Hi all still having problems with telnet. I still get bind(sock) failed error 10048.I think I have bpqcfg not set up right and not sure about the port. I...
You are probably using the BPQ Telnet port in some other application that you are running. Check your BPQTelnetServer.cfg file to see what TCPPORT= is set to....
This is a little off the groups main interest. But given the new support development for RMS, I thought I would ask my question here. Does anyone know how to...
Mark Running the 999.1.1.4.2 in the Beacon Path first DIGI,2nd DIGI, MILSW,KB9PRF,KB9UNZ Hope this helps, I have noticed a problem with the optional Log On...
I have an ancient 486 with 8 megs of memory running BPQ (408 I think) and a BBS - AA4RE to be specific. Three of the four serial ports are configured in BPQ...
Hi Mark K2CAN Thanks for the help I got it going. The telnet server is idle I then go to run and type http://localhost :8010 and the telnet server goes To...
Hi Richard, Try - telnet://localhost:8010 Note the 'telnet'.. You were trying to use HTTP to access a telnet server. You need to be using a telnet client to...
Hi Al, There is no way to use a terminal program to directly access the Node without using any type of protocol that I am aware of. John can correct me about...
I hope someone can help explain why I occassionaly get "Busy From" when connecting to one of my nodes through another node. I'm using BPQ32 version 4.10.1.2...
Hi all.. another option is via agw and tsthwin or winpack with this config it also possible to work via unproto beacons of the bbs :) another way is with...
Lately I have been plagued by European BPQ32 node sysops initiating links to my node unilaterally. Sysops please note: axudp links are by agreement of the...
Eric I think one has to understand that many that have installed BPQ32 are not aware an agreement should First be setup between sysops and node broadcast on...
I will put something about this in the installation doc. Also another good place for it would be as commentary in the bpqaxip.cfg file. It's the presence...
Ok...For the newbie in me, what does this all mean? I just not understanding this... 73 Mike - N7ZEF ... From: Ron Stordahl To: BPQ32@yahoogroups.com Sent:...
Ron, You might want to consider reming out the lines in the bpqcfg file as well as the ipads in the bpqaxip cfg file in future shipped revisions. That way, a...
Eric, I've been plagued with this as well. In a couple of cases I was able to find an email address for the node callsign (which I assumed was the sysop) and...
With RF links, a node broadcast is received by an area node and usually a route forms between the two nodes as seen in the routes tables. Even if there has not...
Mike If one is setting up BPQ32 using one of the two Example\Large Files BPQaxip.cfg files in the BPQ Folder Both files have entries similar to the following: ...
I will think this over and I will change things in the next installer to deal with this problem. Ron, N5IN ________________________________ From: Mike Melnik...
Hi to all in the group. Im newbie with BPQ and need litle help with it. I want to set BPQ with AR Cluster (DXCIG:9a1cig-1 telnet://dxc9a1cig.dyndns.org:23). ...
Are you running any other applications BBS, Etc? I will be more then happy to set up a link, have seen your Call in my AXIP MHeard list last week, Let me know...
... my AXIP ... BPQCFG.TXT and ... Hi Mike :-). Im not runing any other aplications only AR Cluster. Last week I tryed first time BPQ because you could see my...
Response sent by E-Mail Mike Melnik N9PMO ... From: BPQ32@yahoogroups.com [mailto:BPQ32@yahoogroups.com] On Behalf Of ricoo_st Sent: Tuesday, November 04, 2008...
Hi All, Today I have changed callsigns etc for the AXUDP links. If you have an AXUDP link with me then could you please change the link callsign to: ...
Hello all.. i was wondering if it is possible to load my pk-88 with a KISS eprom. i found there is TF for the PK- series but could'nt find rom images for ...
Hi Danny, Look here http://www.tapr.org/kits_dcd.html 73 Phillip ZL2TZE ... From: Danny Date: 6/11/2008 9:29:11 a.m. To: xrouter@yahoogroups.com Subject:...
Hi All, The testing I was doing in a change over here has not worked as expected so I have changed back to Xrouter for the Node software. Please change the...
