Dave,

 

Making it monthly would be easy enough, but a breakdown by type would need more work. I'll look into it.

 

73, John 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
Sent: 13 February 2013 20:46
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Traffic reports

 

John
Is there any possibility of setting up the weekly traffic reports to be
monthly and to break down the messages sent and received by type? (IE: P
B or T)
73
Dave
WB2HVF / AFA2HV

The W1FJI BBS will be down until further notice.
I have had to change ISP's again, and my radio has developed an audio problem
and needs to be replaced.
Tks,  73,  Art W1FJI

 

Dave,

 

Making it monthly would be easy enough, but a breakdown by type would need more work. I'll look into it.

 

73, John 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
Sent: 13 February 2013 20:46
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Traffic reports

 

John
Is there any possibility of setting up the weekly traffic reports to be
monthly and to break down the messages sent and received by type? (IE: P
B or T)
73
Dave
WB2HVF / AFA2HV

-- K.O. Higgs n0kfq@...

 

If I change it I'll make it configurable.

 

John

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K.O. Higgs
Sent: 14 February 2013 21:37
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] Traffic reports

 

If you make it "monthly", please make it also still available as a "weekly" report and in the same format as it now is for those of us that find it useful in its present form.

K.O. n0kfq

On 2/14/2013 12:56 PM, John Wiseman wrote:

 

Dave,

 

Making it monthly would be easy enough, but a breakdown by type would need more work. I'll look into it.

 

73, John 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
Sent: 13 February 2013 20:46
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Traffic reports

 

John
Is there any possibility of setting up the weekly traffic reports to be
monthly and to break down the messages sent and received by type? (IE: P
B or T)
73
Dave
WB2HVF / AFA2HV

-- K.O. Higgs n0kfq@...

-- K.O. Higgs n0kfq@...

 

Thanks...

K.O.

On 2/14/2013 3:50 PM, John Wiseman wrote:

 

If I change it I'll make it configurable.

 

John

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of K.O. Higgs
Sent: 14 February 2013 21:37
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] Traffic reports

 

If you make it "monthly", please make it also still available as a "weekly" report and in the same format as it now is for those of us that find it useful in its present form.

K.O. n0kfq

On 2/14/2013 12:56 PM, John Wiseman wrote:

 

Dave,

 

Making it monthly would be easy enough, but a breakdown by type would need more work. I'll look into it.

 

73, John 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Dave
Sent: 13 February 2013 20:46
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Traffic reports

 

John
Is there any possibility of setting up the weekly traffic reports to be
monthly and to break down the messages sent and received by type? (IE: P
B or T)
73
Dave
WB2HVF / AFA2HV

-- K.O. Higgs n0kfq@...

-- K.O. Higgs n0kfq@...

 

How to enable???

 

Thanks Jerry

Hello to the group,

I have not a solution, but I want to say that I have the same problem with
linking nodes. I hear the other side, there are connections between my and the
other node, but if I want to connect, I get a Link failure. Even so, the other
node is not listed in my broadcast. There seems to be a link between the nodes,
but that's all, I can't connect the other side.

I try many options, TCP-IP options (master/slave), other UDP-ports, connect my
PC direct to the internet without a router and so on, nothing seems to work.

73,

Roland.

--- In BPQ32@yahoogroups.com, "James Mcdowall" <james.mcdowall4@...> wrote:
>
> Still having problems trying to link to you Ken try the cfg etc but no joy
>
> Cheers Jim
>
> MAP G7ICD-7 jimspc.no-ip.org 93 B
> PS The strange thing is from the pc i can ping your ip no problem
>
>
> --- In BPQ32@yahoogroups.com, "kenny"  wrote:
> >
> > Hi Jim
> > map my xrouter node that should give you enough nodes
> > MAP GB7COW-5 gb7cow.dyndns.org UDP 93 B
> > or my Bpqmail Node
> > MAP GB7COW-3 gb7cow.dyndns.org UPD 93 B
> >
> > let me know your MAP details so i can add them into my .cgf
> >
> > 73,Ken G7VJA
> > GB7COW
> >
> > --- In BPQ32@yahoogroups.com, "James Mcdowall"  wrote:
> > >
> > >
> > >
> > > --- In BPQ32@yahoogroups.com, "James Mcdowall"  wrote:
> > > >
> > > > Hi all
> > > >       can anyone help me with linking I have setup a 2 port node on 70cm
and 2 meters is there a way i can get a nodes list via internet?
> > > > thanks for any help you can give me
> > > > cheers Jim de g7icd
> > > >
> > > i think i have the network link set up now all i need is some one to give
me access to there nodes list please
> > > cheers jim
> > >
> >
>

