... From: Hamish Moffatt <hamish@...> To: FM900@onelist.com <FM900@onelist.com> Date: Tuesday, 29 December 1998 9:45 Subject: [FM900] Re: lots of hum...
127
Barry White
bewhite@xxxx.xxx.xxx
Dec 28, 1998 3:24 am
A couple of weeks ago there was a couple of messages about getting enough audio into the FM900 series radios for packet. There is a resistor on the microphone...
128
Eric van de Weyer
ev@xxx.xxx.xxx
Dec 29, 1998 2:01 pm
Hi David ... .>hands have the I/O Expansion kit fitted? I have 4 VHF units and 1 UHF unit. The UHF unit has signalling so I assume that it will have the...
129
aaron
Aaron@xxxxxxxxx.xxx.xxx
Dec 30, 1998 2:14 am
ok guy's, i have a few of these chips, and am prepared to let them go at $40 each, so if anyone's interested, e-mail asap, as it will be on a first in first...
130
David Moss
David.Moss@xxxxxxx.xxxx
Dec 30, 1998 3:03 am
Hi, I'm using the FM900 with packet without needing to modify the radio's insides (this is so I can revert to the microphone without adjusting the gain on the...
131
David Moss
David.Moss@xxxxxxx.xxxx
Dec 30, 1998 4:15 am
Hi Eric (and all), Stay tuned for news about some alternate software for the FM900. This software was developed to work with the 'bare boards' radio (VHF and ...
132
Larry Munns
munns@xxxx.xxx.xxx
Dec 30, 1998 6:23 am
Aaron I will certainly be interested in one thanks. Please advise payment details (cheque ? etc) and I will despatch when you confirm. Thanks Larry Munns 7...
133
Ivan Miklik
penstud1@xxx.xxx.xxx
Dec 30, 1999 8:22 am
If you are having problems with the hum in the audio take out the hotographic diode: this will reduce the hum although the screen will be dull. install an in...
134
Hamish Moffatt
hamish@xxxxxx.xxx.xxx
Jan 1, 1999 7:46 am
I'm still on the quest for the correct hardware code for my radio. I have an FM92 + FM91 remote head and enough extra bits added to the PCB to make it 91ish...
135
Ivan Miklik
penstud1@xxx.xxx.xxx
Jan 1, 1999 4:27 am
I would like to turn my fm 91m up to approx 35 watts on high power but not go to a technician to do it. Is it as simple as turning a pot inside the unit...
136
Hamish Moffatt
hamish@xxxxxx.xxx.xxx
Jan 2, 1999 5:38 am
... You probably could just find the appropriate components inside it and change them appropriately. However, this may well cause the power amp to be...
137
Dave Horsfall
dave@xxx.xxxx.xxx.xxx
Jan 2, 1999 6:15 am
... Quite so; manufacturers tend to set power levels for a reason... ... Yup; there's stuff-all difference between 25W and 35W, as far as the other receiver...
138
Alan Gilchrist
gilly@xxxxxxx.xxx.xxx
Jan 2, 1999 8:23 am
Ivan .... I wouldnt worry about it. 25 W - 30 W - 35 W !!! no ones going to notice the difference. and a good chance of blowing the rigs TX. Alan VK5BWG ...
139
ynotme2@xxxxxxxxx.xxx
Jan 2, 1999 8:35 am
Test ... Get free personalized email at http://email.lycos.com...
140
Ivan Miklik
penstud1@...
Jan 2, 1999 11:11 am
... From: Hamish Moffatt <hamish@...> To: FM900@onelist.com <FM900@onelist.com> Date: Saturday, 2 January 1999 4:38 Subject: [FM900] Re: 35 watts on...
141
Ivan Miklik
penstud1@xxx.xxx.xxx
Jan 2, 1999 11:16 am
Well thanks for the replies everybody. although is there any other handy mods worth doing to the radio ( i expecially want to get rid of the hum in the audio) ...
142
Dave Horsfall
dave@xxx.xxxx.xxx.xxx
Jan 3, 1999 3:59 am
... Mate, if you're gonna break the law like this, it's a good idea to not tell the world about it... -- Dave Horsfall VK2KFU dave@... Ph: +61 2...
143
Eric van de Weyer
ev@xxx.xxx.xxx
Jan 3, 1999 4:24 am
Hi Ivan, Over the range of units which I tuned up for the WIA I had a range of outputs ranging from just 25W up to 40W. The output level is adjusted by a Put...
144
Ivan Miklik
penstud1@xxx.xxx.xxx
Jan 3, 1999 5:20 am
... From: Dave Horsfall <dave@...> To: FM900@onelist.com <FM900@onelist.com> Date: Sunday, 3 January 1999 3:03 Subject: [FM900] Re: 35 watts on...
145
Ivan Miklik
penstud1@xxx.xxx.xxx
Jan 3, 1999 5:22 am
... From: Eric van de Weyer <ev@...> To: FM900@onelist.com <FM900@onelist.com> Date: Sunday, 3 January 1999 3:29 Subject: [FM900] Re: 35 watts on high...
146
Mark Cheeseman
cheese@xxxxxxxxx.xxxx
Jan 3, 1999 7:03 am
... A thought - would it be legal to use the '900 on UHF CB if the power was set to 5W? Ie, is the rig type-approved for CB (if that's how it works these...
147
Malcolm Alexander
malexand2@xxxxxxxx.xx...
Jan 3, 1999 11:07 am
AFAIK, yes, you can use a commercial transceiver on UHF CB, BUT, (a really big BUT) is must be set to 5 watts and not changeable by "operator" controls. ...
148
Mark Cheeseman
cheese@xxxxxxxxx.xxxx
Jan 3, 1999 2:05 pm
Thanks Mal, If I were to do this (and it's a pretty big "if", as I don't currently have a UHF FM900) I would program those channels into the EPROM at low power...
149
Skinny
mrskinny@xxxxxxx.xxx....
Jan 4, 1999 7:43 am
Software codes For 91/moded 92 uhf W1/U model's 25kc stepping would be H/W 9502 91740710 *check below 9502 We All Know What this Is, Same as A Visa Card...
150
Skinny
mrskinny@xxxxxxx.xxx....
Jan 4, 1999 6:37 am
Hi All Would replacing The Photodiode With a normal Diode or Similar, To A value Matching So You Would Be Able to Have the display As Bright or Dim As You...
151
Hamish Moffatt
hamish@xxxxxx.xxx.xxx
Jan 4, 1999 9:20 am
... Indeed, that's why I asked. IIRC, UHF CB is limited to *5* watts, not even 25. Perhaps Ivan should be installing the low power components rather than...
152
Hamish Moffatt
hamish@xxxxxx.xxx.xxx
Jan 4, 1999 1:22 pm
... Hmmm. I assumed 25kHz but could be wrong. Unfortunately either my spare EPROM or the programmer have died for the evening so I can't test it right now. I...
153
Eric van de Weyer
ev@xxx.xxx.xxx
Jan 5, 1999 6:25 am
... From: Ivan Miklik <penstud1@...> To: FM900@onelist.com <FM900@onelist.com> Date: Sunday, January 03, 1999 16:21 Subject: [FM900] Re: 35 watts on...
154
Alan Gilchrist
gilly@xxxxxxx.xxx.xxx
Jan 5, 1999 11:48 am
I have a friend that has a local head FM92 on two meters. Unfortunately our local 2m repeater is not on his channel setup. I have a spare eprom with the...
155
aaron
Aaron@xxxxxxxxx.xxx.xxx
Jan 5, 1999 11:48 am
it will refuse to work... i have tried it before......
