Thanks PeAk, I used the table for the values. I used the older version that did not account for the overshoot. the DVD specifies 2 Vrms output and puts out...
I think I figured out your problem...it looks like you might have swapped the 20K and the 12K, resistors inadvertently. I worked out the parameters and you...
There is a very pragmatic reason indeed: I finally started on some modding and the first thing I changed were the connectors. Unfortunately I could not find...
Thanks PeAk. But this is what I have and checked with the meter off the resistor on the board R17,R16,R23,R21=823 R14,R22,R15,R20=12K R19,R24,R13,R18=20k per...
Everythings seems fine on paper...I'm baffled. I guess you sorted out the resistor locations from the board markings. It would be nice to have a component...
I would check your digital power supply to make sure its close to 5V. I suspect a blown capacitor for the hum yo mentioned before. Hope this helps. ... ...
Not the last word in what is possible from the DI/O, the "Volks_DI/O" Standard refers to a combination of "easy" changes that will get you to about 90% of the...
A basic disagreement, my opinion of course: without the uprated transformer, Stancor or equivalent at a minimum, you can not begin to approach the potential of...
Craig, thanks for your thoughts. I sort of expected some feedback of this sort so here goes: I cannot comment on approaching the "potential/summit of DI/O...
Hi Ray, Well, I'm extremely (for me) promotional of power related stuff for digital gear. It is very ear-opening the difference that relatively inexpensive...
Ray and Craig, I'd like to chime in on the same side as Craig in this discussion. I applaud the work that both of you have done to document the saga of DIO...
hi peak, getting a digital 75 ohm cable, & a better power supply really *IS* a no-brainer, & should be done by *anyone* using a di/o, modded or otherwise,...
Hey Craig, I'm in agreement with you about the influence of power supplies and many respected ears have echo your sentiments about updating to a Stancor 3.4A...
Gary, these boards are opinions....mine somewhat more prolific but definitely not the last word on what is possible withthe DI/o. I found that there is more...
and agree with the philosophy. The Hosfelt trannie is more in keeping with that. And the $10 RS digital cable (or a free Belden 1695A sample). I think I pretty...
Ray, I understand your comments, but let me put it simply. I think you are getting ahead of yourself when you make statements such as the following, which I...
I captured some of "clarifications" coming out of this thread and have updated the initial "Volks_DI/O" section both in content and in organization. It should...
I have a friend's DI/O that I "Volked" for him (75 ohm digital input resistor, Shottky diodes, jumped output caps, Stancore power supply). He's using a very ...
Greetings folks, I get the forum postings sent by the daily digest, so I was unable to “voice” my opinions in a timely manner, but as it turns out, they ...
Hello everyone, I have three ps tranny questions: 1. Is the Stancore power supply better than the Hosfelt (Atari)? 2. Is the jack of the Atari compatible...
-Hi I have just bought a "virgin" DIO and ordered a Hosfelt Atari.... The jack fits perfectly, and it is a significant improvement IMHO. Well worth $4! Steve...
Anyone know if it is ok still to take out the output caps, once biased into class A with the LT chip. Wayne at Bolder cables over on Harmonic discord was...
Sorry guys, another query (can't you tell I am itching to get going!) On the Bolder cable web site, Wayne mentions bypassing the power supply caps to prevent...
Parts Connection has some nice ones and they're relatively cheap too, especially if you're going to be getting Shottky diodes and resistors (Holco metal films)...
I had a problem when I removed the output capacitor (not filter) using a tube Conrad Johnson pre amp there would be a noise when changing volume levels. i...
Gary, if i look in the mirror I see myself with my pants down. You are right about not have heard Wadia or Meridian head to head in my system. I have only...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
