Anyone know what the current firmware version is for the BCD396XT??

Thanks

That information is always available at
http://info.uniden.com/twiki/pub/publish/BCD396XTFirmwareUpdate.html.
 

1.10.00

UpMan
UpMan FAQ: http://info.uniden.com/UnidenMan4/UpMan -- Please read before
emailing me directly


>________________________________
> From: sks1084 <sks1084@...>
>To: BCD396XT@yahoogroups.com
>Sent: Thursday, October 18, 2012 10:21 AM
>Subject: [BCD396XT] Firmware
>
>
>
> 
>
>Anyone know what the current firmware version is for the BCD396XT??
>
>Thanks
>
>
>
>
>

[Non-text portions of this message have been removed]

Go here
http://info.uniden.com/twiki/bin/view/UnidenMan4/BCD396XTFirmwareUpdate

Clark


At 08:21 AM 10/18/2012, you wrote:

>Anyone know what the current firmware version is for the BCD396XT??
>
>Thanks


[Non-text portions of this message have been removed]

I was at Radio Shack, and noticed they had a Enercell Car Power Adapter on
clearance for $4.97.  Part #273-368.
It's rated at 6VDC@1000ma.  I also got a right angle Adaptaplug Tip "B" series.
 It's specs are:

4.00mm O.D.
1.7mm I.D.

When you buy the Car Power adapter, you get an Adaptaplug tip included in the
price.  Part # 273-335
That's saved $6.95.  So this made the whole setup real attractive for $5.38
total.

I noticed when I seated the tip plug into the radio there is a slight bit of
play, compared to the plug that comes 
furnished with the Uniden AC Adapter...

I haven't check the specs on the Uniden plug, but this made me wonder if the
plug is unique...

-Lance

[Non-text portions of this message have been removed]

uhh... you get what you pay for?

GMAN
_____________________________________

From: Lance Star <milcom_chaser@...>
To: BCD396XT@yahoogroups.com
Sent: Friday, October 19, 2012 4:04 PM
Subject: [BCD396XT] Pin Plug Diameter...


 

I was at Radio Shack, and noticed they had a Enercell Car Power Adapter on
clearance for $4.97.  Part #273-368.
It's rated at 6VDC@1000ma.  I also got a right angle Adaptaplug Tip "B" series.
 It's specs are:

4.00mm O.D.
1.7mm I.D.

When you buy the Car Power adapter, you get an Adaptaplug tip included in the
price.  Part # 273-335
That's saved $6.95.  So this made the whole setup real attractive for $5.38
total.

I noticed when I seated the tip plug into the radio there is a slight bit of
play, compared to the plug that comes 
furnished with the Uniden AC Adapter...

I haven't check the specs on the Uniden plug, but this made me wonder if the
plug is unique...

-Lance

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

My scanner has been working just great untill last monday, It was scanning, and
working as normal and all of a sudden it shut off...Hmmmm I thought maybe the
batteries were down so I turned it back on, pushed the volume knob, and it
showed 3.8 volts, no problem, so I left it on, and in a few minutes poof, it
went off again...So, I took off the battery cover, and removed the batteries,
checked the contact points, (all was well) and replaced the batteries.  Turned
the scanner back on and all was well ..it worked for about 10 min. and then went
Off again. Once again I turned the scanner back on, and I get this wierd static,
and very loe volume like the antenna is not working properly, and then Poof off
it goes again. Hmm so back on it goes, and now i'm getting what looks like a bar
code across the screen, it blinks and then a streight line across the middle of
the screen, and poof it's off again...It does this on batteries, or the car
charger. The Batteries are freshly charged, and th scanner has never been
dropped or dammaged.

Any one have any Ideas? or has anyone else had this problem???

UPMAN, where are you?????? Help!!!!!

I don't know what the technical cause would be, but it is almost certainly an
issue requiring repair.




________________________________
From: TrkNTrlrMan <trkntrlrman@...>
To: BCD396XT@yahoogroups.com
Sent: Fri, October 19, 2012 5:16:02 PM
Subject: [BCD396XT] What the heck????

