Hello,

Set a custom search range. From the custom search options menu, select CC Only.
With CC Only enabled, the scanner only stops on Control Channels, and will trunk
and follow TG's from the CC found.

73

Dave L.

Sent from an Apple iGadget.


On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:

> Dear group,
>
> Anyone know how to automatically search for control channel ?
> the only way i know is using custom search , then press hold and tune for the
control channel one by one =_=
>
> Regards,
> Arif
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

Hi Dave,

I have tried it, but seems the custom search cannot find the CC and stop, the
custom search just keep on searching so i have to put it on hold and tune it
manually..

--- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:

From: Dave Landrum <h8digitalradio@...>
Subject: Re: [BC346XT] Automatically search Control Channel
To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
Date: Tuesday, May 3, 2011, 4:58 PM
















 









       Hello,



Set a custom search range. From the custom search options menu, select CC Only.
With CC Only enabled, the scanner only stops on Control Channels, and will trunk
and follow TG's from the CC found.



73



Dave L.



Sent from an Apple iGadget.



On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:



> Dear group,

>

> Anyone know how to automatically search for control channel ?

> the only way i know is using custom search , then press hold and tune for the
control channel one by one =_=

>

> Regards,

> Arif

>

> [Non-text portions of this message have been removed]

>

>



[Non-text portions of this message have been removed]



























[Non-text portions of this message have been removed]

Hello,

The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25 System
in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.

Which system type and frequency range are you trying to find CC's using the
BC346XT?

73

Dave L.

Sent from an Apple iGadget.


On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:

> Hi Dave,
>
> I have tried it, but seems the custom search cannot find the CC and stop, the
custom search just keep on searching so i have to put it on hold and tune it
manually..
>
> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>
> From: Dave Landrum <h8digitalradio@...>
> Subject: Re: [BC346XT] Automatically search Control Channel
> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> Date: Tuesday, May 3, 2011, 4:58 PM
>
>
>
> Hello,
>
> Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
>
> > Dear group,
>
> >
>
> > Anyone know how to automatically search for control channel ?
>
> > the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=
>
> >
>
> > Regards,
>
> > Arif
>
> >
>
> > [Non-text portions of this message have been removed]
>
> >
>
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

Hello,

Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.

73

Dave L.

Sent from an Apple iGadget.


On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:

> Hello,
>
> The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.
>
> Which system type and frequency range are you trying to find CC's using the
BC346XT?
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:
>
> > Hi Dave,
> >
> > I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..
> >
> > --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
> >
> > From: Dave Landrum <h8digitalradio@...>
> > Subject: Re: [BC346XT] Automatically search Control Channel
> > To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> > Date: Tuesday, May 3, 2011, 4:58 PM
> >
> >
> >
> > Hello,
> >
> > Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
> >
> > 73
> >
> > Dave L.
> >
> > Sent from an Apple iGadget.
> >
> > On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
> >
> > > Dear group,
> >
> > >
> >
> > > Anyone know how to automatically search for control channel ?
> >
> > > the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=
> >
> > >
> >
> > > Regards,
> >
> > > Arif
> >
> > >
> >
> > > [Non-text portions of this message have been removed]
> >
> > >
> >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

it's toobad bearcat cant update the software so the scanner would do this.

--- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:


From: Dave Landrum <h8digitalradio@...>
Subject: Re: [BC346XT] Automatically search Control Channel
To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
Date: Tuesday, May 3, 2011, 10:27 AM


 



Hello,

Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.

73

Dave L.

Sent from an Apple iGadget.

On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:

> Hello,
>
> The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.
>
> Which system type and frequency range are you trying to find CC's using the
BC346XT?
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:
>
> > Hi Dave,
> >
> > I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..
> >
> > --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
> >
> > From: Dave Landrum <h8digitalradio@...>
> > Subject: Re: [BC346XT] Automatically search Control Channel
> > To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> > Date: Tuesday, May 3, 2011, 4:58 PM
> >
> >
> >
> > Hello,
> >
> > Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
> >
> > 73
> >
> > Dave L.
> >
> > Sent from an Apple iGadget.
> >
> > On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
> >
> > > Dear group,
> >
> > >
> >
> > > Anyone know how to automatically search for control channel ?
> >
> > > the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=
> >
> > >
> >
> > > Regards,
> >
> > > Arif
> >
> > >
> >
> > > [Non-text portions of this message have been removed]
> >
> > >
> >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

Hello,

The scanner wasn't designed for P25 Systems. It does not have P25 Hardware.
However, the BC346XT is a good feature rich Analog Only scanner.

