HI ALL JUST WONDERING WITH THE PHILLIPS FM900 I JUST BROUGHT I THOUGHT IT WOULD BE A NORMAL 40 CH CB BUT I WAS WRONG CH ARE ALL OVER THE PLACE AND THEY ARE...
Hi Graham first you have to get the fpp program and write a bin file for what you want in the radio the you have to have a eprom burner and put the bin file...
Also with the programming you need to know if the radio is fitted with options EG: sellcall board Type 1 or 2 , ctcss encode or endode decode board and the...
Daniel, I think Graham is looking for someone else to reprogram it. I'm sure there are standard EPROM binaries around on the WEB - all he needs is someone...
G'day all, got a remote A band FM900. Tried burning a 12.5 khz rom with fpp, but when inserted into the radio,it refuses to lock up on receive, have not tried...
Hi Simon, Usually there isn't much call for 12.5kHz channels on 2 meters. Those that do insist on using odd multiples of 12.5kHz usually end up causing grief...
I am after the pin connections for a "CES" brand DTMF microphone made by Winter Park Florida USA. It uses the standard DIN plug but does not work on my early...
Hello Les You will find that the mike needs +12 Volts to pin 8 from the control head. Telstra mods. Run a wire from pin 8 to switched 12 v in the control head...
On some of the fm900 heads the wiring was not always in place u may have to look at the wiring inside the head Alan _____ From: FM900@yahoogroups.com...
Thanks for the tip Alan, looks like I will have to trace the wiring as my old standard mic works on the same pinouts as the DTMF mic. Cheers, Les [Non-text...
I have heard that the standard dynamic mic insert can be replaced with a condenser mic, if so, what type is used and how is it wired in? Thanks in advance, Les...
Hi Alan, thanks for the info but does not apply to my problem as I'm not using a remote head type unit. The problem is solved now after making a small mod...
Hi Don, thanks for the info. It didn't apply to my problem as the mic has no connection on pin 8. A small mod was required in the radio itself to apply 12v to...
Hi Guys My Problem is that I have a fully working FM91 Repeater I would like to put some different Freq's in it. Is there something special or non standard in...
Hi Steve, You should be able to just read the eprom with your burner program and save the binary image to fpp directory. Go into fpp and open the bin file you...
Matt, FPP only works from the .job and .chl files that are created from the FPP application. It cannot read an EPROM, so if you don't have the original files...
Hi Steve, Whatever you do, don't erase that good EPROM ! It may provide valuable clues later on. I guess someone out there may have the software for FM900...
Hello Steve and Mark The radio seems to be an FM95. Telstra had them for the "Interim Mobile" telephone system (forerunner of the CMTS) 500-520 MHz. They had...
Hi all , can someone please tell me what the current rating is on this supply as I have no info at all other than it is 13.8 volts. TIA Don VK3YV.......
... From: FM900@yahoogroups.com [mailto:FM900@yahoogroups.com] On Behalf Of don2822003 Sent: Thursday, 26 July 2007 17:01 To: FM900@yahoogroups.com Subject:...
The manual states that the power supply is rated for 5A continuous between -10 deg C and 60 deg C with overload protection at 6.5A. It also has overvoltage...
Hi all, I am looking for the software that is used to program the eproms in the FM92/FM900 rigs. I have 3 rigs and would like to have them all have the same...
Hi Mark, Thankyou for that info. I have not had a lot to do with eproms. I guess the easiest way for him to add some channels is to totally re-write the job...
Hi Les. It's in the group files area (FPP) 73....Eric VK2VE. _____ From: FM900@yahoogroups.com [mailto:FM900@yahoogroups.com] On Behalf Of Les White (vk5zw) ...
what frq are you looking for ... _________________________________________________________________ Advertisement: 1000s of Sexy Singles online now at Lavalife ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