Hi Roland
the problem i had with G7ICD-7 has been resolved and all is working well.
he gave me the wrong Map address it was missing one character
it was jimspc not jimpc.

re your problem,most of the time when you get a link failure
it means the other station has lost its connection to your node or
vice-versa,yours has lost it connection.

try linking to my bpq
MAP GB7COW-3 gb7cow.dyndns.org UDP 10095 B

let me know your Map details

73 de Ken
g7vja - gb7cow

Hello Ken,

Thanks for the reply and the MAP-link.
I try it, and... it works! I tested even so with another station and that also
works...

Very strange, but I'm now for sure that my configuration is right and working.

My server-details: MAP PD2RLD-10 SERVER.PD2RLD.NL UDP 93 B

73,

Roland, PD2RLD.

--- In BPQ32@yahoogroups.com, "kenny" <ken@...> wrote:
>
> Hi Roland
> the problem i had with G7ICD-7 has been resolved and all is working well.
> he gave me the wrong Map address it was missing one character
> it was jimspc not jimpc.
>
> re your problem,most of the time when you get a link failure
> it means the other station has lost its connection to your node or
vice-versa,yours has lost it connection.
>
> try linking to my bpq
> MAP GB7COW-3 gb7cow.dyndns.org UDP 10095 B
>
> let me know your Map details
>
> 73 de Ken
> g7vja - gb7cow
>

On Sat, Feb 16, 2013 at 3:47 AM, John Wiseman <john.wiseman@...> wrote:

>
> The latest Windows version is 5.2.9.1. A new one should be out soon.
>
> The Windows code has had a Web interface to the node and aprs features for
> a while now. The Web interface to the BBS and Chat will be added eventually.


This will be very useful to add a user interface on legacy packet to
HSMM-MESH (NW-MESH here.)   I'd buy you (John) a pint of encouragement
but I wouldn't want to slow progress...

73
Bill - WA7NWP

----- Original Message -----

From: John Wiseman

To: BPQ32@yahoogroups.com

Sent: Sunday, February 17, 2013 12:21 PM

Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The Windows version has two SYSOP-mode commands, RECONFIG and REBOOT. The Linux Version has RESTART, which actually just shuts LinBPQ down, and expects the OS to restart it (for example by using INIT).

 

The Linux version, and the next Windows version have a way to connect to a shell/cmd session over the network. This allows editing of config files. Packet links are really too slow for screen editors, but a line based edit is feasable (anyone remember EDLIN?)

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 17 February 2013 00:35
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again. Was able to get right in. Intuitive and works well.

This type of access brings to mind a requirement I have been attempting to resolve. I have a need to remotely update the Telnet USER and AXIP MAP lists. The nodes are located in places where access is extremely difficult. I have been attempting to use HSMM-MESH and a Remote Access tool to edit the BPQ configuration file and then activate them. This works but if the path quality degrades then the Remote Access stalls.

I understand and use the Reconfig options from the various BPQ menus but is there a way to force a Reconfig remotely? A hidden command? other?

I will appreciate any feedback you can provide. Thanks again, I will put the web interface to use.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 7:44 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Ok, Dave.

 

There isn''t much documentation about it - just a mention in the release notes.

 

To enable it add an HTTPPORT=nnnn to the Telnet Server config (or add a telnet server if you don't already have one defined)

 

Then connect to 127.0.0.1:nnnn with a web browser. There are pages to display various node tables, and a terminal.