If you need P25, the BCD396XT is a good choice.

73

Dave L.

Sent from an Apple iGadget.


On May 3, 2011, at 12:05, Bob Havenga <flightresq@...> wrote:

> it's toobad bearcat cant update the software so the scanner would do this.
>
> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>
> From: Dave Landrum <h8digitalradio@...>
> Subject: Re: [BC346XT] Automatically search Control Channel
> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> Date: Tuesday, May 3, 2011, 10:27 AM
>
>
>
> Hello,
>
> Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:
>
> > Hello,
> >
> > The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.
> >
> > Which system type and frequency range are you trying to find CC's using the
BC346XT?
> >
> > 73
> >
> > Dave L.
> >
> > Sent from an Apple iGadget.
> >
> > On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:
> >
> > > Hi Dave,
> > >
> > > I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..
> > >
> > > --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
> > >
> > > From: Dave Landrum <h8digitalradio@...>
> > > Subject: Re: [BC346XT] Automatically search Control Channel
> > > To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> > > Date: Tuesday, May 3, 2011, 4:58 PM
> > >
> > >
> > >
> > > Hello,
> > >
> > > Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
> > >
> > > 73
> > >
> > > Dave L.
> > >
> > > Sent from an Apple iGadget.
> > >
> > > On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
> > >
> > > > Dear group,
> > >
> > > >
> > >
> > > > Anyone know how to automatically search for control channel ?
> > >
> > > > the only way i know is using custom search , then press hold and tune
for the control channel one by one =_=
> > >
> > > >
> > >
> > > > Regards,
> > >
> > > > Arif
> > >
> > > >
> > >
> > > > [Non-text portions of this message have been removed]
> > >
> > > >
> > >
> > > >
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> >
> > [Non-text portions of this message have been removed]
> >
> >
>
> [Non-text portions of this message have been removed]
>
> [Non-text portions of this message have been removed]
>
>


[Non-text portions of this message have been removed]

Hi Dave,

I am trying to find CC for 800-900 MHz, the system is unknown yet.
The problem is the custom search keep on searching..

--- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:

From: Dave Landrum <h8digitalradio@...>
Subject: Re: [BC346XT] Automatically search Control Channel
To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
Date: Tuesday, May 3, 2011, 10:27 PM
















 









       Hello,



Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.



73



Dave L.



Sent from an Apple iGadget.



On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:



> Hello,

>

> The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.

>

> Which system type and frequency range are you trying to find CC's using the
BC346XT?

>

> 73

>

> Dave L.

>

> Sent from an Apple iGadget.

>

> On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:

>

> > Hi Dave,

> >

> > I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..

> >

> > --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:

> >

> > From: Dave Landrum <h8digitalradio@...>

> > Subject: Re: [BC346XT] Automatically search Control Channel

> > To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>

> > Date: Tuesday, May 3, 2011, 4:58 PM

> >

> >

> >

> > Hello,

> >

> > Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.

> >

> > 73

> >

> > Dave L.

> >

> > Sent from an Apple iGadget.

> >

> > On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:

> >

> > > Dear group,

> >

> > >

> >

> > > Anyone know how to automatically search for control channel ?

> >

> > > the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=

> >

> > >

> >

> > > Regards,

> >

> > > Arif

> >

> > >

> >

> > > [Non-text portions of this message have been removed]

> >

> > >

> >

> > >

> >

> > [Non-text portions of this message have been removed]

> >

> > [Non-text portions of this message have been removed]

> >

> >

>

> [Non-text portions of this message have been removed]

>

>



[Non-text portions of this message have been removed]



























[Non-text portions of this message have been removed]

That's what the BCD396XT is for. It's essentially a P25-capable 346.

Joe M.

