Ok, Peter,

 

Unfortunately I don’t have a slow machine here to try it on.

 

Even with 10000 stations it only uses a few percent on my Intel Atom 1.6 Ghz based laptop, but I realise that a direct comparison of clock speed between old and new processors can be misleading.

 

Do you see the problem with a very low number of stations? – I’m interested to know if it is drawing the map that takes so much, or adding the station icons.

 

I could probably add an option to refresh less often for slow machines.

 

73,

John

Hi Joshua,

Add my AXIP link, if still possible.

MAP OH2BIP-10 OH2BIP.no-ip.org UDP 10093 B

Thanks in advance
Jussi OH2BIP



--- In BPQ32@yahoogroups.com, joshuafuller@... wrote:
>
> Hi all,
> KJ4EWA here in Parker,CO. Just a few miles south east of Denver,CO.
> I'm interested in setting up AXIP links with anyone that would be
> interested for BBS and CHAT usage. Especially if your passing NTS
> traffic.
> Regular chat and BBS links are welcome. I'm interested in getting
> bulletins as I'm currently  unable to get them.
> Here is my line to add to your configs if you want to connect to me.
> MAP KJ4EWA-7 QTH.KJ4EWA.AMPR.ORG UDP 10093 B
> Thanks and would love to hear from anyone !
> 73sKJ4EWAJosh
>

 

Peter,

 

I’ll have a look and see how difficult this would be, although I’m no really sure what problem it is trying to solve. Doesn’t the Linux Kernel have netrom support?

 

73,

John

MAP n9lya-7 w9bbs.no-ip.org UDP 10093 B

Thanks Jerry

--- In BPQ32@yahoogroups.com, "jussimikkola" <jussimathias@...> wrote:
>
>
>
>
> Hi Joshua,
>
> Add my AXIP link, if still possible.
>
> MAP OH2BIP-10 OH2BIP.no-ip.org UDP 10093 B
>
> Thanks in advance
> Jussi OH2BIP
>
>
>
> --- In BPQ32@yahoogroups.com, joshuafuller@ wrote:
> >
> > Hi all,
> > KJ4EWA here in Parker,CO. Just a few miles south east of Denver,CO.
> > I'm interested in setting up AXIP links with anyone that would be
> > interested for BBS and CHAT usage. Especially if your passing NTS
> > traffic.
> > Regular chat and BBS links are welcome. I'm interested in getting
> > bulletins as I'm currently  unable to get them.
> > Here is my line to add to your configs if you want to connect to me.
> > MAP KJ4EWA-7 QTH.KJ4EWA.AMPR.ORG UDP 10093 B
> > Thanks and would love to hear from anyone !
> > 73sKJ4EWAJosh
> >
>

On a new install of BPQ (latest version) MailChat crashes every time I try to
start it. The following error appears in the debug log:

MAILCHAT *** Program Error c0000005 at 4200ba6d in Initialise EAX 0 EBX 1 ECX
4549e8 EDX 0 ESI 5210f0 EDI 5

MailChat started normally following installation and prompted me to enter the
configuration information. When I re-started after configuring the BBS this
problem began.

I've tried rebooting the machine but have not attempted an uninstall/reinstall -
hopefully it won't come to that.

Any ideas?

Thanks and regards,
Andy
N9VT
Fredericksburg, VA

Andy

If you had a previous version of BPQMailChat and the new installation
was asking for you to configure the first 4
Tabs, the root directory has changed, earlier versions by default was
C:\Program Files\BPQ32 new versions should have stayed the same path but
sounds like it didn't, check your Path in the Configuration, Main
configuration, BBS Params, if XP or W2K

Start, Run Regedit, HKEY_LOCAL_MACHINE\SOFTWARE\G8BPQ\BPQ32

"BPQ Directory"="C:\\Program Files\\BPQ32"
"BPQ Program Directory"="C:\\Program Files\\BPQ32"

I ether case the BBS Params must be the same as registry, the newer
releases when installed have two folder locations to accommodate Vista
and W7, you can find the Configuration file location by go to Start, All
Programs, BPQ32, select View Configuration Folder.

