Hey Bill.
What is your chat information?
I have the node setup.
Mine is LVCHAT:KB7RSI-3

Harold

--- In BPQ32@yahoogroups.com, "Bill Erhardt" <k7mt@...> wrote:
>
> Hi Harold KB7RSI  LVCHAT if I have that right.  Harold could you please add
> me back to you Map so I can again link to LVCHAT the western connection.
> You mentioned you might have accidently removed my Map
>
>
>
> MAP K7MT-6 K7MT.WR7HLN.ORG UDP 10093 B
>
>
>
> I am presently linked to Ken KD6PGI  HRCHAT who links to you. I will set it
> back to you when I see your Map to me.
>
>
>
> Thanks Harold
>
>
>
> Bill Erhardt K7MT
>
> http://www.k7mt.com <http://www.k7mt.com/>
>

Hi John and others
my english is not so good but I want to try to explain my problem.
I have installed BPQ32 5.2.91 on my PC. For some programs I want to use the
AGWtoBPQ.exe.
The programs are WPP (Windows Packet Program), AGWTracker, Paxon,  etc.  They
are currently working very well with the AGWPE.
Unfortunately the AGWtoBPQ crashes after some time when i use one of my Packet
programs. I tried it on different machines with different operating systems.
Desktop PC with Windows 2008 Server RC2 64bit, Notebook with Windows XP
Professional 32bit, Windows XP Professional 32bit on a virtual machine. The time
to the crash is different. Times only a few seconds / minutes and then it works
sometimes 30 minutes. If I myself connect to other Stations the crash comes
sooner than when I receive only.  AQWtoBPQ is configured on port 8001 with 6
streams and APPLMask 0x6 for Application 2 and 3.
I hope there is a solution to my problem, because I would like to use the BPQ32.
55/73 Joachim

Hi Bill,

Thx for your answer.
The problem also exist when I use no AGWPE with BPQ. It also happened when i use
BPQ directly with kiss TNC at may COM Ports. The AGWtoBPQ.exe crashed.
The Ports in the Packet Programs are variable. I changed the port in my Programs
to 8001. I also use this port in the AGWtoBPQ.

73 Joachim

--- In BPQ32@yahoogroups.com, "N9ACQ" <n9acq@...> wrote:
>
> Joachim
>
>                 When using AGW and AGWtoBPQ the problem is usually the port
> numbers used. This will require you to determine which programs allow you to
> select the port number and which are hard coded. In short the AGWtoBPQ
> clients can nit use the same port number as you use between BPQ and AGW.
>
> 73 Bill
>
> N9ACQ
>

Joachim,

Does agwtobpq crash if you run one of the programs at a time?

Do you get any error messages from agwtobpq?

73, John G8BPQ

joachimnienstedt <joachimnienstedt@...> wrote:

>Hi John and others
>my english is not so good but I want to try to explain my problem.
>I have installed BPQ32 5.2.91 on my PC. For some programs I want to use the
AGWtoBPQ.exe.
>The programs are WPP (Windows Packet Program), AGWTracker, Paxon,  etc.  They
are currently working very well with the AGWPE.
>Unfortunately the AGWtoBPQ crashes after some time when i use one of my Packet
programs. I tried it on different machines with different operating systems.
Desktop PC with Windows 2008 Server RC2 64bit, Notebook with Windows XP
Professional 32bit, Windows XP Professional 32bit on a virtual machine. The time
to the crash is different. Times only a few seconds / minutes and then it works
sometimes 30 minutes. If I myself connect to other Stations the crash comes
sooner than when I receive only.  AQWtoBPQ is configured on port 8001 with 6
streams and APPLMask 0x6 for Application 2 and 3.
>I hope there is a solution to my problem, because I would like to use the
BPQ32.
>55/73 Joachim
>
>

does anyone on here run bpq with the kenwood tm-d710 and if so how do you get
the radio to go into kiss mode with this set up?

John
W4JML

Hi John
               The way I do it is:
First I press the TNC button on the Radio twice.
This puts the internal TNC into packet mode (not APRS mode)

Second using any terminal program I send the following two commands
to the Kenwood D710

CMD:  KISS ON
CMD: RESTART

Third: Exit the terminal program and start up BBQ.