 
My scanner has been working just great untill last monday, It was scanning, and
working as normal and all of a sudden it shut off...Hmmmm I thought maybe the
batteries were down so I turned it back on, pushed the volume knob, and it
showed 3.8 volts, no problem, so I left it on, and in a few minutes poof, it
went off again...So, I took off the battery cover, and removed the batteries,
checked the contact points, (all was well) and replaced the batteries. Turned
the scanner back on and all was well ..it worked for about 10 min. and then went
Off again. Once again I turned the scanner back on, and I get this wierd static,
and very loe volume like the antenna is not working properly, and then Poof off
it goes again. Hmm so back on it goes, and now i'm getting what looks like a bar
code across the screen, it blinks and then a streight line across the middle of
the screen, and poof it's off again...It does this on batteries, or the car
charger. The Batteries are freshly charged, and th scanner has never been
dropped or dammaged.


Any one have any Ideas? or has anyone else had this problem???

UPMAN, where are you?????? Help!!!!!




[Non-text portions of this message have been removed]

Remove the batteries,  and try to run from the charger only.



Sent from my Verizon Wireless 4GLTE smartphone



[Non-text portions of this message have been removed]

Oh yea,  reset too.    Thete may be a hosed system in it.

Sent from my Verizon Wireless 4GLTE smartphone



[Non-text portions of this message have been removed]

@ Paul, thanks I think your right, really ticks me off, one month past
warranty.... I think something is rotten in texas, but oh well...
@ Don, You wern't paying attention Tried it on the charger no help, cleared it
and reloaded it, nada...

So, Monday I call Uniden, and get it shipped off... Like I really needed to
spend the money, Unfortunatly Social Security doesn't cover those
things....hehehhehehe Medical may cover it once I get the BILL
tho....heheheheheh I see another heart attack coming on...hehhehhe
I don't think they're built to Military Specs...Unfortunatly....

Good Luck Guys...

I can't see how a "hosed" system would cause that. It could be a bad
cell, but I don't know if "TNTM" (he didn't post his name) tried the
charger with or without the cells.

It definitely sounds like something is wrong in the power system.

If I had to make an educated guess, I might even guess the CPU. That
brings up an interesting possibility: Do you have the latest firmware?
If not, try uploading the latest. It's remotely possible it could be
corrupted firmware.

Joe M.

Don.Curtis@... wrote:
> Oh yea,  reset too.    Thete may be a hosed system in it.
>
> Sent from my Verizon Wireless 4GLTE smartphone
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.930 / Virus Database: 2441.1.1/5341 - Release Date: 10/19/12
02:34:00
>

If you go to the Uniden web site under support you can fill out a repair form to
print and include with the scanner when you return it.  Their flat repair rate
is $49.50 plus an additional $10.00 for return shipping.

I recently returned a BC898T to them to have the damaged front panel/case
replaced.  I shipped it to them via UPS.  They return by USPS.  At one time the
front panel was available thru their parts dept., but is no longer available. 
However, it was available thru their repair dept.  It took about 3 weeks total
time from the day I shipped the unit to them until I got it back.

From: TrkNTrlrMan
Sent: Friday, October 19, 2012 9:21 PM
To: BCD396XT@yahoogroups.com
Subject: [BCD396XT] Thanks guys

@ Paul, thanks I think your right, really ticks me off, one month past
warranty.... I think something is rotten in texas, but oh well...
@ Don, You wern't paying attention Tried it on the charger no help, cleared it
and reloaded it, nada...

So, Monday I call Uniden, and get it shipped off... Like I really needed to
spend the money, Unfortunatly Social Security doesn't cover those
things....hehehhehehe Medical may cover it once I get the BILL
tho....heheheheheh I see another heart attack coming on...hehhehhe
I don't think they're built to Military Specs...Unfortunatly....

Good Luck Guys...





