Digitrax List Monthly Reminder! Links to the Digitrax List Archives: Messages at; http://groups.yahoo.com/group/digitrax/messages/ Files at; ...
Digitrax@yahoogroups....
Sep 1, 2006 8:57 am
103783
Digitrax List Monthly Reminder! Instructions for Unsubscribing from the Digitrax List: UPDATED: 06/03/2000 for eGroups 01/28/2001 for YaHoo! 04/28/2002 for...
Digitrax@yahoogroups....
Sep 1, 2006 8:57 am
103784
Those 3:30am air times are why some egghead invented DVRs/VCRs (gotta love those eggheads). :) Workin' On The Railroad airs Tuesdays at 7:30am in my market....
I would be VERY wary of running N scale locos at the HO setting. Not only can you exceed maximum motor voltage on some locos (particularly if you run analog...
I saw messages floating around on other boards, that they saw in a show in denver, that digitrax has a prototype of the drop in decoder chip made for the Z...
Thank you for the fast respose. That is what I thought but one can never be sure if you know what I mean. ... Lenz, ... but ... Soundtraxx's ... and...
... Yeah, which was why I was saying it would be nice if you could apply a fudge factor in the %speed display for each locomotive, so that the speed display...
My sons watching Workin' on the RR got them interested in model railroading and made them realize that they could do it.. They each built their own modules for...
Thanks for the prompt reply. I am using 14 guage wire for my bus, and 1156 bulbs for short management, and the booster is shutting down properly when shorted...
Digitrax told me in an Email on Tuesday 8/29 it will be available "soon". ---your definition of "soon" applies here. They did say it was designed. Micro...
I am at this point fairly satisfied with the sound performance I am getting out of my SD45-2's. The only real beef I have is having to restart them everytime...
When you programmed the values of CV17 and CV18 what values did you use? The most likely problem you encountered was using values that were incorrect, in...
Chris, I just received my PR2 a few days ago and I have not been successful using it. Although I have no new Digitrax Sound FX decoders, I expected the unit to...
I would imagine that the primary purpose of the PR2 is the loading of the decoders sound files and not intended for much of anything else. According to the...
A question was asked a while back about CV definitions. Thanks to Bob Jacobsen over on the JMRI list here are the links on the JMRI site that give a detailed...
Hi Robert and Keith Robert. I don't know how you came up with the values of 235 and 2 for CV 17 and CV 18 respectively or a 4 digit address of 5506. Don't work...
From: "David Keith" <dckeith@...> Confession! I did this (before sending inquiry)... When I powered up the loco and hit F0, the headlight flickered (or...
Hi, From New Zealand, I will add 1 more to your list Mike, as I too have had a DZ123 pack it in on the test bench, The only decoder to have problems with, ...
I am having problems getting power into a track. Here is the situation. I have a Peco Electrofrog #5 RH Switch with Atlas Code 100 Flex Track. I have power on...
Chris, I was one of the original beta testers for the PR2 and I found the way the PR2 connected to the real world unsatisfactory. This has in no way hindered...
[Non-text portions of this message have been removed]...
kwifish@...
Sep 3, 2006 12:17 pm
103805
Based on your description, my "minds eye" tells me there's no drop lead from the mainline (flextrack?) to you buss. Adding a drop lead from the flex track to...
Randy, Without knowing more I suspect that you are feeding power from the frog side of the turnout instead of the point side. This will definitely cause a ...
After much debate with myself and using a NCE system at a friend's layout, I decided to go with Digitrax rather than NCE. I am converting my layout over from...
I think a picture would help this discussion. http://www.cuttergraphics.com/N-trak/Switches.jpg I'd also like feedback on the DCC Friendly portion. Did I draw...
After much debate with myself and using a NCE system at a friend's layout, I decided to go with Digitrax rather than NCE. I am converting my layout over from...
Our club is moving more and more from DC to DCC so it is time to take a hard look at our requirements. We are looking at one DCS 100 for control and three to...
Arnold: Think tree, well two actually. The first in the discussion is the power tree. First the booster/command station DCS100/200 or DB150. The track power...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
