah...
Feb 2, 2005 6:29 pm
2084
I had same problem as all reported. I ran several tests on each version 6 & 6.1 and drove the same coarse about 5 miles. Found that Lock to Road option caused...
... I've never used the "lock on road" option. There's still an issue, in 3.61 beta, when not using it. ... I've no better connections than you have. You...
OK, I set my 76C to track every 0.04mi on my way to work, it didn't even come close. It had a lot of gaps that were a lot more than the requested 0.04mi (and...
... Have you also considered there is a 1hz update rate to include as well as the distance setting...... If you are going faster than 0.04 mile/second (I'm...
As I wrote in this thread http://groups.yahoo.com/group/Garmin_GPSmap_76C/message/2043 MapSource 6.5 does not save the Vertical Profile (route properties) ...
Here's the VALUE of mine. I do not know if it is the DEFAULT value or something might have changed. But I believe you said that Mapsource does not store any...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