My guess is the Base Directory is not the same in BBS Params and
Registry, correct the Base directory, Save, Restart MailChat.

Let us know if this solved the problem.

Mike-N9PMO
www.n9pmo.com

-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
n9vt_andy
Sent: Friday, March 09, 2012 7:53 AM
To: BPQ32@yahoogroups.com
Subject: [BPQ32] MailChat crashes on startup

On a new install of BPQ (latest version) MailChat crashes every time I
try to start it. The following error appears in the debug log:

MAILCHAT *** Program Error c0000005 at 4200ba6d in Initialise EAX 0 EBX
1 ECX 4549e8 EDX 0 ESI 5210f0 EDI 5

MailChat started normally following installation and prompted me to
enter the configuration information. When I re-started after configuring
the BBS this problem began.

I've tried rebooting the machine but have not attempted an
uninstall/reinstall - hopefully it won't come to that.

Any ideas?

Thanks and regards,
Andy
N9VT
Fredericksburg, VA



------------------------------------

Yahoo! Groups Links





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4858 - Release Date:
03/08/12

Mike,

Thanks for responding. This was a new installation on a machine that had never
hosted BPQ before. I will cross-walk the registry and configuration directory
paths to ensure they're consistent, though, and let you know if that was the
problem. It may be time to just wipe the installation and try again from
scratch.

Another question - I noticed several files in my BPQMailChat folder names
"Traffic_######.txt" where the number was a date stamp. Opening the file I found
an excellent traffic summary for a 7-day period broken out by station and
including message and byte counts. Is this a new feature? If so, is it
user-customizable? I'd like to run this routing for various time periods to
better understand how my and other BBSes are utilized.

R/
Andy
N9VT

--- In BPQ32@yahoogroups.com, "Mike Melnik" <mmelnik1@...> wrote:
>
> Andy
>
> If you had a previous version of BPQMailChat and the new installation
> was asking for you to configure the first 4
> Tabs, the root directory has changed, earlier versions by default was
> C:\Program Files\BPQ32 new versions should have stayed the same path but
> sounds like it didn't, check your Path in the Configuration, Main
> configuration, BBS Params, if XP or W2K
>
> Start, Run Regedit, HKEY_LOCAL_MACHINE\SOFTWARE\G8BPQ\BPQ32
>
> "BPQ Directory"="C:\\Program Files\\BPQ32"
> "BPQ Program Directory"="C:\\Program Files\\BPQ32"
>
> I ether case the BBS Params must be the same as registry, the newer
> releases when installed have two folder locations to accommodate Vista
> and W7, you can find the Configuration file location by go to Start, All
> Programs, BPQ32, select View Configuration Folder.
>
> My guess is the Base Directory is not the same in BBS Params and
> Registry, correct the Base directory, Save, Restart MailChat.
>
> Let us know if this solved the problem.
>
> Mike-N9PMO
> www.n9pmo.com
>
> -----Original Message-----
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
> n9vt_andy
> Sent: Friday, March 09, 2012 7:53 AM
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] MailChat crashes on startup
>
> On a new install of BPQ (latest version) MailChat crashes every time I
> try to start it. The following error appears in the debug log:
>
> MAILCHAT *** Program Error c0000005 at 4200ba6d in Initialise EAX 0 EBX
> 1 ECX 4549e8 EDX 0 ESI 5210f0 EDI 5
>
> MailChat started normally following installation and prompted me to
> enter the configuration information. When I re-started after configuring
> the BBS this problem began.
>
> I've tried rebooting the machine but have not attempted an
> uninstall/reinstall - hopefully it won't come to that.
>
> Any ideas?
>
> Thanks and regards,
> Andy
> N9VT
> Fredericksburg, VA
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4858 - Release Date:
> 03/08/12
>

Andy

Yes, the Traffic.txt is new it does go back a few versions, I think
started with BPQ32 Version 5.x.x.x

I do not think the Traffic.txt logs are user user-customizable, I am
sure John will answer this question, there is a LastTrafficTime entry in
the Housekeeping registry value but I am not sure one can change the
timing of when the log may be created.

