Some versions of NOS include an option to use DOS BPQCODE to interface to radio ports. My testing was with JNOS 1.10x10. You can use these versions with BPQ32...
BPQ32 includes an IP Gateway Option, which can give applicaiions wiritten to use IP over ax.25 (such as MSYS) access to the Internet. The BPQ32 IP Gateway...
When 'logging' is enabled in the Telnet Server, what folder is the log file data written to and what is the appendage ?? It doesn't appear to be in the BPQ32...
Mark, The file is BPQTelnetServer.log, it is created in the current directory, and is appended to for each session 73, John ... From: BPQ32@yahoogroups.com...
Looking for the guru of X14J out there. I have run various versions of BPQ from back in the good ole days of DOS in Panama to version 'i' right now but usually...
Otto, you may want to look at how you can hook bpq up to a x1j4 node stack. We had 2 DOS FBB/BPQ systems here like that. We made an adapter with a 1k resistor...
You might also consider that the x1j node runs netrom not kiss and you have to set your pc or other equipment that is to connect to the the serial port of the...
Thank you, Mike and Klaus. I had considered building a "small stack" and may still try that out. I keep looking at what is coming out of the TNC and what is...
We have been using bpq and netrom X1JR-4 together for the past 20 yrs without problems connected to a diode matrix and they work quite well at the repeater...
Hi Otto, yes that was it, we had bpq in NETROM mode. We also had one of these DOS FBB/BPQ setups right beside a high power paging system on the ridge. We never...
Hi Folks, It is possible that there is a problem with the netrom driver in WIn32. Is (or has) anyone successfully inked bpq32 (not bpqcode or Data Engine) to a...
Got it, Klaus! As I was thinking about it and doing a bit or research, I relized with just a computer running BPQ and a TNC (node), I don't need a diode in...
Otto, You don't need a crossover beween a TNC and a PC (at least not for any TNC I've ever used). Just a straight through cable. A normal KISS TNC doesn't need...
In the BPQ32 installation you will find a file named BPQ32_RS232_Cabling.htm in the docs folder. That document explains "Cabling BPQ32 to a NETROM TheNet/X1J4...
Thanks for the comments, Ron... That is actually where I started... did a quick convert to DB-9 stuff. Think everything was DB-9 to DB-25 in your missive. I...
If you connect a pc serial port to the x1j I believe you need a resistor on one of the terminals at the pc end as someone else suggested. Best regards, Klaus...
I'm having fun getting BPQ32 set up and running. It's going to be the idea front end to the "dosn'ess" of JNOS. Anyhow, right now I'm a little stuck trying to...
Bill While from BPQTerminal you can type a command such as: C victor via k7idx This same command in the applications string is not properly parsed. John G8BPQ...
Bill, The total length of a command and it's alias is 16 bytes. This isn't intended as a general connect command, but as a way of connecting to applications on...
Thanks for the info... ... Ok. It's a little less feature rich then the Linux "node" program which has something like 5 options for the aliases.. Keeping...
Hi, Can anyone offer any suggestions a system will NOT receive from other stations on AX/IP/UDP? Monitoring VE3KPG (see below), I can see that KPG is receiving...
Reply sent direct Mike Melnik N9PMO Web Site: <http://www.n9pmo.com> www.n9pmo.com ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of...
I use a KAMXL with MSYS also in KISS mode. It took some finagling to get it to work the correct port. May have similar issue with BPQ32. I might be able to...
Please share any Kam-xl tidbits here on the list. I scored one last weekend at the big Western -WA swapfest of the year in Puyallup and I'm looking forward to...
Information below applies to BPQ32 Only Setup for Kantronics 9612 and KAM, 9612 Plus & KAMXL allow for a higher COMM Port BAUD Rate, it has been found in the...
Bill... I will do some research and experimentation... I do know the difference in the KAMXL does NOT Apply to the KAM KAM PLUS KAM98 or KPC9612... I just...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