[Non-text portions of this message have been removed]

Looks like the slight play in the way the plug feels once seated in the radio is
due to the  EIAJ TYPE-II jack has an O.D. of 4.4mm, while the plug (Adaptaplug
"B") from Radio Shack is spec'd at 4.0mm, so 4 tenths of a millimeter in
difference...
Anyone know where I can source the plugs Uniden uses?
Thanks,
-Lance


[Non-text portions of this message have been removed]

Ok, I'm still having trouble getting reliable decodes on P25 even when I'm in
close range of the transmitter.  The transmissions break up frequently no matter
the antenna.

But, here's another interesting thing I noticed.  If I turn on the radio
normally, I have trouble with the P25 decoding.  If I turn it on using
Hold+power (which activates the hidden P25 menu items), decoding improves a bit.
Was that supposed to be a feature of the updated firmware or is it supposed to
use the hidden menu settings at all times regardless of power up mode?

What mode are you using for it?

Joe M.

Alex wrote:
> Ok, I'm still having trouble getting reliable decodes on P25 even when I'm in
close range of the transmitter.  The transmissions break up frequently no matter
the antenna.
>
> But, here's another interesting thing I noticed.  If I turn on the radio
normally, I have trouble with the P25 decoding.  If I turn it on using
Hold+power (which activates the hidden P25 menu items), decoding improves a bit.
Was that supposed to be a feature of the updated firmware or is it supposed to
use the hidden menu settings at all times regardless of power up mode?
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.930 / Virus Database: 2441.1.1/5344 - Release Date: 10/20/12
14:34:00
>

At 07:04 AM 10/20/2012, you wrote:

>I was at Radio Shack, and noticed they had a Enercell Car Power
>Adapter on clearance for $4.97.  Part #273-368.
>It's rated at 6VDC@1000ma.  I also got a right angle Adaptaplug Tip
>"B" series.  It's specs are:
>
>4.00mm O.D.
>1.7mm I.D.
>
>When you buy the Car Power adapter, you get an Adaptaplug tip
>included in the price.  Part # 273-335
>That's saved $6.95.  So this made the whole setup real attractive
>for $5.38 total.
>
>I noticed when I seated the tip plug into the radio there is a
>slight bit of play, compared to the plug that comes
>furnished with the Uniden AC Adapter...
>
>I haven't check the specs on the Uniden plug, but this made me
>wonder if the plug is unique...

Well, I bought a DC regulator, so I could run my scanner.  None of
the plugs available will fit the 396XT. :(

73 de VK3JED / VK3IRL
http://vkradio.com

I find the Sony Yellow plug works for me.

-----Original Message-----
From: BCD396XT@yahoogroups.com [mailto:BCD396XT@yahoogroups.com] On Behalf
Of Tony Langdon, VK3JED
Sent: Sunday, 21 October 2012 17:04
To: BCD396XT@yahoogroups.com
Subject: Re: [BCD396XT] Pin Plug Diameter...

At 07:04 AM 10/20/2012, you wrote:

>I was at Radio Shack, and noticed they had a Enercell Car Power Adapter
>on clearance for $4.97.  Part #273-368.
>It's rated at 6VDC@1000ma.  I also got a right angle Adaptaplug Tip "B"
>series.  It's specs are:
>
>4.00mm O.D.
>1.7mm I.D.
>
>When you buy the Car Power adapter, you get an Adaptaplug tip included
>in the price.  Part # 273-335 That's saved $6.95.  So this made the
>whole setup real attractive for $5.38 total.
>
>I noticed when I seated the tip plug into the radio there is a slight
>bit of play, compared to the plug that comes furnished with the Uniden
>AC Adapter...
>
>I haven't check the specs on the Uniden plug, but this made me wonder
>if the plug is unique...

Well, I bought a DC regulator, so I could run my scanner.  None of the plugs
available will fit the 396XT. :(

73 de VK3JED / VK3IRL
http://vkradio.com



------------------------------------

Yahoo! Groups Links

Also try a new set of batteries just to rule them out as well.  I hope you
get it fixed and don't have to send it in for repair.  Lots of good tips
given, try those tips first and see what happens.  Hopefully you can narrow
it down to something simple.

