Hi Les, you can simplify one more step by using a single diode in series with the battery, though I'm not sure you even need a diode at all, but I don't know...
... Sorry, didn't have time to post some links on my last response. http://www.aztectrains.com/ ... I bought mine last year at M.B. Klein. They advertise in...
I cant find the symptom in the DUPL .. so here goes .. if anyone else has expericenced this problem . I would appreciate some advice .. The decoder was in a...
John, I'm sure you are aware of the motor contact problem on the DN146 as you said you reseated the decoder. A short here is probably the start of this trouble...
Check out Tony's Train Exchange at http://www.ttx-dcc.com. There PSRev unit now offers automatic turnout control at no extra cost. No need for a DS-54, BD-1,...
David - I've never tried or seen #2. RE #1, the Zephyr documentation alludes to this when they talk about "physical direction". I've had a customer's locos...
Right Gordon, But at the price of diodes better safe than sorry. I also wanted to make absolutely sure they was no possible return path. This box has saved us...
Just a caution regarding TTX. I called to order two digitrax decoders, he steered be to the NCE N103s which I accepted. Found out later that the 103s were of...
Hello Dave, too bad to hear that you have problems with the Zephyr. Mine just workd fine from the start! ... As mentionned earlier, both locos have to run same...
Answers in original post. ... From: "hardwired64" <gfd@...> To: <digitrax@yahoogroups.com> Sent: Saturday, November 30, 2002 6:10 AM Subject:...
50988
Robert F. Barnes
rbarnes@...
Dec 1, 2002 6:51 pm
Bill, Here is my technique for making a spring switch. I started with an Atlas HO Code 100 turnout and a piece of (approximately) 20/1000 phosphor bronze wire...
... speak ... by ... I asked for and talked to Tony regarding the return of the decoders. He remembered recommending the N103s so he is the one I spoke to...
Joshua, The installation manuals for the DH123 series are in the manual section on the Digitrax site. The first page lists all of the features. Al ... From:...
Thanks for the advice. We Canadians have even less protection for internet shopping from American suppliers than Americans do, so we need to be extra cautious....
Thanks, I'll try that Bill ... HO ... wire ... small ... the ... measured ... wire ... you ... 'U' into ... fit, ... wire). ... fasten ... route ... turnout ...
Did you ever get an answer to this? I have the exact same questions. I downloaded the PR1CT, and got only the program portconn.exe which doesn't seem to have...
There are articles on the web about the install in the Bachmann Consolidation and on the KATO site for the Mikado. The Consolidation is said to be an easy...
Hey all, I am not able to properly run an analog loco on my layout. I have the original Empire Builder, the one with the db150 and the dt100r. The loco will...
I too have just received the PR1 and have been trying to get hooked up to work on my HP Pavilion with Home XP. I have tried both the PR1 Win software and the...
Hi Guys: PR1 does not work with Windows XP. This is the situation I was in and finally got LocoBuffer and Decoder Pro -- Works great now. Oh, had to get a...
Do you have a part number and where to get the USB adaptor? Where is the LocoBuffer available from? I have the Decoder Pro program. Mark Gaeth Decatur, IN ... ...
Hello all, I am brand new to all this, so please forgive my naivety. I spent the holiday weekend building tables, two 4 by 8's, to be used in my living room as...
