You might want to look into the "Block Watcher" from Tony's Trains. The documentation is pretty poor and it is hard to dig out what it will and won't do for...
Old Fashioned Swap Meet When: Saturday November 8th 10 AM to 3 PM * Where: Lake Seminole Presbyterian Church 8505 113th Street Seminole, FL 33772 Admission:...
The decoder to use is the DN163A2. I contacted Digitrax and they told me that is the Decoder to use. It will also work with the GP-30, GP-7 and GP-9's. Mark...
hello Michael, I'm Charles and I would also like to see that information as well thank you **************Plan your next getaway with AOL Travel. Check out...
I have a Kato HO SD80MAC from the first run. I installed a DH123-PS decoder in this locomotive a couple of years ago (using the 8-pin plug). Everything had...
I just replaced my Zephyr with a DC100. The problem I am having is when there is a short the DCS100 beeps 4 times and the track light starts to flash. Once...
To: Ian What are you using for a power supply for the DCS100? If you are using the power supply that came with the DCS50 (Zephyr) this could be the root of...
I am using the Digitrax 5 amp power supply. I have discovered that if I have more than 5 locomotives on the track when the short circuit occurs then the track...
To: Ian Some more detail for you, a continuation of my last message <<<<<<>>>>>>>>>>>>> http://www.tonystrains.com/technews/powershield_x.htm PowerShield X...
Ian, Bet those 5 locos are all QSI sound equipped!? If I'm right the inrush current of the capacitors is the cause. I have the same problem with a DB200 and my...
Ian, Are these all sound equipped locomotives? This sounds like an "in-rush current" problem. If this is the case, I suggest you consider breaking your...
Hi, i did purchase the AZL 7006 Dallas TRE with Bombardier cars. It was mentioned ready for DCC. I do not see how to connect the Decoder,i would loke to...
I would also like to check out this signaling system...I am ready to start on my layout and have been looking for a system. Could you send it to me also...
Hello, I'm hoping to buy my boyfriend a Digitrax system for his layout for Christmas. Problem is I have no idea what any of the stuff I read means. Any...
Could you send to me too. Just started looking for a way to signal my layout. This sounds cool. Gary send to trainsssss@... ... GREAT! ... work, I ... ...
To: ???????? Where are you located? If you give some indication of where you are located someone closeby will undoubtedly offer some more precise advise. ...
Well, I hate to be the only one in the group not to ask for a copy so please send one my way. Thanks. [Non-text portions of this message have been removed]...
Happybear, I agree with Bob Young. A Super Chief Starter Set with a 5 Amp power supply will get him started and he can add items as needed. If money is not a ...
Michael, I also would like to be on the list for the signal system plans. Thanks in advance Rock ... From: moresteam765 To: Digitrax@yahoogroups.com Sent:...
Periodically, when I power-up my Zephyr system, I get an over voltage condition. Normally my 15v panel VM reads 12v, but under these overvoltage conditions,...
Hi everyone! So ... I was reading in the manual for a brand new UR91 today (purchased new in the last 6 months from Tony's ... but package still says Norcross...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