Bob Havenga wrote:
> it's toobad bearcat cant update the software so the scanner would do this.
>
> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>
>
> From: Dave Landrum <h8digitalradio@...>
> Subject: Re: [BC346XT] Automatically search Control Channel
> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> Date: Tuesday, May 3, 2011, 10:27 AM
>
>
>
>
>
>
> Hello,
>
> Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:
>
>> Hello,
>>
>> The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.
>>
>> Which system type and frequency range are you trying to find CC's using the
BC346XT?
>>
>> 73
>>
>> Dave L.
>>
>> Sent from an Apple iGadget.
>>
>> On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:
>>
>>> Hi Dave,
>>>
>>> I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..
>>>
>>> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>>>
>>> From: Dave Landrum <h8digitalradio@...>
>>> Subject: Re: [BC346XT] Automatically search Control Channel
>>> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
>>> Date: Tuesday, May 3, 2011, 4:58 PM
>>>
>>>
>>>
>>> Hello,
>>>
>>> Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
>>>
>>> 73
>>>
>>> Dave L.
>>>
>>> Sent from an Apple iGadget.
>>>
>>> On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
>>>
>>>> Dear group,
>>>> Anyone know how to automatically search for control channel ?
>>>> the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=
>>>> Regards,
>>>> Arif
>>>> [Non-text portions of this message have been removed]
>>> [Non-text portions of this message have been removed]
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>> [Non-text portions of this message have been removed]
>>
>>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

i will consider this scanner maybe down the road, right now I don't this.

--- On Tue, 5/3/11, MCH <mch@...> wrote:


From: MCH <mch@...>
Subject: Re: [BC346XT] Automatically search Control Channel
To: BC346XT@yahoogroups.com
Date: Tuesday, May 3, 2011, 9:53 PM


 



That's what the BCD396XT is for. It's essentially a P25-capable 346.

Joe M.

Bob Havenga wrote:
> it's toobad bearcat cant update the software so the scanner would do this.
>
> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>
>
> From: Dave Landrum <h8digitalradio@...>
> Subject: Re: [BC346XT] Automatically search Control Channel
> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> Date: Tuesday, May 3, 2011, 10:27 AM
>
>
>
>
>
>
> Hello,
>
> Slight correction. The BC346XT cannot trunk P25 systems. It is not capable.
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 11:24, Dave Landrum <h8digitalradio@...> wrote:
>
>> Hello,
>>
>> The CC Only Custom Search only can TrunkTrack MOT 800 MHz P16 or any P25
System in any Frequency Range or LTR. It can find, but not Trunk VHF/UHF P16 MOT
Systems, or Rebanded 800 MHz P16 3600 Baud Systems. You can set a custom
bandplan for these type of systems. EDACS CC's can be found, but not trunked.
>>
>> Which system type and frequency range are you trying to find CC's using the
BC346XT?
>>
>> 73
>>
>> Dave L.
>>
>> Sent from an Apple iGadget.
>>
>> On May 3, 2011, at 6:49, Arif Aulia <chimeira83@...> wrote:
>>
>>> Hi Dave,
>>>
>>> I have tried it, but seems the custom search cannot find the CC and stop,
the custom search just keep on searching so i have to put it on hold and tune it
manually..
>>>
>>> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>>>
>>> From: Dave Landrum <h8digitalradio@...>
>>> Subject: Re: [BC346XT] Automatically search Control Channel
>>> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
>>> Date: Tuesday, May 3, 2011, 4:58 PM
>>>
>>>
>>>
>>> Hello,
>>>
>>> Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
>>>
>>> 73
>>>
>>> Dave L.
>>>
>>> Sent from an Apple iGadget.
>>>
>>> On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
>>>
>>>> Dear group,
>>>> Anyone know how to automatically search for control channel ?
>>>> the only way i know is using custom search , then press hold and tune for
the control channel one by one =_=
>>>> Regards,
>>>> Arif
>>>> [Non-text portions of this message have been removed]
>>> [Non-text portions of this message have been removed]
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>> [Non-text portions of this message have been removed]
>>
>>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>







[Non-text portions of this message have been removed]

what type of soft ware can any suggest? I would like to monitor local fd's that
use digital 800 mhz. Will the bct 346 be able to monitor these channels? They
are not sc 21. It would be nice to see what is going on without hearing the
actual communicatins.

--- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:


From: Dave Landrum <h8digitalradio@...>
Subject: Re: [BC346XT] Automatically search Control Channel
To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
Date: Tuesday, May 3, 2011, 4:58 AM


 



Hello,

Set a custom search range. From the custom search options menu, select CC Only.
With CC Only enabled, the scanner only stops on Control Channels, and will trunk
and follow TG's from the CC found.

73

Dave L.

Sent from an Apple iGadget.

On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:

> Dear group,
>
> Anyone know how to automatically search for control channel ?
> the only way i know is using custom search , then press hold and tune for the
control channel one by one =_=
>
> Regards,
> Arif
>
> [Non-text portions of this message have been removed]
>
>

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

Depends on the digital type. You would have to
be more specific to get an accurate answer.

Joe M.

Bob Havenga wrote:
> what type of soft ware can any suggest? I would like to monitor local fd's
that use digital 800 mhz. Will the bct 346 be able to monitor these channels?
They are not sc 21. It would be nice to see what is going on without hearing the
actual communicatins.
>
> --- On Tue, 5/3/11, Dave Landrum <h8digitalradio@...> wrote:
>
>
> From: Dave Landrum <h8digitalradio@...>
> Subject: Re: [BC346XT] Automatically search Control Channel
> To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> Date: Tuesday, May 3, 2011, 4:58 AM
>
>
>
>
>
>
> Hello,
>
> Set a custom search range. From the custom search options menu, select CC
Only. With CC Only enabled, the scanner only stops on Control Channels, and will
trunk and follow TG's from the CC found.
>
> 73
>
> Dave L.
>
> Sent from an Apple iGadget.
>
> On May 3, 2011, at 5:15, Arif Aulia <chimeira83@...> wrote:
>
>> Dear group,
>>
>> Anyone know how to automatically search for control channel ?
>> the only way i know is using custom search , then press hold and tune for the
control channel one by one =_=
>>
>> Regards,
>> Arif
>>
>> [Non-text portions of this message have been removed]
>>
>>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

I would like to use a lapel speaker but the audio for the earphone out jack is
attenuated. Can anyone help me with this?

Check out the SpectrumForce Scanner Lapel Speaker with Antenna Mount (SMA
connection) from ScannerMaster. When you connect the antenna cable to the
scanner, the internal scanner audio resistance to the earphone jack is
cancelled.

--- On Tue, 5/17/11, davidbrass@... <davidbrass@...>
wrote:


From: davidbrass@... <davidbrass@...>
Subject: [BC346XT] Earphone out jack
To: BC346XT@yahoogroups.com
Date: Tuesday, May 17, 2011, 7:21 AM


I would like to use a lapel speaker but the audio for the earphone out jack is
attenuated. Can anyone help me with this?



------------------------------------

Yahoo! Groups Links





[Non-text portions of this message have been removed]

     Thank you very much. I appreciate the help.


From: MICHAEL RINGER <ringerm@...>
To: BC346XT@yahoogroups.com
Sent: Tuesday, May 17, 2011 4:13 PM
Subject: Re: [BC346XT] Earphone out jack


   

Check out the SpectrumForce Scanner Lapel Speaker with Antenna Mount (SMA
connection) from ScannerMaster. When you connect the antenna cable to the
scanner, the internal scanner audio resistance to the earphone jack is
cancelled.

--- On Tue, 5/17/11, davidbrass@... <davidbrass@...>
wrote:

From: davidbrass@... <davidbrass@...>
Subject: [BC346XT] Earphone out jack
To: BC346XT@yahoogroups.com
Date: Tuesday, May 17, 2011, 7:21 AM

I would like to use a lapel speaker but the audio for the earphone out jack is
attenuated. Can anyone help me with this?

------------------------------------

Yahoo! Groups Links

[Non-text portions of this message have been removed]




[Non-text portions of this message have been removed]

It's an earphone jack, not an external speaker jack. Use an earphone
(wired or wireless) or use an amplified speaker.

I suppose you could rewire the jack to the speaker to get full audio output.

Joe M.

davidbrass@... wrote:
> I would like to use a lapel speaker but the audio for the earphone out jack is
attenuated. Can anyone help me with this?

