THANK YOU VERY VERY VERY MUCH!!!!!!!!!!!!!!!!!! it was great help Chris it was done in 1min aftre 2 days of........ KINDEST REGARDS bosko ... From: klickcue...
Hi, If this can help to you, I think it will! Best regards Mario Sambol ... From: ZDENKO BOSKOVIC To: CNC_Toolkit@yahoogroups.com Sent: Friday, June 05, 2009...
Hello Rab. All.. Rab, I've been experimenting with spline displacement as a faster way of creating toolpaths from certain types of mesh detail... i.e if a...
Hi Danny, That's a really good method of working, A direct spline to toolpath conversion function would be very useful for this and also for the likes of...
I have a 5 axis homemade mill (2 rotary axis B and C are on the head of the gantry). I am trying to post-postprocess a G code output that unfortunately does...
... If you are using this code on a machine with a PC-based control, you might want to take a look at EMC2 <http://www.linuxcnc.org>. Depending on the...
Hi John, Use the offset around B-axis to account for your cutter length, see the top right diagram on this page; http://www.cnc-toolkit.com/support.html Rab...
Hi my name is Kelly. I am new to the gvroup thing. I am hoping to get some good info on 5 axis machining. I have a 5'x10'thermwood router. And I am looking for...
I have a great product called t-flex the cad and Cam cost 5000 and can be post processed for your Machine. Www.t-flex.com. I work on thermwoods what are Your...
... Hi my name is Harko. I have a product that is great for 5 axes contouring it is called T-flex. Let me know the type of parts that you want to cut and I...
... this looks like a good cad cam program, but what does it cost? I do mostly simple parts that dont require a lot of cad work but do require the 5 axis cam...
Here is one, I have not used them http://www.doughtydrive.com/index.html From: CNC_Toolkit@yahoogroups.com [mailto:CNC_Toolkit@yahoogroups.com] On Behalf Of...
Hi Kelly T-Flex Cad costs 2500 and Cam 2500 which is 5 axis cam. You would be hard pressed to find a product that can do 5 axis cam properly for less money. I...
I refer to a gantry type machine with a B and C axis on the head. Does the Z axis and the B axis must intersect for the toolkit to work? What should be the...
I've built 3 CNC plasma tables "the cheap way", and have vowed to never do it again (the cheap way). I've been collecting various motion control parts for the...
... I didn't see that one before. Did you use CNC Toolkit to generate the gcode? Did you consider using the DG series actuators from oriental motor? Grant...
You might also want to look at Rhino 3d with Madcam for your cam. Madcam is a plugin for Rhino. Cost of Rhino varies from $800 to $900 and Madcam Professional...
Hi John, The post-processor can be configured to account for this type of thing although I'm assuming that you're perhaps referring to the pivot point of the...
I looked through the files section of the group, I could not find the toolkit. Where does one get the CNC Toolkit? Thanks -- John Guenther 'Ye Olde Pen Maker'...
Rab I am trying to figure out what is the proper homing position for the C axis when B and C axis do not intersect. My question is what of the following two...
I noticed that the toolkit has changed since I have used it. Is there an XYA machine configuration option in the new toolkit or do I need to use the 3.19...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