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 16 February 2013 14:10
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again for the prompt reply.

I have completely missed the Windows Web interface. Please point me in the right direction.

I sometimes have a problem with things hiding in plain sight...

I really appreciate all the work you do.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 4:47 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The latest Windows version is 5.2.9.1. A new one should be out soon.

 

The Windows code has had a Web interface to the node and aprs features for a while now. The Web interface to the BBS and Chat will be added eventually.

 

73, John

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 15 February 2013 23:47
To: BPQ32 Yahoo Group
Subject: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Gentlemen,

With all the traffic about the LinBPQ (in which I am also interested) what is the current version for Windows BPQ? 5.2.9.1? or other?

I presume the discussion about the web interface only applies to LinBPQ? Is this in the plan for Windows?

Just want to make sure I did not miss something.

73, Dave.

WA7RYV

----- Original Message -----

From: Jim

To: BPQ32@yahoogroups.com

Sent: Sunday, February 17, 2013 11:01 PM

Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Packet links are really too slow for screen editors, but a line based edit is feasable (anyone remember EDLIN?)

 

Uh huh and shell scripts.....

 

Showing my age......

 

Jim

----- Original Message -----

From: John Wiseman

To: BPQ32@yahoogroups.com

Sent: Sunday, February 17, 2013 12:21 PM

Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The Windows version has two SYSOP-mode commands, RECONFIG and REBOOT. The Linux Version has RESTART, which actually just shuts LinBPQ down, and expects the OS to restart it (for example by using INIT).

 

The Linux version, and the next Windows version have a way to connect to a shell/cmd session over the network. This allows editing of config files. Packet links are really too slow for screen editors, but a line based edit is feasable (anyone remember EDLIN?)

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 17 February 2013 00:35
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again. Was able to get right in. Intuitive and works well.

This type of access brings to mind a requirement I have been attempting to resolve. I have a need to remotely update the Telnet USER and AXIP MAP lists. The nodes are located in places where access is extremely difficult. I have been attempting to use HSMM-MESH and a Remote Access tool to edit the BPQ configuration file and then activate them. This works but if the path quality degrades then the Remote Access stalls.

I understand and use the Reconfig options from the various BPQ menus but is there a way to force a Reconfig remotely? A hidden command? other?

I will appreciate any feedback you can provide. Thanks again, I will put the web interface to use.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 7:44 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Ok, Dave.

 

There isn''t much documentation about it - just a mention in the release notes.

 

To enable it add an HTTPPORT=nnnn to the Telnet Server config (or add a telnet server if you don't already have one defined)

 

Then connect to 127.0.0.1:nnnn with a web browser. There are pages to display various node tables, and a terminal.

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 16 February 2013 14:10
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again for the prompt reply.

I have completely missed the Windows Web interface. Please point me in the right direction.

I sometimes have a problem with things hiding in plain sight...

I really appreciate all the work you do.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 4:47 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The latest Windows version is 5.2.9.1. A new one should be out soon.

 

The Windows code has had a Web interface to the node and aprs features for a while now. The Web interface to the BBS and Chat will be added eventually.

 

73, John

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 15 February 2013 23:47
To: BPQ32 Yahoo Group
Subject: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Gentlemen,

With all the traffic about the LinBPQ (in which I am also interested) what is the current version for Windows BPQ? 5.2.9.1? or other?

I presume the discussion about the web interface only applies to LinBPQ? Is this in the plan for Windows?

Just want to make sure I did not miss something.

73, Dave.

WA7RYV

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the BPQ32
group.

   File        : /BPQDOS.ZIP
   Uploaded by : enkitec <enkitec@...>
   Description : Remote DOS Commands for BPQ Node by G7TAJ

You can access this file at the URL:
http://groups.yahoo.com/group/BPQ32/files/BPQDOS.ZIP

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html
Regards,

enkitec <enkitec@...>

The system that I have used in the past is to use packet to obtain a copy of the file to be edited ( if I don't already have a copy ) and then use Windows Notebook or DOS EDIT.EXE to edit the file. - Then I simply replace the original file with the new version, reboot the remote system, and it uses the new file.