All of your Users BBS forwarding is stored in the registry
MailChat\+ BBS Forwarding, and user info is stored in the Folder
BPQMailChat\BPQBBSUsers.dat file, you could copy the
Registry entry for MailChat\Forwarding to your new BPQMailChat
Only copy that value since the files locations are different in a fresh
install, and copy the BPQBBSUsers.dat

This will save a lot of work if you have many Users/Partners.

I strongly suggest you enable Save Registry setting in the BPQMailChat
Housekeeping this will create registry backups.

When installing BPQ32/MailChat there are 2 directory path options, by
default the first is Programs Files\BPQ32
The next is Program Directory this is by default,
C:\Document and Settings\Computer User\Application Data

If you do, a new install go slow and change the Program direct path to
C:\Program Files\BPQ32 then all will be in one folder.

The Uninstall may not remove all files in the Application Data folder,
you may need to delete manually.

Caution only for XP and previous versions!!

Mike-N9PMO
www.n9pmo.com

-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
n9vt_andy
Sent: Friday, March 09, 2012 9:25 AM
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Re: MailChat crashes on startup

Mike,

Thanks for responding. This was a new installation on a machine that had
never hosted BPQ before. I will cross-walk the registry and
configuration directory paths to ensure they're consistent, though, and
let you know if that was the problem. It may be time to just wipe the
installation and try again from scratch.

Another question - I noticed several files in my BPQMailChat folder
names "Traffic_######.txt" where the number was a date stamp. Opening
the file I found an excellent traffic summary for a 7-day period broken
out by station and including message and byte counts. Is this a new
feature? If so, is it user-customizable? I'd like to run this routing
for various time periods to better understand how my and other BBSes are
utilized.

R/
Andy
N9VT

--- In BPQ32@yahoogroups.com, "Mike Melnik" <mmelnik1@...> wrote:
>
> Andy
>
> If you had a previous version of BPQMailChat and the new installation
> was asking for you to configure the first 4
> Tabs, the root directory has changed, earlier versions by default was
> C:\Program Files\BPQ32 new versions should have stayed the same path
but
> sounds like it didn't, check your Path in the Configuration, Main
> configuration, BBS Params, if XP or W2K
>
> Start, Run Regedit, HKEY_LOCAL_MACHINE\SOFTWARE\G8BPQ\BPQ32
>
> "BPQ Directory"="C:\\Program Files\\BPQ32"
> "BPQ Program Directory"="C:\\Program Files\\BPQ32"
>
> I ether case the BBS Params must be the same as registry, the newer
> releases when installed have two folder locations to accommodate Vista
> and W7, you can find the Configuration file location by go to Start,
All
> Programs, BPQ32, select View Configuration Folder.
>
> My guess is the Base Directory is not the same in BBS Params and
> Registry, correct the Base directory, Save, Restart MailChat.
>
> Let us know if this solved the problem.
>
> Mike-N9PMO
> www.n9pmo.com
>
> -----Original Message-----
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf
Of
> n9vt_andy
> Sent: Friday, March 09, 2012 7:53 AM
> To: BPQ32@yahoogroups.com
> Subject: [BPQ32] MailChat crashes on startup
>
> On a new install of BPQ (latest version) MailChat crashes every time I
> try to start it. The following error appears in the debug log:
>
> MAILCHAT *** Program Error c0000005 at 4200ba6d in Initialise EAX 0
EBX
> 1 ECX 4549e8 EDX 0 ESI 5210f0 EDI 5
>
> MailChat started normally following installation and prompted me to
> enter the configuration information. When I re-started after
configuring
> the BBS this problem began.
>
> I've tried rebooting the machine but have not attempted an
> uninstall/reinstall - hopefully it won't come to that.
>
> Any ideas?
>
> Thanks and regards,
> Andy
> N9VT
> Fredericksburg, VA
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4858 - Release Date:
> 03/08/12
>




------------------------------------

Yahoo! Groups Links





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4860 - Release Date:
03/09/12

Mike,

Roger - I've successfully moved the MailChat configuration files on several
occasions and always use the Registry Save feature. Fortunately I haven't had
any problems with upgrading and dealing with the directory paths - I usually put
BPQ in a custom folder structure away from Program Files (C:\HAM\BPQ32\... is
the usual choice).

