Peter, MINQUAL (in the main section of the config) applies to all NETROM neighbours , and MAXHOPS and MAXRTT apply to all INP3 neighbours. You can reduce the...
9956
John Wiseman
gm8bpq
Mar 10, 2013 9:41 am
Hannes, As has been suggested by others, the BBS feature will do this. To provided it as a separate function would mean duplicating the code that accepts ...
9957
John Wiseman
gm8bpq
Mar 10, 2013 9:47 am
Jerry, The low power version (100 mW) of RFM based board is working pretty well. The 1 watt version is still not reliable - I suspect either a power supply ...
9958
Peter - ZL2BAU
zl2bau
Mar 10, 2013 10:12 am
... Hi John, One does not remember how much one has forgot until the required information is needed. Thank you John, that is one less problem I have to solve. ...
9959
Jim
wu3v
Mar 10, 2013 11:03 am
Hmmm data engine and a argent uhf txrx? ... From: John Wiseman To: BPQ32@yahoogroups.com Sent: Sunday, March 10, 2013 09:47 AM Subject: RE: [BPQ32] Speaking of...
9960
James Mcdowall
g7icd
Mar 10, 2013 11:06 am
is it possable to edit the NodeIndex.html colours etc ? cheers jim...
9961
Daryll Webb
kg9nd
Mar 10, 2013 2:48 pm
My Kenwood 261 has been running 24/7 for about one year on 145.530Â Â Â no trouble yet. Buster kg9nd ________________________________ From: Jim...
9962
zl1lw
Mar 10, 2013 7:01 pm
Hi group, I am attempting to get LINMAIL running on my existing functional LINBPQ node running on UBUNTU 12.04 LTS. I added LINMAIL and BBS=1 as an entry into...
9963
John Wiseman
gm8bpq
Mar 10, 2013 7:48 pm
There is a parameter missing from your USER line. The format is USER=user,password,callsign,"", SYSOP. It should by TCPPORT not TELNETPORT (but that won't...
9964
Richard
zs6ro_dick
Mar 10, 2013 8:15 pm
John, don't bother with the request below - I figured out another way to achieve the same results which was quite elegant and easy to do .. 73, Dick ZS6RO ...
9965
CJ Hanekom
zl1lw
Mar 10, 2013 8:24 pm
Thanks John, All fixed and able to login. Now to figure out how to set it up :) Regards Hannes ZL1LW...
9966
Jerry
n9lya
Mar 10, 2013 8:35 pm
John Things are much better after rebuild of forwarding Scripts. I made a back up today as it is now working well.. Not knowing how to tell easily when it goes...
9967
Daryll Webb
kg9nd
Mar 10, 2013 9:26 pm
Hello to all We are running a Kenwood D700 at our ema used as bpq node. It is a duel band, can bpq32 control witch band the radio uses? Say A band =...
9968
n9acq
Mar 10, 2013 9:48 pm
Buster The one problem I see is the need to take the D700 out of TNC mode to change frequency and then turn on TNC mode, if using D700 internal TNC. better to...
9969
Daryll Webb
kg9nd
Mar 10, 2013 10:18 pm
Jest thinking out side the box. One side is packet via kcp 2Â in kiss. The other is voice local Races/sky-warn rep. By controlling radio band via bpq32 would...
9970
zl1lw
Mar 10, 2013 10:46 pm
Hi Guys, Okay, I have LINBPQ MAIL feature running, I did the setup of the BBS parameters using the HTTP interface. Now my next hurdle, How do I connect to the...
9971
n9acq
Mar 10, 2013 10:48 pm
Buster As long as you use an external TNC the buffer problem is not relevant. Not sure if the D700 will allow one side to use the6 pin din and the other side...
9972
Peter - ZL2BAU
zl2bau
Mar 10, 2013 10:53 pm
Hi All, This question has been ask before but I hope there is some new info available. How does one forward to another BBS via internet when the station is not...
9973
Joel Yates
jyates5635
Mar 10, 2013 10:55 pm
You don't as far as I can tell. ...Joel N4JOA Sent via BlackBerry from T-Mobile ... From: Peter - ZL2BAU <peter.zl2bau@...> Sender: BPQ32@yahoogroups.com...
9974
John Wiseman
gm8bpq
Mar 10, 2013 10:59 pm
You can't set TCPPORT and FBBPORT to the same number. Assuming you have defined the BBS as application 1 all you should need is APPLICATION 1,SYSOP 73, John ...
9975
John Wiseman
gm8bpq
Mar 10, 2013 11:02 pm
If it is reachable via a node that is in your table, then a connect script will do it. if not, you can't John _____ From: BPQ32@yahoogroups.com...
9976
CJ Hanekom
zl1lw
Mar 10, 2013 11:14 pm
Thanks John, I amended the application line as suggested APPLICATION 1,SYSOP Now when I type sysop at the command line I get TORBAY:ZL1LW} Sorry, Application...
9977
Daryll Webb
kg9nd
Mar 10, 2013 11:43 pm
I will go into the manual one more time and see if I have missed something. Bill  thank you    you have givin me some other things to read about and...
9978
John Wiseman
gm8bpq
Mar 11, 2013 12:03 am
If it said it started, then if probably did. Check that you have set BBS Appl No (to 1 in your case) and Streams (The number of simultaneous connects to allow...
9979
CJ Hanekom
zl1lw
Mar 11, 2013 12:16 am
Thanks John, I had the application in the BBS setup set to 8.I changed it to 1 and all is now working fine. Thanks for all your kind assistance. Regards Hannes...
9980
Richard
zs6ro_dick
Mar 11, 2013 8:09 am
John, note the versions don't match the BBS [BPQ-6.0.0.97-IHJM$] .. 73, Dick ZS6RO ================================= RONODE:ZS6RO-14} Connected to BBS ...
9981
John Wiseman
gm8bpq
Mar 11, 2013 11:55 am
Yes, I failed to edit all the version strings.. There is now a .99 that fixes this. John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On...
9982
Matt VK2RQ
matt_vk2rq
Mar 11, 2013 3:23 pm
I noticed that my LinBPQ (v6.0.0.100) crashes when I issue the "AUTH" command from inside the BBS. I am trying to gain remote SYSOP privileges, and so I...
9983
John Wiseman
gm8bpq
Mar 11, 2013 5:03 pm
Thanks, Matt. AUTH needs a parameter (the one time password) and the validation didn't work the same on Window and Linux. This is fixed in version 101. which...
9984
Charles Brabham
n5pvl
Mar 11, 2013 5:16 pm
I just use amateur radio, and avoid that sort of difficulty. 73 DE Charles, N5PVL ... From: Peter - ZL2BAU To: BPQ32@yahoogroups.com Sent: Sunday, March 10,...