On 7 Oct 2012 at 15:19, w4jml wrote:

> does anyone on here run bpq with the kenwood tm-d710 and if so how
> do you get the radio to go into kiss mode with this set up?
>
> John
> W4JML
>
>



Let us hope we never witness the "Silence Of The Hams"
73 DE John KB2SCS
            Packet:        KB2SCS@WA2PNU,#NLI.NY.USA.NOAM
            E-Mail:         kb2scs@...
            Web Page:  http://www.qsl.net/kb2scs

THANKS TO ALL THAT RESPONDED IT IS NOW WORKING, THANK GOD JUST ONE MORE THING
OFF OF MY MIND.

JOHN
W4JML

Just a note on this one.. Over the last couple of weeks or so Ive been battling
with AGWtoBPQ crashing. This seems to be from around the time I upgraded to the
latest version of BPQ v5.2.9.1. I think the DLL was replaced along with some
other minor changes. I remember the installer seemed to remove and change file
locations of many things as it installed.
Currently Ive gone back to AGW as a replacment to see if the issue lies
elsewhere in the system and so far no crashes.
I run Windows XP with AGWtoBPQ on the standard Port 8000. I am just using
Ui-View32 and JavAPRSsrvr with APRS on a single VHF Port currently with a TNC-X
.
I might have to go back to the previous version of BPQ and see if that is
stable. This could be the next move.
As far as the crash goes I wonder if there are any useful bits of info I can
capture. When it crashes the Tray Icon ceases to respond and I have to use the
Task Manager to stop BPQ32 and AGWtoBPQ exe's . After that I can run them again
ok and the COM port works fine.
When it crashes the WinSock 8000 port still appears to be there as the programes
do not complain about the lack of WinSock however it does not pass any frames to
the TNC in either direction.

Any ideas anyone ?   Regards Tony VK5AH


--- In BPQ32@yahoogroups.com, John Wiseman <john.wiseman@...> wrote:
>
> Joachim,
>
> Does agwtobpq crash if you run one of the programs at a time?
>
> Do you get any error messages from agwtobpq?
>
> 73, John G8BPQ
>
> joachimnienstedt <joachimnienstedt@...> wrote:
>
> >Hi John and others
> >my english is not so good but I want to try to explain my problem.
> >I have installed BPQ32 5.2.91 on my PC. For some programs I want to use the
AGWtoBPQ.exe.
> >The programs are WPP (Windows Packet Program), AGWTracker, Paxon,  etc.  They
are currently working very well with the AGWPE.
> >Unfortunately the AGWtoBPQ crashes after some time when i use one of my
Packet programs. I tried it on different machines with different operating
systems. Desktop PC with Windows 2008 Server RC2 64bit, Notebook with Windows XP
Professional 32bit, Windows XP Professional 32bit on a virtual machine. The time
to the crash is different. Times only a few seconds / minutes and then it works
sometimes 30 minutes. If I myself connect to other Stations the crash comes
sooner than when I receive only.  AQWtoBPQ is configured on port 8001 with 6
streams and APPLMask 0x6 for Application 2 and 3.
> >I hope there is a solution to my problem, because I would like to use the
BPQ32.
> >55/73 Joachim
> >
> >
>

JUST TO LET EVERYONE KNOW THAT I AM NOW ON THE AIR WITH BPQ AND FBB, WITH THE
HELP OF N9PMO I AM NOW ON 145.730 IN LYNCHBURG, VA.

73'S
JOHN
W4JML.#SWVA.VA.USA.NOAM

I am setting up for 40 meter packet and I will be using the uz7ho sound modem.
If you have a config you are willing to share please let me know. I have been
away from bpq for several months while moving and have forgotten everthing I
learned...LOL

ps...on WIN7 where does the config file reside?

Thanks

Don

Hi John,

yes, agw to bpq crashes even if only one program is running.
There is no error message. On Windows Server 2008 comes a requester to close the
program. On Windows XP, the window closes without comment.
I now go back to AGWPE. But I hope I can replace the AGWPE sometime by
agwtobpq.exe.

73, Joachim

--- In BPQ32@yahoogroups.com, John Wiseman <john.wiseman@...> wrote:
>
> Joachim,
>
> Does agwtobpq crash if you run one of the programs at a time?
>
> Do you get any error messages from agwtobpq?
>
> 73, John G8BPQ
>
> joachimnienstedt <joachimnienstedt@...> wrote:
>
> >Hi John and others
> >my english is not so good but I want to try to explain my problem.
> >I have installed BPQ32 5.2.91 on my PC. For some programs I want to use the
AGWtoBPQ.exe.
> >The programs are WPP (Windows Packet Program), AGWTracker, Paxon,  etc.  They
are currently working very well with the AGWPE.
> >Unfortunately the AGWtoBPQ crashes after some time when i use one of my
Packet programs. I tried it on different machines with different operating
systems. Desktop PC with Windows 2008 Server RC2 64bit, Notebook with Windows XP
Professional 32bit, Windows XP Professional 32bit on a virtual machine. The time
to the crash is different. Times only a few seconds / minutes and then it works
sometimes 30 minutes. If I myself connect to other Stations the crash comes
sooner than when I receive only.  AQWtoBPQ is configured on port 8001 with 6
streams and APPLMask 0x6 for Application 2 and 3.
> >I hope there is a solution to my problem, because I would like to use the
BPQ32.
> >55/73 Joachim
> >
> >
>

