I can connect to the BBS using outpost but it wants me to type in the BBS command so I can send messages. Is there a way to automate this? Sorry for the...
9228
Don P
donaldgporter
Nov 2, 2012 11:33 am
My winmor port is 2 and my telnet is 3... When I telnet in to my system and issue "att 2" I get an "error- port in use" This just started happening yesterday...
9229
Don P
donaldgporter
Nov 2, 2012 11:56 am
More info: when I telnet in and look at users, I see host 17 w9jun using port 2/0....I wonder if the httpport has anything to do with the issue?...
9230
David Bird
db.mediaint
Nov 2, 2012 2:05 pm
It sounds like you are entering through the node rather than directly to the BBS. Do you have a separate callsign alias for the BBS and are you able to connect...
9231
Dave
druliefw
Nov 2, 2012 2:58 pm
Click "SETUP" Click "BBS" Click "BBS PATH" Click "KA NODE" Click "Setup/Update Path" Then fill in the necessary information. 73 Dave WB2HVF...
9232
Jerry
n9lya
Nov 2, 2012 3:39 pm
Try a reboot and see if it does it from the get go. I have weird issues from time to time where my system says port in use and it clearly is not.?? From:...
9233
Don P
donaldgporter
Nov 2, 2012 3:45 pm
ok, will give it a shot this evening...
9234
k1jtc
Nov 2, 2012 4:21 pm
Ok so I have Outpost working on the same computer connecting through telnet. Comes up to bbs and sends and receives messages. My buddy who is trying to use...
9235
John Wiseman
gm8bpq
Nov 2, 2012 4:35 pm
Jeff You need to set up a callsign for the BBS. If the BBS is application 1 you can use the old BBSCALL config statement, but the current way to do it is with...
9236
Dave
druliefw
Nov 2, 2012 7:18 pm
Your BBS should have a different callsign-ssid from the node and have it's own alias. See the message John sent you. Your friend should be able to connect...
9237
dph200
Nov 2, 2012 9:32 pm
Hi John, thx for your Answer. I know that there are many wishes that I have listed and that it will take time to implement. Actually, I meant it more as an...
9238
John Wiseman
gm8bpq
Nov 2, 2012 10:06 pm
HI Joachim, The only packets sent from APRS-IS to RF are replies to APRS messages sent from stations on RF to IS, and the next position reporrt from stations...
9239
w5seg@...
w5seg...
Nov 3, 2012 7:36 pm
Can anyone help with rig control. I have a yaseu 857d with cables connecting direct to scs ptciipro to let it control frequency scanning process using the same...
9240
neocharles_kk4hok
neocharles_k...
Nov 3, 2012 11:08 pm
I am extremely new to using BPQ32 and had some assistance from a fellow ham in getting it configured. I am up and running, however, I am noticing one quirk...
9241
Don P
donaldgporter
Nov 4, 2012 12:24 am
Hello... How is the beacon text in bpqaprs edited? Comment: BPQ32 Igate V 5.2.9.1 Last status: W9JUN BPQ32 Winmor 7.061 USB (dial) WLNK-1 Madison, IN Last...
9242
n9acq
Nov 4, 2012 1:52 am
Charles Sound like WinPack is responding with something in response to the UA from BPQ.I thing your problem is with WinPack and not BPQ. 73 Bill N9ACQ...
9243
John Wiseman
gm8bpq
Nov 4, 2012 9:34 am
Charles, With the DED mode interface used by Winpack, the fiist connect is always to the node, So you need a second connect to get to the bbs, A typical script...
9244
w4jml
Nov 4, 2012 1:36 pm
Hello, Has anyone been able to set up successfully the APRSWW.exe to run like it should on win 7 321 bit? We have tried just about everything, one it will run...
9245
neocharles_kk4hok
neocharles_k...
Nov 4, 2012 6:44 pm
Okay - That makes sense (having to connect to switch first). Is there some way to when I type c ____ it can automatically connect to switch and then whatever...
9246
John Wiseman
gm8bpq
Nov 4, 2012 8:14 pm
Charles, I've just had another look at the code, and I did in fact try to add code to pass connect request through to the node, but it isn't working properly. ...
9247
neocharles_kk4hok
neocharles_k...
Nov 5, 2012 1:46 am
You're awesome. Thanks! I'm always looking for a way to take a shortcut. I'm loving everything I am seeing with this, and am looking to expand the county's...
9248
neocharles_kk4hok
neocharles_k...
Nov 5, 2012 2:17 am
I was able to get the 'example' pages to allow you to edit index.html, indexnoaprs.html, and NodeMenu.html - and have done so with success. However, I was...
9249
w4jml
Nov 5, 2012 2:38 am
I have no idea what happened to my post but it never made to here???? But I was looking for anyone that has had any success in getting APRSWW.exe to work on a...
9250
Don P
donaldgporter
Nov 5, 2012 12:17 pm
Good day!! I believe "Routes, Nodes, Ports, Links, Users, Stats" are built into the code......
9251
John Wiseman
gm8bpq
Nov 5, 2012 2:18 pm
Yes, I confirm that you cant change anything in those pages. 73, John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don P Sent:...
9252
John Wiseman
gm8bpq
Nov 5, 2012 2:20 pm
Charles, Can you try this and let me know how it goes? https://dl.dropbox.com/u/31910649/BPQHostModes.exe Thanks John _____ From: BPQ32@yahoogroups.com...
9253
Mike
n9pmo
Nov 5, 2012 2:44 pm
Just to explain a bit better, John W4JML and I are having a problem trying to get the Scheduled Task setup to re-run the APRSWW.EXE in (W7 Only), for users of ...
9254
Mike
n9pmo
Nov 5, 2012 3:02 pm
John The new .EXE solved the problem with the cmd: but when ever a station polls Or connects to the BPQ node, it automatically brings up the Winpack terminal? ...
9255
JOHN
w4jml
Nov 5, 2012 3:15 pm
Huh? _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Sent: Monday, November 05, 2012 10:02 AM To: BPQ32@yahoogroups.com ...
9256
John Wiseman
gm8bpq
Nov 5, 2012 3:21 pm
Sorry, Mike. I don't follow what you are saying. 73, John _____ From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Mike Sent: 05 November...