Take care,
Joe
On Oct 20, 2012 12:24 AM, "MCH" <mch@...> wrote:

> **
>
>
> I can't see how a "hosed" system would cause that. It could be a bad
> cell, but I don't know if "TNTM" (he didn't post his name) tried the
> charger with or without the cells.
>
> It definitely sounds like something is wrong in the power system.
>
> If I had to make an educated guess, I might even guess the CPU. That
> brings up an interesting possibility: Do you have the latest firmware?
> If not, try uploading the latest. It's remotely possible it could be
> corrupted firmware.
>
> Joe M.
>
> Don.Curtis@... wrote:
> > Oh yea, reset too. Thete may be a hosed system in it.
> >
> > Sent from my Verizon Wireless 4GLTE smartphone
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> > ----------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.930 / Virus Database: 2441.1.1/5341 - Release Date:
> 10/19/12 02:34:00
> >
>
>


[Non-text portions of this message have been removed]

Mode as in modulation or something else?

The systems are programmed to use NFM Digital audio only (not auto).  I suppose
I could try to use the wider FM mode.

--- In BCD396XT@yahoogroups.com, MCH <mch@...> wrote:
>
> What mode are you using for it?
>
> Joe M.
>
> Alex wrote:
> > Ok, I'm still having trouble getting reliable decodes on P25 even when I'm
in close range of the transmitter.  The transmissions break up frequently no
matter the antenna.
> >
> > But, here's another interesting thing I noticed.  If I turn on the radio
normally, I have trouble with the P25 decoding.  If I turn it on using
Hold+power (which activates the hidden P25 menu items), decoding improves a bit.
Was that supposed to be a feature of the updated firmware or is it supposed to
use the hidden menu settings at all times regardless of power up mode?
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 9.0.930 / Virus Database: 2441.1.1/5344 - Release Date: 10/20/12
14:34:00
> >
>

--- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@...> wrote:
>
> Looks like the slight play in the way the plug feels once seated in the radio
is due to the  EIAJ TYPE-II jack has an O.D. of 4.4mm, while the plug
(Adaptaplug "B") from Radio Shack is spec'd at 4.0mm, so 4 tenths of a
millimeter in difference...
> Anyone know where I can source the plugs Uniden uses?
> Thanks,
> -Lance


If you don't mind cutting the cord and splicing a whole new connector on there
then go to Digikey or Mouser.  They have the proper sized barrel connector in
both straight and right angle configurations.

I made my own 12 volt adapter and bought a cord from Digikey (Mouser has the
same ones, too) that had a molded, right angle connector on the end.  Works
fine, no loose connections.

--- In BCD396XT@yahoogroups.com, Lance <milcom_chaser@...> wrote:
>
> Scott,
>
> Can you power the radio up on Alkaline Batteries, no external power source?
>
> Illegal Voltage means the source voltage your using is too high...

"Illegal voltage" will also be displayed if the voltage is too low (I think it
appears around 5.0 V, it happens a lot when I power from an external battery
that has run low.)

Exactly my suggestion. They may not be using NFM mode. Try FM.

Joe M.

Alex wrote:
> Mode as in modulation or something else?
>
> The systems are programmed to use NFM Digital audio only (not auto).  I
suppose I could try to use the wider FM mode.
>
> --- In BCD396XT@yahoogroups.com, MCH <mch@...> wrote:
>> What mode are you using for it?
>>
>> Joe M.
>>
>> Alex wrote:
>>> Ok, I'm still having trouble getting reliable decodes on P25 even when I'm
in close range of the transmitter.  The transmissions break up frequently no
matter the antenna.
>>>
>>> But, here's another interesting thing I noticed.  If I turn on the radio
normally, I have trouble with the P25 decoding.  If I turn it on using
Hold+power (which activates the hidden P25 menu items), decoding improves a bit.
Was that supposed to be a feature of the updated firmware or is it supposed to
use the hidden menu settings at all times regardless of power up mode?
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>> ------------------------------------------------------------------------
>>>
>>>
>>> No virus found in this incoming message.
>>> Checked by AVG - www.avg.com
>>> Version: 9.0.930 / Virus Database: 2441.1.1/5344 - Release Date: 10/20/12
14:34:00
>>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Alex,
I was thinking of doing that.  Radio Shack's connector series has a loose spec
from what I read on Wikipedia.
Do you have part numbers from mouser and digikey?  That would be helpful.
Thanks again,
-Lance