Thanks Joe,
 
          But, I was referred to a lapel speaker on scanner master with
an antenna jack that cancels out the attenuation. It connects the speaker ground
to the antenna ground and bypasses it.
 
Regards,
 
David

From: MCH <mch@...>
To: BC346XT@yahoogroups.com
Sent: Tuesday, May 17, 2011 6:00 PM
Subject: Re: [BC346XT] Earphone out jack


   

It's an earphone jack, not an external speaker jack. Use an earphone
(wired or wireless) or use an amplified speaker.

I suppose you could rewire the jack to the speaker to get full audio output.

Joe M.

davidbrass@... wrote:
> I would like to use a lapel speaker but the audio for the earphone out jack is
attenuated. Can anyone help me with this?



[Non-text portions of this message have been removed]

How do I set up a particular frequency as a priority?

Use this link
http://marksscanners.com/346XT/346xt.shtml

--- On Mon, 5/30/11, exhogger <dean.purcell@...> wrote:


From: exhogger <dean.purcell@...>
Subject: [BC346XT] priority scan
To: BC346XT@yahoogroups.com
Date: Monday, May 30, 2011, 9:33 AM


 



How do I set up a particular frequency as a priority?








[Non-text portions of this message have been removed]

Hi guys!

I have my BC346 on scan, and its only holding on one system. Any ideas how to
have it scan all of my systems in the scanner instead of one? I have to hit
function to switch it to another, but then it doesn't move again...

Any help would be much appreciated!!

Shane

Its in the "Hold on a system" ,hold down the "Hold" button til i think it beeps
and will scan all systems......

--- In BC346XT@yahoogroups.com, "shane" <shane.murphy@...> wrote:
>
> Hi guys!
>
> I have my BC346 on scan, and its only holding on one system. Any ideas how to
have it scan all of my systems in the scanner instead of one? I have to hit
function to switch it to another, but then it doesn't move again...
>
> Any help would be much appreciated!!
>
> Shane
>

--- In BC346XT@yahoogroups.com, "exhogger" <dean.purcell@...> wrote:
>
> How do I set up a particular frequency as a priority?
>

Thanks for the link. What a great manual!!

The manual is great.

--- On Tue, 5/31/11, exhogger <dean.purcell@...> wrote:


From: exhogger <dean.purcell@...>
Subject: [BC346XT] Re: priority scan
To: BC346XT@yahoogroups.com
Date: Tuesday, May 31, 2011, 11:02 AM


 





--- In BC346XT@yahoogroups.com, "exhogger" <dean.purcell@...> wrote:
>
> How do I set up a particular frequency as a priority?
>

Thanks for the link. What a great manual!!








[Non-text portions of this message have been removed]

Anybody know of a manual for the 346? I can't make any sense of the stupid disc
that came with the radio! Also,if anyone lives in the Boston-Quincy-Milton area
and knows how to use this radio I would love to hear from them. I only want to
have one conventional systsem.         Thanks in advance, Paul. 

[Non-text portions of this message have been removed]

Go to marksscanners.com for the online manual. It is very thurough.

--- On Thu, 6/2/11, PAUL DAVIS <paultd@...> wrote:


From: PAUL DAVIS <paultd@...>
Subject: [BC346XT] Re: Manual
To: BC346XT@yahoogroups.com
Date: Thursday, June 2, 2011, 3:35 AM


 



Anybody know of a manual for the 346? I can't make any sense of the stupid disc
that came with the radio! Also,if anyone lives in the Boston-Quincy-Milton area
and knows how to use this radio I would love to hear from them. I only want to
have one conventional systsem.         Thanks in advance, Paul. 

[Non-text portions of this message have been removed]








[Non-text portions of this message have been removed]

Paul, I had the same problem when i got my scanner and i found this after market
manual that is great. Here is the link to it and where you can buy it at. Its
well worth the money.
<http://www.scannermaster.com/Easier_to_Read_Uniden_XT_Scanner_Manual_p/47-51155\
4.htm>
Hope that helps you.