Joachim

Are you running AGWPE as an interface or sound card TNC and trying to
run AGWtoBPQ.EXE also?

Mike N9PMO
www.n9pmo.com
-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
joachimnienstedt
Sent: Thursday, October 11, 2012 10:42 AM
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Re: AGWtoBPQ Crash

 
Hi John,

yes, agw to bpq crashes even if only one program is running.
There is no error message. On Windows Server 2008 comes a requester to
close the program. On Windows XP, the window closes without comment.
I now go back to AGWPE. But I hope I can replace the AGWPE sometime by
agwtobpq.exe.

73, Joachim

--- In BPQ32@yahoogroups.com, John Wiseman <john.wiseman@...> wrote:
>
> Joachim,
>
> Does agwtobpq crash if you run one of the programs at a time?
>
> Do you get any error messages from agwtobpq?
>
> 73, John G8BPQ
>
> joachimnienstedt <joachimnienstedt@...> wrote:
>
> >Hi John and others
> >my english is not so good but I want to try to explain my problem.
> >I have installed BPQ32 5.2.91 on my PC. For some programs I want to
use the AGWtoBPQ.exe.
> >The programs are WPP (Windows Packet Program), AGWTracker, Paxon,
etc. They are currently working very well with the AGWPE.
> >Unfortunately the AGWtoBPQ crashes after some time when i use one of
my Packet programs. I tried it on different machines with different
operating systems. Desktop PC with Windows 2008 Server RC2 64bit,
Notebook with Windows XP Professional 32bit, Windows XP Professional
32bit on a virtual machine. The time to the crash is different. Times
only a few seconds / minutes and then it works sometimes 30 minutes. If
I myself connect to other Stations the crash comes sooner than when I
receive only. AQWtoBPQ is configured on port 8001 with 6 streams and
APPLMask 0x6 for Application 2 and 3.
> >I hope there is a solution to my problem, because I would like to use
the BPQ32.
> >55/73 Joachim
> >
> >
>

I nearly have my config finished thanks to N9LYA...

Which command do I edit to setup bpqaprs as IS only, no RF at this time

--- In BPQ32@yahoogroups.com, "Don P" <w9jun@...> wrote:
>
> I am setting up for 40 meter packet and I will be using the uz7ho sound modem.
If you have a config you are willing to share please let me know. I have been
away from bpq for several months while moving and have forgotten everthing I
learned...LOL
>
> ps...on WIN7 where does the config file reside?
>
> Thanks
>
> Don
>

Thank you, John...

--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>
> Don,
>
> Remove any APRSPath and DigiMap statements. Edit ISHost, ISPort, ISPasscode
> and ISFilter as needed.
>
> 73,
> John G8BPQ
>
>
>   _____
>
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Don
> P
> Sent: 12 October 2012 13:54
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] BPQAPRS IS Only
>
>
>
>
> I nearly have my config finished thanks to N9LYA...
>
> Which command do I edit to setup bpqaprs as IS only, no RF at this time
>
> --- In BPQ32@yahoogroups.com <mailto:BPQ32%40yahoogroups.com> , "Don P"
> <w9jun@> wrote:
> >
> > I am setting up for 40 meter packet and I will be using the uz7ho sound
> modem. If you have a config you are willing to share please let me know. I
> have been away from bpq for several months while moving and have forgotten
> everthing I learned...LOL
> >
> > ps...on WIN7 where does the config file reside?
> >
> > Thanks
> >
> > Don
> >
>

Howdy Gang,

I forgot to mention that I shut everything down when I left on this
Wild Land Fire assignment in Baudette, Minnesota.  Not sure how long I
am going to be here so I shut down the house etc.

I will have it back up when I got home.

Everyone have a good one.

Cheers from the North Minnie Fire near Baudette, Mn.

http://www.k7mt.com



----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.