There is at least two sizes that I saw..5 x 12, 7 x 15 Bob _____ From: FreedomOwnersGroup@yahoogroups.com [mailto:FreedomOwnersGroup@yahoogroups.com] On Behalf...
As with any other prop you have to use a prop puller. Most boat yards have them and will rent them out. BTW, a hammer is not the solution. Regards, Van ... ...
Props are secured on a tapered shaft, and are prevented from slipping by a square (cross-section) key. After you remove the nut that holds the prop secure, a...
<Photo%20of%20the%20hull%20layup%20schedule%20at%20bow> Photo of hull layup at bow <http://img144.imageshack.us/img144/6712/p1010006jz7.jpg> Our boat was in...
George, Thanks. Knowing that a Vetus 50 kgforce unit works well with your boat is very valuable information that help me in selcting the right size unit. Is...
Michel, We have yet to try that thruster in any kind of strong wind conditions... just a caveat. Our thruster is just aft of the main mast. I'm not familiar...
This is a little late and not sure if anyone posted this but it's a link to the PDF with the Fuller Brush Portlight dimensions. Fuller Brush Portlight PDF...
I had aluminum masts, wishbones and wraparounds on my F33/35 CK (my previous boat) and have CF masts, alu wishbones and single ply on track on the F44 CK. ... ...
The bow sections of the F40 and F44 catketches are very similar in design and construction, as far as I have been able to see. Your thruster location would be...
Thanks everyone--- I ran it down finally! Mine is black but the white 7x15 should be the same. The screen is somewhat smaller than the port obviously. Ron Hoyt...
Could anyone suggest how many of this model where made? Just a curiosity really. Niki and I are looking at buying one soon and everything f39 is exciting and...
George, Many thanks for the photos. It never occurred to me that there could be empty space below the watertank. I can't access the tank yet, so I have no idea...
Herm. Thank you for your reply and info. The mast does need the bearing. Happy sailing. Charlie ... is a version of F25 that's unfamiliar to me. If it fits...
I have hull #44 which is shared between the PH and Express. Mine is the Express model [1985] and supposedly was one of only 9 Express built. I don't have any...
Sea Fox is now on a mooring in Dutch Harbor, Jamestown, R.I. My jib is in pretty tough shape and I am looking for either a used one or recommendations for a...
Try these guys. www.marinedieseldirect.com regards, van ... From: ron barr To: FreedomOwnersGroup@yahoogroups.com Sent: Wednesday, June 04, 2008 2:05 PM ...
Hi Peter Dave Bierig invented the jib boom and is still making jibs in PA. He can be reached at 814-459-8001. You may have trouble finding a used Freedom 32...
Mack Boring in NJ is a major Yanmar parts supplier. You can google them and check them out, too. TW ... -- No virus found in this outgoing message. Checked by...
Ron: I see you're from Newport. I have found Oldport Marine in Newport to be resonable in their pricing. Rich Liberte, F36 Portsmouth, RI  ... From: ron...
Hey Ron........This may go contrary to what many think........but yanmar parts from an authorized yanmar dealer are normally cheaper than on line. This is...
You can no longer buy direct from Mack Boring you have to go through their dealers and you know what that means. I am using http://www.marinedieseldirect.com/...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
