Hi Gang, It's been a while since I posted to the group but I am having a clear out and need the space so I'm going to dispose of all my FM900 series kit.. ...
Hello Vic! I wonder if you have the stock from the Philips office I used to work in.. We had a lot of them, NOS, a bunch were FM91's with the extended cases....
Hi Tuff There's a lot of this kit available here in Oz, but from what I've seen it's not new. Perhaps you could give us an indication of the lowest cost...
Hi,wonder if anyone can give advice,Have 2X fm900 one the mic is not working but plug it into #2 and bingo it works,can you advise where to start please.Tnx in...
I've picked up a 900 base cassette with a PS900 supply on the back. How is the supply module removed from its grill surround? I removed two screws either side...
Hi John, It's in the group files section. It's called FPP. 73....Eric VK2VE. _____ From: FM900@yahoogroups.com [mailto:FM900@yahoogroups.com] On Behalf Of John...
Hi Eric One option you can consider is to get the VK2AFI software and channel programming (see http://www.digitalgraphics.com.au/fm900pg.html). I did this and...
... Yup, I second that, I have one, however, the Willem site has since disappeared, and getting support (there used to be an excellent forum) is now difficult!...
Hi all, Have been observing for some yrs and think the last time I posted a message was maybe 5yrs ago..lol till now.. I dug up my old 91 out of retirement and...
Hi Nils, Turning off after a couple of seconds usually means it's not communicating with the head, or there's something wrong with the EPROM, or there's...
Thanks Mark, When I get a chance I'll check.. Regards, Nils From: FM900@yahoogroups.com [mailto:FM900@yahoogroups.com] On Behalf Of Mark HARRISON Sent:...
Hi all The current microphone on my FM900 is semi-hardwired into the head, with a 6-pin modular connector. I now have a DTMF microphone for the FM900, which...
Hi Everyone, I have just picked up an FM900r Dual head with a MSR901 controler and A band body. Has anyone had experance with these ? On the head is a "repeat"...
Hi Andre, If you search back through the fm900 yahoo group archives you may find various bits of useful information on these devices although not much seems to...
Thanks Mark ill have a search. I will post my results when ( if???) I get it up and running ok. Cheers Andre ... From: Mark HARRISON Date: 22/07/2009 12:16:42...
Well I managed to get this up and running , but it is behaving as a standard head. After talking to the FM900 people at club , it seems you need so very...
Andre, What hardware and software codes did you use for programming? Since you have tone coming out (at the right frequency ?), and pin 15 of U405 is wired...
hi people, been a member for a while and have not needed help until now, i have programed a 92 W1 with sellcall on one channel and it works fine,apart from the...
... Hi Peter. The '91 will stay muted until: An individual or group selcall is received on that channel. The radio usually responds by transmitting its own...
hi Gavin, thanks for your reply, HW/9502/92730514 SC/110100200200233 yes you have hit the nail on the head, its the mic. i pulled the mic apart and it has been...
Hi there does anyone have a copy of the user manual for the collins prc-515 or ru-20 in English that they could email me. Thanks Martin G7JWR g7jwr@... ...
Hi All, I picked up a couple of B Band 92's today at a rally (Hamfest) for next to b*gger all. Both had faults listed, and one I have got EPROMmed up, and it...
... Right, ok, further: One is missing the VCO, so that is a spares unit. One was marked: "No RX Audio" and the other was marked "EPROM Fit, No Lockup", so I'm...
Hi James, Hopefully the dymo tape label is just a reference to the repeater/s it's talking too. It could complicate matters somewhat if it's been hacked to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
