Ben, I will go out to the boat later today so will take some pictures for you. Paul ... anybody ... involved with that ... trouble ... the v-berth ... and if...
A cutter rig was added to our boat after the fact partially by the previous owner and partially by me. The kit was purchased from PSC which was basically the...
Enter your vote today! A new poll has been created for the Dana_Owners group: There seems to be a connection between people who own a Dana and BMW ...
Dana_Owners@yahoogrou...
Jul 3, 2004 10:14 pm
1600
Could anybody help me understand my depth meter from autohelm? It works great but I can not get the alarm to stop. I think the instrument is from 1992 and came...
I have the ST30 speed and depth meters on my Flicka. According to my manuals any button press will silence the alarm (either shallow or deep alarms). You can...
I have been searching for a Dana to buy for a few months now and have looked at a few and really like the design, manufacturing, etc. I want to trailer the...
Mark, I have a Dana and a Triad trailer made to my specs, and have accumulated probably 7000 miles so far in 1 1/2 yrs-- mostly statute miles, unfortunately....
cappy In anser to you question,I have a Dana on a 3 axel trailer and have pulled it to Maine,New York,Fl. all over Mi. It might even be for sale,contact me at...
All, Well today while on the boat, I checked the log, I have sailed We Shall See II over 1000 nautical miles on the lake! Can not wait to put her in salt...
Greetings, Has anyone had experience and/or success with installing a counterpoise/ground plane for SSB transmission? I know the dynaplates are probably the...
Ken When will you be in northen Michigan, We will be in the straights area heading for the North Channel during the week of july 25th. Kelly Roscher s/v...
Hi, I have never experieced the Dyna-plate, but I use copper grouding foil connected from the antenna tuner at the port side locker to the rudder post and the...
You are very kind, I am also a weekend carpenter, it took some planning, also tried out the design and joints on some scrap first, resin thickend with teak...
I am considering purchasing a late model Dana 24 and wonder if there are issues involving the following areas that should be considered as potential problem...
I have had my Dana for nearly a couple of years now, could not be happier, I have had no trouble with any of the systems on board, although I have kept her...
Depending on where you are located, it may be of interest to you to contact the Pacific Seacraft factory and arrange for a tour of the facility. It would give...
Well, first an update, I finally got around to installing the salt water faucet, or lake water currently. I took the outlet hose fitting off the raw water...
... I've never swung a compass, but when I'm lined up on a known bearing, like a range marker, I try to notice whether the compass is significantly off....
Russell, Thanks for the comments on the compass, In my old days on racing boats before GPS, we used to have deviation table for the main compass. The url for...
Any clues where to inquire about the "Muir Neptune" manual windlass that was discussed in past messages? Used would be fine as long as it works. Bob...
Is there anyone who has successfully gotten the zippers in the ceiling of the cabin working again after years of non use? I have unsuccessfully used all kinds...
Albert, I had a frozen zipper on my headliner as well, Dana 1986. I ended up having to remove the zipper slider, I think I used needle nose pliers, and...
Has anyone had over-heating problems with running their engine to charge their batteries while sailing on starboard tack? It seems that the raw water intake...
... that ... The ... appreciated. ... Hi Chris, I never experienced that problem. And I don't know exactly why it happens on starboad tack only. I recommend...
I am considering retrofitting (fitting where none has been fitted before) a water heater in my Dana. The unit I am considering is an IsoTherm Slim 15 -- a...
I've got the factory setup and will be glad to take a few digital photos next week and email them to you. I'll probably learn something in the process as my...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
