Glad to see the site is back, I wish the old files and databases were back too. There was plenty of info there. Many years of tech notes and advice. Maybe...
Dear fellow Columbia owners, Help, I'm stuck! I can't find a mast step that is the correct fit for my 1970 26 Mark II's mast, which I am rewiring, painting,...
Have you checked rig-rite (www.rigrite.com)? They carry just about everything for masts, and if they don't have a step that will fit, they can make a custom...
I just finished a much needed topsides paint job on my '71 mk2. This boat had a more graceful transom added at some point, but the paint job after this...
I am looking a set of used sails for the ole Columbia...my father and I are rehabing one and need a set of sails. Our boat came with a Catalina 25 main and...
Brian, I may be able to help you on a jib. Give me a day or two to check with my friends who have extra sails. Frank Schenk Agape C26 MKII Grapevine Lake ...
Structurally, it's a plywood box that was added to the existing transom, and faired in. The backstay chain plate still attaches to the original bulkhead. ...
Has anyone put a roller on the bow for stowing an anchor? We have a Danforth, but I'd like to get the boat set up to carry an anchor on the bow. What roller...
Does anyone know how to remove the rub rail off my 26MKII? It needs a thorough cleaning and painting; lots of crud, old sealant, so I'd like to disassemble it,...
Rather than clean it, you may as well just replace it. I believe you can still buy that rubrail insert from someone. I recall a few years ago on this list...
It's a rigid boom vang. The part on the right attaches to the underside of the boom (there are probably holes where it used to be). The other end probably...
Hi! Glad to see this new forum up and running. I have a '70 C-26 mk2. I've been reading that in-hull (shoot thru) depth sounder transducers can be installed in...
I have a 71 C26 MKII and it does not have a cored hull. I mounted the transducer on a glob of silicon and it works very well. Frank Schenk Agape C26 MKII ...
Thanks Frank, where did you end up mounting it in the hull? I was thinking about puting it under the V berth. I read you can test the transducer by filling a...
I put mine in the starboard locker because that is where the instrument is located. My readings are about six inches too low but I would rather get a low...
Hmmm...that was my thought, that it would be better located as far forward as possible. I guess 15 feet probably won't mean the difference between going...
I have a Hawkeye that's supposed to work as a shoot-thru. I actually found a spot in the starboard locker that worked when testing (with a water-filled bag) ...
I mounted both my depth and speedo transducers under the vee-berth. There's good access there, and they aren't subject to damage the way they would be in my...
Under the vberth does seem like a logical spot. Unfortunately despite interminable sanding of the glasswork there I was unable to get a reading when testing. ...
So what is the best way to test the transducer before mounting? I tried the water filled zip-lock with limited success. Perhaps the fiberglass needs to be...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