Glenn



--- In BC346XT@yahoogroups.com, PAUL DAVIS <paultd@...> wrote:
>
> Anybody know of a manual for the 346? I can't make any sense of the stupid
disc that came with the radio! Also,if anyone lives in the Boston-Quincy-Milton
area and knows how to use this radio I would love to hear from them. I only want
to have one conventional systsem.         Thanks in advance, Paul. 
>
> [Non-text portions of this message have been removed]
>

I tried to search this down from the historic posts but had no luck. I'm not
seeing the behavior I was expecting with my 346 on trunked systems.
Specifically...

System: Mass State Police, Moto end code checked, Decimal ID format, ID Mode
(see below), Tape out: off, No XT Options set.

Sites: 14 of them set up... only control channels entered, selected from the MSP
page on RadioReference.com. In Freescan, APCO mode set to AUTO, Threshold 8,
Moto 800 Standard Type 2, Modulation Auto, CC ONLY checked.

Groups: 8 set up. Number of channels varies per Group. Display filled in for all
cases, TGID set all cases as decimal number (All sites and groups are pasted
from RR). No L/O, No Pri, Audio type set to ALL.

Problems

1. ZERO results when I am in SCAN mode (unexpected). In SEARCH mode, I see both
the TGID's I have programmed in as well as others I had not programmed
(expected).

2. I never ever see the alpha tags that have been entered for any of the groups.
It only shows TGID's and Unit ID's. I have verified that many of the TIGD's I
see in the Free Scan search log are indeed TGID's I have programmed in (note:
these log entries are from hits that only took place in SEARCH mode… never any
hits in SCAN).

Any suggestions for either? Thanks in advance.

Mike

I believe Mass State Police is a rebanded system, so it needs to be programmed
as MOT custom with the rebanded band plan.


UPMan

From: mkw400_y <mike.w.public@...>
>To: BC346XT@yahoogroups.com
>Sent: Tuesday, June 21, 2011 3:37 PM
>Subject: [BC346XT] No hits on TGID's in Scan, no alpha tags
>
>
> 
>
>I tried to search this down from the historic posts but had no luck. I'm not
seeing the behavior I was expecting with my 346 on trunked systems.
Specifically...
>
>System: Mass State Police, Moto end code checked, Decimal ID format, ID Mode
(see below), Tape out: off, No XT Options set.
>
>Sites: 14 of them set up... only control channels entered, selected from the
MSP page on RadioReference.com. In Freescan, APCO mode set to AUTO, Threshold 8,
Moto 800 Standard Type 2, Modulation Auto, CC ONLY checked.
>
>Groups: 8 set up. Number of channels varies per Group. Display filled in for
all cases, TGID set all cases as decimal number (All sites and groups are pasted
from RR). No L/O, No Pri, Audio type set to ALL.
>
>Problems
>
>1. ZERO results when I am in SCAN mode (unexpected). In SEARCH mode, I see both
the TGID's I have programmed in as well as others I had not programmed
(expected).
>
>2. I never ever see the alpha tags that have been entered for any of the
groups. It only shows TGID's and Unit ID's. I have verified that many of the
TIGD's I see in the Free Scan search log are indeed TGID's I have programmed in
(note: these log entries are from hits that only took place in SEARCH mode…
never any hits in SCAN).
>
>Any suggestions for either? Thanks in advance.
>
>Mike
>
>
>
>
>

[Non-text portions of this message have been removed]

However, from your terminology it sounds like you are using software to program
(which software?).
 
If you are receiving something either the software correctly set the sites for
rebanding or at least one of the sites you entered hasn't rebanded, yet.
 
They symptoms sound like you've not set the TGID correctly. Maybe the TGID field
has a space or other extra character that is hosing the xfer.

