Howard, You probably should remove the PORTCALL line from bpqcfg.txt You also need a rigcontrol.cfg containing: COM8 19200 PTTONLY RADIO XXXX 3 73, John ... ...
2863
Art Bertheaume
abertheaume
Mar 5, 2010 4:11 pm
Howard The "port" in BPQtoWinmor refers to the Winmor port you have set for winmor in BPQCFG.txt.  You will need to define the serial port(com port) in...
2862
Howard Z
howard_z
Mar 5, 2010 4:04 pm
Here is a portion of my bpqcfg.txt file the Winmore is the third port I have defined here: PORT PORTNUM=3 ID=WINMOR Port 1 TYPE=EXTERNAL PROTOCOL=WINMOR ...
2861
Rick Muething
kn6kb
Mar 5, 2010 3:43 pm
Howard, The host can also set the audio capture/playback and read the available sound cards from the TNC. The host program takes care of the PTT .It receives a...
2860
John Wiseman
gm8bpq
Mar 5, 2010 3:34 pm
From the BPQ32 WINMOR documentation: The driver supports PTT control via a serial port, using the DTR and/or RTS control lines, or ICOM CI-V commands, via the...
2859
Howard Z
howard_z
Mar 5, 2010 3:17 pm
Ok, Let me see... I see where to specify the Audio In and Audio Out. That's done in Winmor and stored it Winmor's INI file. Where does one specify PTT? The COM...
2858
Howard Z
howard_z
Mar 5, 2010 2:38 pm
Thanks Rick, Got it. Howard...
2857
Rick Muething
kn6kb
Mar 5, 2010 12:48 pm
Trip, The "speed" (net bytes/min) in WINMOR is a function of: The modulation mode used 4FSK, 4PSK, 8PSK, 16PSK, And the number of repeats necessary ( for...
2856
John Wiseman
gm8bpq
Mar 5, 2010 9:15 am
Events move quickly... The email announcing the latest update included a link (http://www.cantab.net/users/john.wiseman/Documents/Using%20WINMOR.htm) to a...
2855
Robert S. Fisher
wa7rf
Mar 5, 2010 7:47 am
It's the overhead at the start of the connection. Winmor does a lot mode shifting with poor paths at the first of the connect especially if the path is poor...
2854
kt4wo67@...
kt4wo
Mar 5, 2010 5:46 am
Let me say this 1st: I have ONLY used BPQ/Winmor to pull nodes/routes/ports,etc lists from a few other users and send one message. Has there been any...
2853
Rick Muething
kn6kb
Mar 5, 2010 2:34 am
Howard,/All, I have posted the latest WINMOR TNC on: http://groups.yahoo.com/group/WINMOR http://groups.yahoo.com/group/Winlink_Programs_Group And I have sent...
2852
Howard Z
howard_z
Mar 5, 2010 1:47 am
So... Where do we download the latest WINMOR TNC? Also, in BPQ Terminal after we attach to the port for WINMOR TNC, what are the commands we can type in? How...
2851
John Wiseman
gm8bpq
Mar 4, 2010 6:55 pm
Russ, You don't need BPQTNC2 or VCOMConfig. I loaded your config here, and it is sending the right packets on the serial port. I suggest you double check that...
2850
kc5cnt
Mar 4, 2010 4:24 pm
Hey Otto, The firmware is 2.85 and I enabled the kiss setting then perm. On the KPC-3, it had the latest firmware for the straight 3 and is in kiss mode. 73 de...
2849
K.O. Higgs
khiggs74
Mar 4, 2010 3:47 pm
I am using two KAM's with my BPQ32 system. Attached is a copy of the parameters for one of the KAMs.. K.O. N0KFQ On 3/4/2010 9:06 AM, kc5cnt wrote: Hello...
2848
Edward Tune
kv7j
Mar 4, 2010 3:34 pm
Just a thought as you have probably already done this, are you sure the TNC is in KISS mode before you turn it over to the node? I could be wrong but I think...
2847
kc5cnt
Mar 4, 2010 3:23 pm
Hello folks, After a recommendation by a great friend, I decided to upgrade my Msys BBS to BPQ32. I believe that I have it configured correctly but I am not...
2846
John Wiseman
gm8bpq
Mar 3, 2010 11:09 am
The version of the WINMOR TNC on the WINMOR Yahoo group (4.1.11) is NOT fully compatible with the latest BPQ32 winmor.dll.. You need at least Version 1.0.0.1....
2845
D.Calder
n4zkf
Mar 3, 2010 10:22 am
Yea, I know. I have been watching. (and hearing) From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of Art Bertheaume Sent: Wednesday, March...
2844
Art Bertheaume
abertheaume
Mar 3, 2010 10:16 am
Dave, We have been testing BPQ32 Mail forward using winmor for several days now and also using winmor in FEC mode which at this time, only BPQ32 is capable of...
2843
D.Calder
n4zkf
Mar 3, 2010 10:11 am
I think the Winmor discussion, should stay on that reflector. MY Opinion. 73 Dave n4zkf n4zkf@... www.n4zkf.com From: BPQ32@yahoogroups.com...
2842
abertheaume
Mar 3, 2010 2:26 am
I have to ask, Given that Winmor forwarding is still in its infancy and all, I would think it doesn't really have wide spread use yet. I could be wrong. That...
2841
kt4wo67@...
kt4wo
Mar 3, 2010 2:08 am
Rick,,,, Let me also say...I cant tell you how EXCITED about Winmor I am!!! It seems to be working GREAT..and was needed!! Altho I am mostly a KtoK op..I have...
2840
kt4wo67@...
kt4wo
Mar 3, 2010 1:54 am
Rick, I agree..and understand that we all cant go to the auto-subbands...I guess one thing that I saw that could be a problem was we seem to be spread...
2839
Rick Muething
kn6kb
Mar 3, 2010 1:31 am
Trip, Your comments well put. They bring up some important points and necessary operating practices. Here is my feelings as developer of WINMOR and what we...
2838
kt4wo67@...
kt4wo
Mar 3, 2010 1:10 am
..before I am jumped, I didnt say it was Illegal..just bad press. Trip - KT4WO...
2837
kt4wo67@...
kt4wo
Mar 3, 2010 12:59 am
Let me say this 1st...I am not trying to start something!! Nor is this is a flame. IMHO..and thats what it is... "attended station" is not just being at...
2836
kt4wo67@...
kt4wo
Mar 3, 2010 12:53 am
Working well here also..I am using the latest TNC from Winmor group also. Trip - KT4WO...
2835
gervais
ve2ckn
Mar 2, 2010 2:00 am
ve2rxy-11 updated gervais From: Jerry - N9LYA Sent: Sunday, February 28, 2010 4:31 PM To: BPQ32@yahoogroups.com ; BPQMailChat@yahoogroups.com Subject: [BPQ32]...
