Expect to see the NEW YAESU VL-500X2/70 at DAYTON!? This addition to the HF/6 meter QUADRA VL-1000 amplifier will enable you to have 500 watts output on 2...
Hello, I am setting up a new computer and HRD and I cannot get it to read the Frequency on my rig. I am using HRD v4. I have run this same set up before, and...
I have noticed that the audio frequency response is not balanced between USB and LSB. USB seems to be normal and LSB seems to be set for a little more high...
Hello, Does the 897 have any internal fuses or breakers than can prevent the unit from powering up? Mine worked fine last night when I turned it off, and today...
I don't know off hand, but in the menu (hold down F key) you can set up different offsets for USB and LSB which can taylor this. - Richard 2009/4/1 morseham...
Hi Adam, Just a simple question ? has your computer told you what port is being used ????? [recognised] .... Have you inserted FT897 ??? in the "what rig...
Check menus 015 and 017. The default is 0Hz. Any other shift and they should be set opposite of each other, like -200Hz and +200Hz for equal shift on but...
For some reason, I do not have a menu 015 and 017. When I access the menus, and go through them, it jumps from menu 014 to 022. Why would that be? 73, KB4MTO /...
I do not recall any fuses or breakers inside the radio. Check all connections, as that is most likely the problem. If you are using the Molex connector,...
Good Morning Group, On the right top corner when you press the [F] button to gain access to the menu mode. There is either a [-] dash or [.] dot when you...
First menus "Extende Menu". Turn this on. Then you get all menu items. A nice feature is that you can use the "Skip" button (Button A) to determine whether the...
whether or not it skips that menu option when "ext menu" when No-001 is off ... From: "Mister Bad Wrench" <wucherer1968@...> To: <FT897@yahoogroups.com> ...
Recently, I experienced a very similar problem with my 897D. Indeed, it was caused by a loosened power chord connection. I have heard that some other people...
Customgraphics! Renee Thomas, Okey, so the icon [-] dash means it will display with the extended menu is activated and [.] dot will not display. Thanks for...
Hi Jeff, If it turns out that the problem is not an external issue with connectors or cords, I would suggest that you download the DG2IAQ modification sheet...
Hi Paul, My 897D had the same issue, which as you stated, could be worked around with the IF shift, but I found it annoying. In my case it turned out that the...
One other thing that I don't recall seeing mentioned is that the one or more of the pins in the power connector could be not seated all of the way, and "backed...
Thanks Jeff ________________________________ From: Ken Bandy <kj9b@...> To: FT897@yahoogroups.com Sent: Thursday, April 2, 2009 11:47:46 AM Subject:...
Thanks Jefff ________________________________ From: Tom <kerryguy7@...> To: FT897@yahoogroups.com Sent: Thursday, April 2, 2009 10:10:00 AM Subject:...
Hi All! Starting tomorrow AES in Milwaukee is having their "Superfest." Since I live within a 1-1/2 hour drive I'm going. On the other hand I'm also attending...
You need to go to menu 1 and enable EXT MENU first to get the extended menus displayed. I just went through the same process myself. Cliff, G4PZK From:...
This is for the people who use the AT-897 Tuner. I have an FC-30 that I like, it does what I want. I purchased an AT-897 tuner because of the extra CAT port...
I would like to know if the antenna tuner data cable needs to be installed when ever you TX on the radio. If so how does one keep HRD connected to the radio?...
Thank you Rob. You are on target with the issue. Everyone else was pointing at a frequency offset issue which this is not. It is an audio passband issue and...
... Steven, You may want to try Eham, QTH or QRZ.com for a deal. I purchased several rigs, etc. from one or the other on-line forums and have always had good...
