In a message dated 10/31/2005 11:24:56 PM Eastern Standard Time, ... If all others have only one leg, would you cut yours off too? Chris Marco [Non-text...
Kato NW2 was my first DCC install ever. I did it about 8 years ago with a N-scale Digitrax decoder. I first bought one prefabricated frame from a company in...
Not if it was the wrong leg. :) Jim If all others have only one leg, would you cut yours off too? Chris Marco [Non-text portions of this message have been...
Steve, Currently I have found 154 names for N scale groups across North America. Of those 154 names 121 have responded to a survey. Of those 121 who responded ...
In a message dated 10/31/2005 11:33:59 PM Eastern Standard Time, Digitrax@yahoogroups.com writes: Last I heard the DS64 was still in the hands of the beta...
Will, Try Tonys TRains for the sheet it shows how to move which wire. The yellow gets moved next to the black. Make sure you remove the plug before soldering....
Will, you can also find this info on the Digitrax web site with a picture of the plug. See link below. http://www.digitrax.com/appnote_p2ke6e7.php Mike Gleaton...
Doug, I was informed that the DC problems were caused by a lack of electrical continuity. None of the Ntrak DC group wanted to talk about their problems. I...
... shows ... Kent, thanks for the info. I'll definetly try to trace out our Loconet between the boosters, the DCS100, and the BDL16's. Unfortunately, we have...
Paul, If you will remember from my message I indicated that you need to 2) Make sure your LocoNet cables are in proper working order. For me that means that...
There was an error in my message to Paul. The paragraph before the defining of the position of the rotary should read: "I also built myself a little LocoNet...
Digitrax List Monthly Reminder! Links to the Digitrax List Archives: Messages at; http://groups.yahoo.com/group/digitrax/messages/ Files at; ...
Digitrax@yahoogroups....
Nov 1, 2005 8:00 pm
91404
Digitrax List Monthly Reminder! Instructions for Unsubscribing from the Digitrax List: UPDATED: 06/03/2000 for eGroups 01/28/2001 for YaHoo! 04/28/2002 for...
Digitrax@yahoogroups....
Nov 1, 2005 8:00 pm
91405
Your railroad, your control system. You have a lot of great equipment and it makes no sense to give it up, buy a new (different) system, have to learn it, and...
I have been tossing around for weeks every point you brought up but If I want to host a large operating session with the group of guys I model with then NCE...
Steve, If you ask the 35 group members to purchase an inexpensive Digitrax throttle, you will find out quickly how many operating friends you really have. Mike...
Steve: Let me address this one since one member of our group does have NCE... For the first 3-4 months, there was a noticable "learning curve" when all of us...
I asked about this a couple of times on the JMRI chat group and would like to know if anyone else has had this problem. I am running a DCS100 purchased last...
The DH163LO board decoder has current limiting resistors for the forward and rear light functions. Mike Gleaton Charleston Digital Trains, LLC Charleston, SC ...
Steve, Is there a possibillity of using both systems? Not at the same time but by changing out the command stations. Your Digitrax boosters should be able to...
Hmmmmmm -- In Digitrax@yahoogroups.com, "Martin Myers" <martin.myers@v...> ... time ... the ... radio ... complicated, ... over ... with ... have ... and ... I...
Martin/Steve: The boosters would still work... The throttle bus will NOT. The two work on a very different theory -- six wires is NOT six wires in this case....
... firmware revision FF. Using the JMRI software and BLI SW-7 locomotives (3) I can not get a response from the locomotive(s) using F9-F12 with the JMRI Loco...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
