FM900: Group Rules 1. No spam 2. No Flames 3. No cross posts, especially non FM900 related 4. Try to keep content FM900 related. There are groups specifically...
FM900@yahoogroups.com
Jul 1, 2004 12:03 pm
4415
Why was i send this e-mail again when i've already recived this e-mail, di i do something that i was not suppose to do? Thanks gtiboy FM900@yahoogroups.com...
Sorry, Mark but it is the short wave UV tubes that are needed for EPROM erasing. Try doing it with long wave ones such as the ones used for mineral ID which...
I used a Philips TUV 15 G8 Tube.......it's about 18 inches long and is clear glassed. Does a dozen or so eproms at a time in 15 mins. Tube was purchased at...
Something similar here. A germicidal clear glass tube of 15watt size in a standard 15w batten holder. The whole lot slides into a square galvanised iron down...
I need a operaters manual for a 900. details for it are. Narrow banded VHF for WABFB. Base station operation power output at 1 watt. 2 scan groups. Can anyone...
Hi all, I want to connect my UHF & VHF 900s together to operate as a crossband repeater. I live in a poor signal area for HTs and would like to use my HT while...
Hi All I have a FM 91 and recently set it up as home base. When i TX there is a decimal point to the right of the channel. What does that mean. Thanks in...
Sean, To Quote from the manual "If a TX Power Range/SWR error is detected a decimal point will appear in the right hand side of the display to warn the...
hi all, I would like to know if anybody can help me, I have two problems with my fm92 1) I have fitted the expansion option (Nsc..) for voting but the unit...
Sean, This informs the user that there is a fault on the set. It could be VCO geting incorrect values or high SWR or power. Check the files section & download...
hi you also have to program the eprom to vote or scan. Daniel ... _________________________________________________________________ SEEK: Now with over 50,000...
Thanks for your help Daniel, but I have already done that, however whilst I have been on-line I found some links that I have not diconnected and others that...
Here lies another saga, I have now completed links 405 & 413 and when i power up, the unit seems fine however, when i scroll up through the channels it will...
Hello there. When you program up an FM900 to vote, you lose channels from the top down (ie: ch99 and down). If you have three channels in a vote group, you...
I have what may seem as a dumb question, but I adore my 900's and dont want to blow up anything... My question is: I have a 92 remote in my 4x4 and wish to...
Hi Nils, Yes you can use the same cable that you were using on the 92. The cables are the same. I did the same when I converted my 92 to a 91. Cheers Wayne...
Thanks for your help lardarsedonuteater, however im sorry, i probably should have explained myself better in the first place. My FM900 has 99 channels...
Hi Although I read and enjoy incoming posts regularly, this is the first time I have posted a request for assistance. In the past have successfully programmed...
Can't give you a firm answer - but it sounds like it has something to do with the display dimming cct having a problem. I remember that there was a problem...
I don't have a direct solution, but a couple of things to be aware of. I know that there are rare local control fm900s that need different software. I think...
Hi just let you know when you program a radio for voting you need to minus about 3 channels for every voting channel as the eprom will loop its self so evey...
Hi all I believe I have the eprom the right way around and in the right spot in the programmer this time but still no luck. I have done a blank test and it...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