I wasn't able to find the "LastTrafficTime" registry entry, only
"LastHousekeepingTime".

Andy
N9VT

--- In BPQ32@yahoogroups.com, "Mike Melnik" <mmelnik1@...> wrote:
>
> Andy
>
> Yes, the Traffic.txt is new it does go back a few versions, I think
> started with BPQ32 Version 5.x.x.x
>
> I do not think the Traffic.txt logs are user user-customizable, I am
> sure John will answer this question, there is a LastTrafficTime entry in
> the Housekeeping registry value but I am not sure one can change the
> timing of when the log may be created.
>
> All of your Users BBS forwarding is stored in the registry
> MailChat\+ BBS Forwarding, and user info is stored in the Folder
> BPQMailChat\BPQBBSUsers.dat file, you could copy the
> Registry entry for MailChat\Forwarding to your new BPQMailChat
> Only copy that value since the files locations are different in a fresh
> install, and copy the BPQBBSUsers.dat
>
> This will save a lot of work if you have many Users/Partners.
>
> I strongly suggest you enable Save Registry setting in the BPQMailChat
> Housekeeping this will create registry backups.
>
> When installing BPQ32/MailChat there are 2 directory path options, by
> default the first is Programs Files\BPQ32
> The next is Program Directory this is by default,
> C:\Document and Settings\Computer User\Application Data
>
> If you do, a new install go slow and change the Program direct path to
> C:\Program Files\BPQ32 then all will be in one folder.
>
> The Uninstall may not remove all files in the Application Data folder,
> you may need to delete manually.
>
> Caution only for XP and previous versions!!
>
> Mike-N9PMO
> www.n9pmo.com
>

Is this the same BPQMailChat you have the Traffic.txt in?

[HKEY_LOCAL_MACHINE\SOFTWARE\G8BPQ\BPQ32\BPQMailChat\Housekeeping]

"LastHouseKeepingTime"=dword:4f5a3172
"LastTrafficTime"=dword:4f5384ea

If this is you the machine you just installed BPQMailChat the registry
value may not show up until your run housekeeping once again I do not
know that this value can be changed.

C:\HAM\BPQ32\... this is fine

Mike-N9PMO
www.n9pmo.com

-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
n9vt_andy
Sent: Friday, March 09, 2012 11:57 AM
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Re: MailChat crashes on startup

Mike,

Roger - I've successfully moved the MailChat configuration files on
several occasions and always use the Registry Save feature. Fortunately
I haven't had any problems with upgrading and dealing with the directory
paths - I usually put BPQ in a custom folder structure away from Program
Files (C:\HAM\BPQ32\... is the usual choice).

I wasn't able to find the "LastTrafficTime" registry entry, only
"LastHousekeepingTime".

Andy
N9VT

--- In BPQ32@yahoogroups.com, "Mike Melnik" <mmelnik1@...> wrote:
>
> Andy
>
> Yes, the Traffic.txt is new it does go back a few versions, I think
> started with BPQ32 Version 5.x.x.x
>
> I do not think the Traffic.txt logs are user user-customizable, I am
> sure John will answer this question, there is a LastTrafficTime entry
in
> the Housekeeping registry value but I am not sure one can change the
> timing of when the log may be created.
>
> All of your Users BBS forwarding is stored in the registry
> MailChat\+ BBS Forwarding, and user info is stored in the Folder
> BPQMailChat\BPQBBSUsers.dat file, you could copy the
> Registry entry for MailChat\Forwarding to your new BPQMailChat
> Only copy that value since the files locations are different in a
fresh
> install, and copy the BPQBBSUsers.dat
>
> This will save a lot of work if you have many Users/Partners.
>
> I strongly suggest you enable Save Registry setting in the BPQMailChat
> Housekeeping this will create registry backups.
>
> When installing BPQ32/MailChat there are 2 directory path options, by
> default the first is Programs Files\BPQ32
> The next is Program Directory this is by default,
> C:\Document and Settings\Computer User\Application Data
>
> If you do, a new install go slow and change the Program direct path to
> C:\Program Files\BPQ32 then all will be in one folder.
>
> The Uninstall may not remove all files in the Application Data folder,
> you may need to delete manually.
>
> Caution only for XP and previous versions!!
>
> Mike-N9PMO
> www.n9pmo.com
>