--- On Sun, 10/21/12, Alex <agcme2002@...> wrote:

From: Alex <agcme2002@...>
Subject: [BCD396XT] Re: Pin Plug Additional...
To: BCD396XT@yahoogroups.com
Date: Sunday, October 21, 2012, 7:51 PM
















 













--- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@...> wrote:

>

> Looks like the slight play in the way the plug feels once seated in the radio
is due to the  EIAJ TYPE-II jack has an O.D. of 4.4mm, while the plug
(Adaptaplug "B") from Radio Shack is spec'd at 4.0mm, so 4 tenths of a
millimeter in difference...

> Anyone know where I can source the plugs Uniden uses?

> Thanks,

> -Lance



If you don't mind cutting the cord and splicing a whole new connector on there
then go to Digikey or Mouser.  They have the proper sized barrel connector in
both straight and right angle configurations.



I made my own 12 volt adapter and bought a cord from Digikey (Mouser has the
same ones, too) that had a molded, right angle connector on the end.  Works
fine, no loose connections.



























[Non-text portions of this message have been removed]

Alex, 
If I could source the right angle connector with a long lead on it, I could
solder it in placeof the current wire lead off the cigarette lighter plug...
-Lance

[Non-text portions of this message have been removed]

I don't have the part numbers but both sites have good search engines that
filter by specification so you'll be able to find the parts pretty easily.

--- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@...> wrote:
>
> Alex,
> I was thinking of doing that.  Radio Shack's connector series has a loose
spec from what I read on Wikipedia.
> Do you have part numbers from mouser and digikey?  That would be helpful.
> Thanks again,
> -Lance
>
>
> --- On Sun, 10/21/12, Alex <agcme2002@...> wrote:
>
> From: Alex <agcme2002@...>
> Subject: [BCD396XT] Re: Pin Plug Additional...
> To: BCD396XT@yahoogroups.com
> Date: Sunday, October 21, 2012, 7:51 PM
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>  
>
>
>
>
>
>
>
>
>
>
>
>
>
> --- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@> wrote:
>
> >
>
> > Looks like the slight play in the way the plug feels once seated in the
radio is due to the  EIAJ TYPE-II jack has an O.D. of 4.4mm, while the plug
(Adaptaplug "B") from Radio Shack is spec'd at 4.0mm, so 4 tenths of a
millimeter in difference...
>
> > Anyone know where I can source the plugs Uniden uses?
>
> > Thanks,
>
> > -Lance
>
>
>
> If you don't mind cutting the cord and splicing a whole new connector on there
then go to Digikey or Mouser.  They have the proper sized barrel connector in
both straight and right angle configurations.
>
>
>
> I made my own 12 volt adapter and bought a cord from Digikey (Mouser has the
same ones, too) that had a molded, right angle connector on the end.  Works
fine, no loose connections.
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

Both Digikey and Mouser sell this configuration which is what I purchased.  It's
a molded connector with bare leads on the other end.  The wire is somewhere
between 6 and 10 feet long so you have plenty of options.  When you use the
catalog search features of either site you should come across them pretty
quickly.

Digikey's search is under the Product Index where you then select the product
category and subcategory -- in this case Connectors, Barrel - Power should get
you started and will eventually show you the filter list.  Mouser's search
starts by selecting the large categories on their main page -- I think
"Connectors" and then "DC Power Connectors" will give you bare connectors while
"Wire and Cable" and then "Cable Assemblies" will get you the molded connectors
with wire and the filter list, too.