 

To work with a remote BPQ node, I would have a copy of FBB BBS there with password access, that was only there for the FBBDOS functions and the ability to reboot the remote computer. - The BBS function was not utilized or available to anyone besides myself. This allowed me to do any file function that was required on the node, and maintain the remote node from my hamshack without difficulty.

 

I find that the DOS versions of BPQ node is superior to the Windows version as far as remote access and maintanence is concerned. It also works well with PC-104 form industrial mini-computers, so I can have a remote node system with no moving or rotating parts that can handle heat, dust, etc.. They are pretty well bulletproof, have a built-in WatchDog function, and require very little power, a serious consideration if solar power is to be utilized at the node site.

 

Modern DOS machines are flabbergastingly fast. - And utterly reliable.

 

73 DE Charles, N5PVL

 

----- Original Message -----

From: Jim

To: BPQ32@yahoogroups.com

Sent: Sunday, February 17, 2013 9:01 PM

Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

Packet links are really too slow for screen editors, but a line based edit is feasable (anyone remember EDLIN?)

 

Uh huh and shell scripts.....

 

Showing my age......

 

Jim

----- Original Message -----

From: John Wiseman

To: BPQ32@yahoogroups.com

Sent: Sunday, February 17, 2013 12:21 PM

Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The Windows version has two SYSOP-mode commands, RECONFIG and REBOOT. The Linux Version has RESTART, which actually just shuts LinBPQ down, and expects the OS to restart it (for example by using INIT).

 

The Linux version, and the next Windows version have a way to connect to a shell/cmd session over the network. This allows editing of config files. Packet links are really too slow for screen editors, but a line based edit is feasable (anyone remember EDLIN?)

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 17 February 2013 00:35
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again. Was able to get right in. Intuitive and works well.

This type of access brings to mind a requirement I have been attempting to resolve. I have a need to remotely update the Telnet USER and AXIP MAP lists. The nodes are located in places where access is extremely difficult. I have been attempting to use HSMM-MESH and a Remote Access tool to edit the BPQ configuration file and then activate them. This works but if the path quality degrades then the Remote Access stalls.

I understand and use the Reconfig options from the various BPQ menus but is there a way to force a Reconfig remotely? A hidden command? other?

I will appreciate any feedback you can provide. Thanks again, I will put the web interface to use.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 7:44 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Ok, Dave.

 

There isn''t much documentation about it - just a mention in the release notes.

 

To enable it add an HTTPPORT=nnnn to the Telnet Server config (or add a telnet server if you don't already have one defined)

 

Then connect to 127.0.0.1:nnnn with a web browser. There are pages to display various node tables, and a terminal.

 

73, John

 

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 16 February 2013 14:10
To: BPQ32@yahoogroups.com
Subject: Re: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

John,

Thanks again for the prompt reply.

I have completely missed the Windows Web interface. Please point me in the right direction.

I sometimes have a problem with things hiding in plain sight...

I really appreciate all the work you do.

73, Dave.
WA7RYV

---

From: John Wiseman <john.wiseman@...>
To: BPQ32@yahoogroups.com
Sent: Saturday, February 16, 2013 4:47 AM
Subject: RE: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Dave,

 

The latest Windows version is 5.2.9.1. A new one should be out soon.

 

The Windows code has had a Web interface to the node and aprs features for a while now. The Web interface to the BBS and Chat will be added eventually.

 

73, John

---

From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of David Bird
Sent: 15 February 2013 23:47
To: BPQ32 Yahoo Group
Subject: [BPQ32] 02-15-13 - WINDOWS BPQ VERSION

 

Gentlemen,

With all the traffic about the LinBPQ (in which I am also interested) what is the current version for Windows BPQ? 5.2.9.1? or other?

I presume the discussion about the web interface only applies to LinBPQ? Is this in the plan for Windows?

Just want to make sure I did not miss something.

73, Dave.

WA7RYV

Hi John,

             Updated to version 6.0.0.80, running very well.

Regards ..... Peter