------------------------------------

Yahoo! Groups Links





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus Database: 2114/4860 - Release Date:
03/09/12

John,

Thank you for creating the traffic report - it provides a great summary of BBS
activity.

Would it be possible to make the reporting period customizable? I can think of
several situations where daily and/or monthly reports would be useful (NTS
activity reports, emergency communication event reports, etc.)

73,
Andy
N9VT

--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>
> Mike/Andy,
>
>
>
> You shouldn't change "Last Traffic Time". It is used to prevent the traffic
> report being generated twice on the same day.
>
>
>
> At the moment the report is generated just after midnight each Sunday, and
> is not configurable.
>
>
>
> 73,
>
> John

Dave

The Traffic_Date.txt will be located in the BPQ32\BPQMailChat folder

Mike-N9PMO
www.n9pmo.com

-----Original Message-----
From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of D R Mynatt
Sent: Friday, March 09, 2012 6:02 PM
To: BPQ32@yahoogroups.com
Subject: RE: [BPQ32] Re: Traffic Report






Okay.... I've been out of the loop for a bit.  Where's the traffic report please.

 

Dave

 

 




From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of John Wiseman
Sent: Friday, March 09, 2012 12:56 PM
To: BPQ32@yahoogroups.com
Subject: RE: [BPQ32] Re: Traffic Report

Andy,

I’ll see what can be done. It would be reasonably easy to run at a different interval, but producing both daily and monthly reports would need a change to the way the data is stored.

John





From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of n9vt_andy
Sent: 09 March 2012 19:12
To: BPQ32@yahoogroups.com
Subject: [BPQ32] Re: Traffic Report

 

John,

Thank you for creating the traffic report - it provides a great summary of BBS activity.

Would it be possible to make the reporting period customizable? I can think of several situations where daily and/or monthly reports would be useful (NTS activity reports, emergency communication event reports, etc.)

73,
Andy
N9VT

--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>
> Mike/Andy,
>
>
>
> You shouldn't change "Last Traffic Time". It is used to prevent the traffic
> report being generated twice on the same day.
>
>
>
> At the moment the report is generated just after midnight each Sunday, and
> is not configurable.
>
>
>
> 73,
>
> John

 

I am shutting down till I have time to deal with my station…

 

Again running along fine for weeks.. Absolutely no changes made. Impossible I been working 16/7 Runs great..

 

And then starts acting up… Minor pieces lock up… (SCS Tracker to start with… Then Pactor and now WINMO locking up.. Almost instantly after a restart… I will leave VNC open but BPQ in its entirety will be off, if anyone I have granted access too wishes to dabble.. .  Dwight this does unfortunately also mean my weather station data will not be going out on VHF,,,

 

I am presently in our shutdown at work.. No time to give to Packet right now..

 

If I can muster (Negotiate a day off…) I will try then.. Not sure if it will be sooner or later…

 

 

May have to beg to be allowed to take a vacation day.. Spend it on this…

 

And try to get it going.. Not sure I can.. All vacations are normally suspended during shutdown..

 

Will get back to everyone.. once I know when I might be able to beg a day off…

 

Lol 

 

73 jerry

 

 

 

 

 

Last update I did I was told via message in the BPQ console, that the Dummy Map
line was no longer necessary and was being ignored. So, i removed it.

Well, ever since then I am no longer shown on the chat map. Coincidence or what?

I do not have any chat links. I was thinking that without links it does not
report or something. Clicking the send data to chat map does nothing.

Any clues?


Mark

Well after more searching I did find this...