--- In BCD396XT@yahoogroups.com, Lance Star <milcom_chaser@...> wrote:
>
> Alex, 
> If I could source the right angle connector with a long lead on it, I could
solder it in placeof the current wire lead off the cigarette lighter plug...
> -Lance
>
> [Non-text portions of this message have been removed]
>

GRE America Inc. Press Release
<http://www.greamerica.com/support/index.php?_m=news&_a=viewnews&newsid=\
38>
http://www.greamerica.com/support/index.php?_m=news&_a=viewnews&newsid=3\
8
Posted By: GRE Support Team On: 23 Oct 2012 04:38 PM
Details  GRE Official Announcement 10/23/2012

October 23, 2012


To our valued Dealers and Customers,

Due to circumstances beyond its control, General Research of Electronics
of Japan (GRE)
is temporarily not able to manufacture the GRECOM and Radio Shack
branded radio scanners.

The Chinese Government’s plan to redevelop the area where the GRE
factory had been in
operation for over ten years finally forced its closure. Anticipating
this eventuality,
GRE was in the process of building a new factory but unfortunately the
cost of raw materials,
labor and increased taxes created a heavy financial investment burden
that could not be
effectively recovered.

GRE America continues to market, support and service the GRECOM branded
scanners and is
contractually committed to keep the Library Database updated and
current.  GRE America
will continue to market, service and support Alinco’s radio
products without any interruption.

We sincerely apologize for this unfortunate turn of events. GRE is
proceeding to establish
a contract with a new factory and believes it will be able to restart
the manufacturing in
the near future.


For continued sales, service and support, please contact the GRE America
office.

Raj Gounder
Director of sales
GRE America, Inc.



[Non-text portions of this message have been removed]

My Jabra A210 Bluetooth adapter no longer works (battery , etc. ) and is no
longer available nor is the Jabra A120S.
Any suggestion for a replacement adapter with either a 2.5 or 3.5 mm plug.
I use this with Bluetooth ear piece when in a crowd.

Clark

I noticed some cheap BT adapters on eBay earlier this week. I didn't
look too hard since I am currently not in need of any, but I noticed it
had the correct size plug for the 396 (3.5mm).

Joe M.

Clark Rennie wrote:
> My Jabra A210 Bluetooth adapter no longer works (battery , etc. ) and is no
> longer available nor is the Jabra A120S.
> Any suggestion for a replacement adapter with either a 2.5 or 3.5 mm plug.
> I use this with Bluetooth ear piece when in a crowd.
>
> Clark
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.930 / Virus Database: 2441.1.1/5382 - Release Date: 11/08/12
03:54:00
>

Not as cheap as others, but the BTT005 looks pretty small - maybe half
the size of the A120S (about the same size, but half as thin). Looks to
be in the $25-35 shipped range on eBay.

I haven't tried these, so I can't say how well they work, but it's got
the right plug on it.

There are other units that are around $10 shipped, but they look larger.
Still, that should work. for those, search on the terms "bluetooth
adapter 3.5 -usb" (minus the quotes, of course).

Joe M.

MCH wrote:
> I noticed some cheap BT adapters on eBay earlier this week. I didn't
> look too hard since I am currently not in need of any, but I noticed it
> had the correct size plug for the 396 (3.5mm).
>
> Joe M.
>
> Clark Rennie wrote:
>> My Jabra A210 Bluetooth adapter no longer works (battery , etc. ) and is no
>> longer available nor is the Jabra A120S.
>> Any suggestion for a replacement adapter with either a 2.5 or 3.5 mm plug.
>> I use this with Bluetooth ear piece when in a crowd.
>>
>> Clark
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 9.0.930 / Virus Database: 2441.1.1/5382 - Release Date: 11/08/12
03:54:00
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.930 / Virus Database: 2441.1.1/5382 - Release Date: 11/08/12
03:54:00
>