RVers!! It's coming up!!!!!! EAA106 is hosting an RV and Canard fly-in at Lawrence Airport on July 15th. This is the fifth year that we've held the fly-in and...
re: 2006 NorthEast RV and Canard FLY-IN w/ 11 Seminars - Sat. July 15th (rain date July 16) Hi everyone -- My apologies -- After Bob sent out our poster, I...
Yahoo strips out the attachments. I'd be happy to post the flyer if I had it. ... From: Bob D To: RV-8 ; BostonRVBuilders ; Mid-AtlRVwing@yahoogroups.com ;...
I need to buy oil cooler hoses for my IO-360. I've found that the fittings on the engine are #6 flare and the oil cooler is #8. The hoses that came with my...
Greg, It's the first time I've heard of #6 lines for the oil cooler. Can you change them out? I'd worry about adequate flow since the viscosity of the oil at...
Guys, I have only two volunteers for this Saturday's fly in. We can do better than that. I need a couple of hours of your building time to spend at Lawrence to...
Bob, I should be flying in with Scott Jordan on Saturday morning, and can help out Scott parking planes for the morning. Dave Rogers RV-4, N97RT RV-8, N173DR...
Below you will find a list of SEMINARS at 2006 NorthEast RV & Canard Fly-In hosted by EAA106 We had previously listed 11 seminars, but one speaker was in a...
Bob, I am a member of EAA 106 and have volunteered with Penny Tony ... From: Bob D To: BostonRVBuilders Sent: Wednesday, July 12, 2006 8:50 PM Subject:...
Hi Greg, I used -8 fittings on the oil lines. the threded holes in the engine will take 3/4" NPT fittings. replace the fittings and use 1/2" hose(-8). I just...
I could change them out but I can't find a fitting to step up from the #6 on the engine. I think the #6 on the engine is part of the Christen inverted oil...
Dave, Are you bringing the 4 Saturday ? Look forward to seeing it... I volunteered with Penny also. Should be there pretty much all day. I plan to (again)...
Hi John, Yes I'm planning to fly the 4 in with my other co-owner in the back. See you there ! Dave Rogers RV-4, N97RT (flying) RV-8, N173DR (fuselage) ... ...
Excellent, Dave. See you there. Bob ... From: BostonRVBuilders@yahoogroups.com [mailto:BostonRVBuilders@yahoogroups.com]On Behalf Of David Rogers Sent:...
Guys going to OSH: If someone could pick up any information on the Egg Subaru engine for the RV-10 and scan/email/whatever it to me I'd greatly appreciate it....
Jim: I studied the Eggenfellner conversion extensively before deciding on Lycoming. Here are the pros and cons as I see them: Pro: - Jan Eggenfellner has the...
Hi folks, I'm nearing completion of my RV8A and the insurance company is requiring me to have 2 hours in any tri-gear model RV to get coverage. Is there anyone...
They really want a check-out? That's kinda nutz. The RV series fly very similarly to the Tiger. A bit easier I think, all the systems are very similar as...
Dave -- I know exactly who Bruce is describing as the RV-8A in the Blue Angles paint scheme ... Another in our EAA network ... Charles Rowbotham who is...
Actually, the RV's are a bit more like the Grumman Yankee (2 seater) with respect to how they feel during landing flares, speeds over the fence, and approach...
Eurika! Mike Seager (RV factory transition instructor) will be coming to Oswego with is RV-6A for the annual EAA 486 fly-in. You should contact him about...
There is also an RV-8A at Wiscassett (IWI). I think he is a member of my EAA chapter and the meeting is tonight, so perhaps I can get a contact name....
Thanks everyone! I appreciate all the info. It looks like I'll get some time in a -8A in September. A lot of people have recommended Mike Seager so I'll try...
... I didn't know I was that old! Ehh gads. Actually I self insured for the first few flights of my RV-3 cause I had the same problems you did. I've probably...
Anyone need to borrow a professionally made RV-8 fuselage jig ? If so, e-mail me directly at davidrgr@... Dave Rogers RV-4, N97RT (flying) RV-8, N173DR...
Thanks Greg! I need to arrange for inspection. Just a couple of nagging details yet to work out. I'll let you know how it goes. Talk to you later, Dave ...
Need some electrical help. I have RAC electric aileron and elevator trim. I am installing the RAC rocker switches and LED indicators in the panel, and a 4-way...
Carsten, I got good wiring diagrams with mine when I bought them (they were MAC back then). The drawings are at the airport but I could fax them to you...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
