There is another way to do the canopy support. I used a camera tripod leg with the base between the seat backs and the upper end mounted to the rear canopy...
Dave, That would be great. I know when I bought Norman's Dragonfly project several years ago it had a tripod leg for the canopy support. He probably got the...
Dave, I have a right side hinged canopy. Would your system work to raise the canopy a small amount during taxi on my plane?If so I would like to talk to you...
I am installing vgs on my front wing and I don't have the infomation on what angle to place them acording to the leading edge. If anybody has information on...
Bart, Can I get a PIC of your bird ? Tad bartmo <bartmo@...> wrote: Dave, I have a right side hinged canopy. Would your system work to raise the canopy...
Jeff Thank you from one vet to another. The first year or two you will miss "the boys" but after that you will fill your life with family and flying and...
Tad, It is not finished yet, but I will take some pictures this weekend. Bart ... From: REBECCA SIMPSON To: Dragonflylist@yahoogroups.com Sent: 6/1/2005...
Hi Bob: Send me complete specs and pictures. I am ready to buy. Where are you located? I am in S. California.... Regards, Pierre ... [Non-text portions of this...
Just thought I would drop a line so everyone would not think I absconded with the NASA $400.00 a quart paint and the fantastic NASA epoxy glue Drew so kindly...
I don't have the infomation on what angle to place them acording to the leading edge. Les To plot your 15° to airflow: 1.Make template board white glue two...
Les VG spacing is a study in itself. PA28 Cherokee use very wide wide spacing. Rutan Voyager very tight 1" DF builders inbetween spacing check Yahoo photo...
Les Forgot to mention (sometimers...sometimes remember sometimes don't) homebuilders have used doubleside sticky carpet tape to stickon and test if you want to...
I bought some fiberglass reinforced carpet tape that looks like it is going to work very well. Very thin, strong, and sticky. I have been cutting tape and...
Terry, I have been trying out different containers and have discovered that the 1 gallon milky tan colored Arizona Tea containers hold this sticky goo forever....
In a message dated 6/1/2005 11:06:46 PM Mountain Daylight Time, terrynpirate@... writes: It turns out that the glue works so well it tries to imprint...
After flying production planes (such as Cessna) for many years, I am considering to buy an inexpesive experimental 2seater, but I am surprised that the AOPA...
Falcon Ins. in Kerrville, Texas is the EAA insurer for experimental ac. I just got a policy for my Dragonfly MK II with them. Their # is 1-866-647-4322. Ask...
Bob Mackey of Falcon Insurance gave an excellent session on this topic at Sun-N-Fun. A lot is going to depend on what engine you have in your Dragonfly. Do...
Mine was 600 bucks a year for one million liability with avempco. They would not cover me until I had 50 hours in my Dragonfly. Allan [Non-text portions of...
Imagine50@...
Jun 3, 2005 6:02 am
16130
The Dragonfly supposed to be a designed for "local" flying fun only, since theres is no baggage compartment of any kind or size available. However, some people...
There can be lots of space for small soft bags if your weight and balance will allow it. If your weight and balance will allow it, there can be a pretty good...
Luggage space in a Dragonfly is more weight-limited than space-limited. If you have a passenger, you will probably be close to gross weight before any ...
... Hey Rich, I was just thinking about you the other day and hoping you're well. It was really upsetting what happened to you, and I thought about it a lot...
If you want to decrease the pressure of a gas strut, first see how far the rod goes into the cylinder. Let the rod out one inch and note the position on the...
GB--------- The steel legs were designed by another fellow and slightly modified by me. They fit right into the original slots with a small spacer attached....
Why not silver solder the schrader valve to the cylinder, then you won't ruin the cylinder and can adjust it all you want, Up or down. Mine works fine. Contact...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
