Are there just two of us running bpq32 and Winmor that are having this problem ? Sent problem to both John and to Rick KN6KB both with no response in either...
Hi there, yes would like to obtain install instructions for xp please? Want to give this ago. I have a optoscc card from pa0hzp with 2 dss 1200 modems that...
Jay. I will watch my system this afternoon and see if I see this happening.. I have been fighting issues where I lose the ability to hear on any of my 18...
I have heard it does under WIN7.. WIN8 seems to be a different animal.. In WIN7 Anything I added it would find drivers. Win8 does not seem to be that smart,,,...
Hi Jim yes BBQ 32 will work with Vista Windows 7 and Windows 8 however be aware that BBQ 32 will be installed in two different folder locations it must be done...
I do not see any winmor TAIL on my system. It sends the ID at the end and disconnects within a few seconds.. I also am not seeing any deterioration of my ports...
Jim I am running it in Win7 and Vista. I tested it on Win8 just to be sure the installer worked and it did and BPQ32 did run. The issue which confuses is the...
Yes it runs under Win7, but to modify the bpq32.cfg, you'll have to got to /users/your user name/AppData/Roaming/Bpq32. A bit trickier, but once it's done, it...
The driver works both in xp and in win2k. softdcd does not work with the HDLC cards. I have tested a couple years back with win98 and scc that worked ok witb...
So you are running the MS approved install format for Win7. Good. Just to repeat...to get to the configuration folder you just go to 'start\all...
Hi. I have racked my brains (Did not take long) trying to figure out why my BPQWEB stopped working.. I checked what I believe is correct in BPQ, my router,...
Jerry, No, there is no need to move it. With systems below Win 7 the data can be in the application data folder, but it can also be in Program Files. 73, John ...
Ok.. Thanks. 73 Jerry Something knows what where it is??? As connecting to it never happens any more.. I double checked my files and router.. will try again to...
... +1 more. Same symptom - bpq32 with winmor ver.1.4.4 hold PTT for ~15sec after QSO end or call attempt. Solved by back to Winmor ver. 1.4.1.0 73 & hny ...
Serge I also run WINMOR with BPQ but I only use Paclink to drive it, as well as force inbound connections to RMS Packet. I have not experienced the problem you...
Happy New Year to you to Jerry. I am all shut down. I cannot keep up with corrections and improvements. Looking at the HAL Card now. Keep you posted. 73...
Im sure it will run under Windows 7 at least. As a matter of fact, I do know someone who runs it under windows 7. I havnt tried it under the test version of 8...
John can I use a standard webserver to do same using the files in the bpq folder.. I know of no other way to fix this.. Thanks I am familiar with a few...
Hey Jerry. Does your isp port block 80, or all of sudden start blocking that port. Try a different port number. I use 8080 because my isp blocks port 80 from...
Hi Harold never has… but I did switch to a Static IP and I t may have to do with that… I will try… Thanks 73 Jerry From: BPQ32@yahoogroups.com...
Hi Harold.. That cleared an error I was having.. Will see how it does.. Thanks… 73 jerry From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf...
My BBS has numerous WP Update messages stored. They do seem to follow the standard lifetime rules, which is set at 5 days I think. At this time the oldest...