>N5MDT     [BPQ-1.4.49.1-BFIHJM$]
>N5MDT     Chat Node is disabled
>N5MDT     de N5MDT>


This comes from starting up a Chat Console from Mail Chat.


I didn't know you could disable chat. I just assumed that if Mail/Chat was
running then chat was running.


Where do I look John?


Mark



--- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>
> Actually not correct. If the chat node is enabled, it will report even if it
> has no links. There are quite a few standalone chat nodes on the map.
>
>
>
> But in Mark's case, I've looked on node N5MDT-13 and it doesn't seem to have
> chat running - is that the right node?
>
>
>
> 73,
>
> John
>
>
>
>
>
>   _____
>
> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
> wu3v@...
> Sent: 10 March 2012 15:06
> To: BPQ32@yahoogroups.com
> Subject: Re: [BPQ32] Chat Map
>
>
>
>
>
>
>
> That is correct if there are no chat links it has nothing to report.
>
> From: n5mdt <mtaylor@...>
> To: BPQ32@yahoogroups.com
> Sent: Saturday, March 10, 2012 8:41 AM
> Subject: [BPQ32] Chat Map
>
>
>
>
>
> Last update I did I was told via message in the BPQ console, that the Dummy
> Map line was no longer necessary and was being ignored. So, i removed it.
>
> Well, ever since then I am no longer shown on the chat map. Coincidence or
> what?
>
> I do not have any chat links. I was thinking that without links it does not
> report or something. Clicking the send data to chat map does nothing.
>
> Any clues?
>
> Mark
>

Restarting BPQ did not affect it, but completely shutting down BPQ and
restarting it now looks like chat is no longer disabled. Don't know what
could have done that.


I guess I'll show back up on the map soon.


Mark



> Well after more searching I did find this...
>
>
>>N5MDT     [BPQ-1.4.49.1-BFIHJM$]
>>N5MDT     Chat Node is disabled
>>N5MDT     de N5MDT>
>
>
> This comes from starting up a Chat Console from Mail Chat.
>
>
> I didn't know you could disable chat. I just assumed that if Mail/Chat was
> running then chat was running.
>
>
> Where do I look John?
>
>
> Mark
>
>
>
> --- In BPQ32@yahoogroups.com, "John Wiseman" <john.wiseman@...> wrote:
>>
>> Actually not correct. If the chat node is enabled, it will report even
>> if it
>> has no links. There are quite a few standalone chat nodes on the map.
>>
>>
>>
>> But in Mark's case, I've looked on node N5MDT-13 and it doesn't seem to
>> have
>> chat running - is that the right node?
>>
>>
>>
>> 73,
>>
>> John
>>
>>
>>
>>
>>
>>   _____
>>
>> From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of
>> wu3v@...
>> Sent: 10 March 2012 15:06
>> To: BPQ32@yahoogroups.com
>> Subject: Re: [BPQ32] Chat Map
>>
>>
>>
>>
>>
>>
>>
>> That is correct if there are no chat links it has nothing to report.
>>
>> From: n5mdt <mtaylor@...>
>> To: BPQ32@yahoogroups.com
>> Sent: Saturday, March 10, 2012 8:41 AM
>> Subject: [BPQ32] Chat Map
>>
>>
>>
>>
>>
>> Last update I did I was told via message in the BPQ console, that the
>> Dummy
>> Map line was no longer necessary and was being ignored. So, i removed
>> it.
>>
>> Well, ever since then I am no longer shown on the chat map. Coincidence
>> or
>> what?
>>
>> I do not have any chat links. I was thinking that without links it does
>> not
>> report or something. Clicking the send data to chat map does nothing.
>>
>> Any clues?
>>
>> Mark
>>
>
>
>

Is it possible to configure a seccond axudp port that broadcasts
anything send to it?
I currently have agwpe in use for that connected to digi_ned, the idea
is to transmit anything recieved on 144.800 out on the axudp port and
anything with the digicall in it from axudp back out on 144.800,
obviously I don't want to send all aprs trafic to all my link partners,
just those that have a map entry for the seccond aprs udp port.

73 Andre PE1RDW