I have to replace the plastic inside the navigation stern light. Does anybody knows where might be possible to find it? Does anybody knows if they are made by...
I am not sure about the lights, but all the bronze fittings on KIKI are Perko products.  I still have the originals and the color and the finish is the same...
Increase Your Height 2-3 Inches How a New Discovery Made A Short Man 2-3 Inches Taller In 6 Weeks I Discovered the Secret to Add Several Inches of Solid Height...
I did looked into the Perko line first thing, but I couldn't find anything similar. The closest match was J.M. REINECK & SON. Let's see when I get the parts....
After reading the replies, I think my memory has failed me again. Sounds like WC is your best bet. Frank ... After reading the replies, I think my memory has...
I would like to replace the toerail, but sadly I think that on my boat it is bolted down, the nuts are (useless to say) not accessible in most cases. I was...
Hey, I am replacing the mahogany on my BW14 project. I had only one stubborn bolt and used my Dremel Multi-Max on it. I cut slightly high so that I wouldn't...
Diego, Several of us have had to deal with this problem of toerail replacement. The easy thing to do is to persuade a small person like a child to enter the...
Diego I've been meaning to write this up for the Yahoo! group anyway, so here goes: You have to take off the side shelves to get to the toerails in way of the...
BLESS YOU BRENT!!!! I was wandering how skinny people at BW might have been to be able put together the boat. If I try to get under the cockpit I will never...
We had a flexible socket extension at Bluewater, about 12" long, that really, really helped putting the nuts on. I've looked for one off and on over the years...
Actually a I had to be creative and put together a 10" extension+3" extension + deep socket 3/8" and still it is not easy (a 20" available at Lowes, is too...
Thanks for the tips on how to get to the nuts around the cockpit area. I also used a variety of extensions on my 3/8" drive ratchet to access the nuts. I was...
Yes, Chuck and Brent, you are probably correct, I think those nuts add to the hull deck bondage. I couldn't see clearly, but it felt there were less nuts...
ok, I removed the screws and I have been wrestling with the shelf for quite some time. I can only move it forward or backward less than an inch, not enough to...
Diego, FWIW, I took my shelves out about 3 years ago, and remember having to remove all of the wood attached to the shelves before being able to get them ...
Screws are all out, wood trim also but the sucker is moving freely back and forth about an inch, but no more than that. The entire side shelf should slide...
I just noticed that RigRite.com has a new style of jib boom pedestal - sounds more like what was used on the later Blackwatches when the bronze castings became...
Anyone have any idea of the weight capacities for the Blackwatch 24? Need Total weight capacity, total person capacity, total weight per person, and total...
I can't believe that PA is makeing you come up with these specifications!! They seem to be treating the boat the same as a flat-bottomed Jon-boat!! Let's...
From a 'practical' standpoint, when I've been out with six adults, gear, beer, and other odds & ends, the boat preformed just fine. However, she tended to...
Thanks Dave! I'll try those numbers. I'm going to go and talk to the PA Fish and Game Commission in Harrisburg, PA next week. My last sailboat did not...
Howdy, I assume you are thinking about a transom mount. I wonder if it will interfere with the rudder movement if you are thinking about the stern. I have...
Hi, I was visiting marine shops last week because I wanted to do the same. The ladders that I saw were not impressive as a construction. The one that you...
