I was able to get the 'example' pages to allow you to edit index.html, indexnoaprs.html, and NodeMenu.html - and have done so with success. However, I was...
I have no idea what happened to my post but it never made to here???? But I was looking for anyone that has had any success in getting APRSWW.exe to work on a...
Yes, I confirm that you cant change anything in those pages. 73, John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don P Sent:...
Charles, Can you try this and let me know how it goes? https://dl.dropbox.com/u/31910649/BPQHostModes.exe Thanks John _____ From: BPQ32@yahoogroups.com...
Just to explain a bit better, John W4JML and I are having a problem trying to get the Scheduled Task setup to re-run the APRSWW.EXE in (W7 Only), for users of ...
John The new .EXE solved the problem with the cmd: but when ever a station polls Or connects to the BPQ node, it automatically brings up the Winpack terminal? ...
Huh? _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Sent: Monday, November 05, 2012 10:02 AM To: BPQ32@yahoogroups.com ...
Sorry, Mike. I don't follow what you are saying. 73, John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Sent: 05 November...
John I found the problem, Winpack is on my test machine with BPQ32, bpq32.cfg on The test machine is a copy from the packet machine, on the test machine I Used...
Mike, Wouldn't that be an Allies or call assignment in cfg somewhere?...Joel Sent via BlackBerry from T-Mobile ... From: "Mike" <mmelnik1@...> Sender:...
Yes Joel, The application call bpq32.cfg is where I added the SSID N9PMO ... So one would have to use the BBS command or C N9PMO-3 in the switch Mike N9PMO ...
Can anyone help with rig control using a yaseu 857 and scs ptciipro. I am not using a comport. I have seen it working with airmail but I am using BPQ. Robby...
Sorry for the delay in response. At first glance, this seems to be working very well. At the main prompt in WinPack, I can type 'c 1 mon7nc' (a node that is...
Robby where you have the SCSPactor port setup you should have a CONFIG line. Below the CONFIG line I have RIGCONTROL COM4 9600 KENWOOD TS-570D 4 "your freq."/U...
I have a requirement where I want the BPQ node to only "Speak when spoken to." I wish to eliminate all node broadcasts. The node does not need to communicate...
Dave Reset the node settings ea. NODE= to normal settings, in the port or ports You don't want nodes to be sent out on set QUALITY=0 this will stop any Node...
Comment: BPQ32 Igate V 5.2.9.1 Last status: W9JUN BPQ32 Winmor 7.061 USB (dial) WLNK-1 Madison, IN Last beacon: W9JUN BPQ Packet Node in Madison, IN The above...
Not sure if someone has asked this but I am trying to have 2 different frequencies feed into the BBS. I am using a KPC 9612. I have setup the config with...
I have 3 frequencies feed my BBS. 1 VHF and 2 HF. In my case each HF frequency has it's own radio and Pactor modem thus, it's own port. From what you are...
Hi, You dont have to do anything special to allow both ports to connect to the BBS, A connect to the BBSCALL on either port will work. When forwarding out, the...
Mike, Thank you. Made the changes and all node broadcasts have disappeared with the exception of one. This is a significant improvement. Every two minutes the...
Dave Is you second BBS also BPQ32 node, if so in the port that is making the connection To your first BBS add in that port NOKEEPALIVES=1 How do you have the...