UPMan

From: Uniden UPMan <uniden.upman@...>
>To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
>Sent: Tuesday, June 21, 2011 3:57 PM
>Subject: Re: [BC346XT] No hits on TGID's in Scan, no alpha tags
>
>
> 
>I believe Mass State Police is a rebanded system, so it needs to be programmed
as MOT custom with the rebanded band plan.
>
>UPMan
>
>From: mkw400_y <mike.w.public@...>
>>To: BC346XT@yahoogroups.com
>>Sent: Tuesday, June 21, 2011 3:37 PM
>>Subject: [BC346XT] No hits on TGID's in Scan, no alpha tags
>>
>>
>> 
>>
>>I tried to search this down from the historic posts but had no luck. I'm not
seeing the behavior I was expecting with my 346 on trunked systems.
Specifically...
>>
>>System: Mass State Police, Moto end code checked, Decimal ID format, ID Mode
(see below), Tape out: off, No XT Options set.
>>
>>Sites: 14 of them set up... only control channels entered, selected from the
MSP page on RadioReference.com. In Freescan, APCO mode set to AUTO, Threshold 8,
Moto 800 Standard Type 2, Modulation Auto, CC ONLY checked.
>>
>>Groups: 8 set up. Number of channels varies per Group. Display filled in for
all cases, TGID set all cases as decimal number (All sites and groups are pasted
from RR). No L/O, No Pri, Audio type set to ALL.
>>
>>Problems
>>
>>1. ZERO results when I am in SCAN mode (unexpected). In SEARCH mode, I see
both the TGID's I have programmed in as well as others I had not programmed
(expected).
>>
>>2. I never ever see the alpha tags that have been entered for any of the
groups. It only shows TGID's and Unit ID's. I have verified that many of the
TIGD's I see in the Free Scan search log are indeed TGID's I have programmed in
(note: these log entries are from hits that only took place in SEARCH mode…
never any hits in SCAN).
>>
>>Any suggestions for either? Thanks in advance.
>>
>>Mike
>>
>>
>>
>>
>>
>
>[Non-text portions of this message have been removed]
>
>
>
>
>

[Non-text portions of this message have been removed]

Hi and thank you for your help. I'm using FreeSCAN for my software. I did check
for extra characters (great idea)... thanks. No issues there. Bad news about the
rebanding... I've tried to understand that and band plans with no luck (is that
the same as a fleet map?). Would this problem(s) be something that has been
solved somewhere on the web... some link perhaps? I really have tried to
understand the banding things though I had not associated that with this
problem. Either way, thank you.

Mike

--- In BC346XT@yahoogroups.com, Uniden UPMan <uniden.upman@...> wrote:
>
> However, from your terminology it sounds like you are using software to
program (which software?).
>  
> If you are receiving something either the software correctly set the sites for
rebanding or at least one of the sites you entered hasn't rebanded, yet.
>  
> They symptoms sound like you've not set the TGID correctly. Maybe the TGID
field has a space or other extra character that is hosing the xfer.
>
> UPMan
>
> From: Uniden UPMan <uniden.upman@...>
> >To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
> >Sent: Tuesday, June 21, 2011 3:57 PM
> >Subject: Re: [BC346XT] No hits on TGID's in Scan, no alpha tags
> >
> >
> > 
> >I believe Mass State Police is a rebanded system, so it needs to be
programmed as MOT custom with the rebanded band plan.
> >
> >UPMan
> >
> >From: mkw400_y <mike.w.public@...>
> >>To: BC346XT@yahoogroups.com
> >>Sent: Tuesday, June 21, 2011 3:37 PM
> >>Subject: [BC346XT] No hits on TGID's in Scan, no alpha tags
> >>
> >>
> >> 
> >>
> >>I tried to search this down from the historic posts but had no luck. I'm not
seeing the behavior I was expecting with my 346 on trunked systems.
Specifically...
> >>
> >>System: Mass State Police, Moto end code checked, Decimal ID format, ID Mode
(see below), Tape out: off, No XT Options set.
> >>
> >>Sites: 14 of them set up... only control channels entered, selected from the
MSP page on RadioReference.com. In Freescan, APCO mode set to AUTO, Threshold 8,
Moto 800 Standard Type 2, Modulation Auto, CC ONLY checked.
> >>
> >>Groups: 8 set up. Number of channels varies per Group. Display filled in for
all cases, TGID set all cases as decimal number (All sites and groups are pasted
from RR). No L/O, No Pri, Audio type set to ALL.
> >>
> >>Problems
> >>
> >>1. ZERO results when I am in SCAN mode (unexpected). In SEARCH mode, I see
both the TGID's I have programmed in as well as others I had not programmed
(expected).
> >>
> >>2. I never ever see the alpha tags that have been entered for any of the
groups. It only shows TGID's and Unit ID's. I have verified that many of the
TIGD's I see in the Free Scan search log are indeed TGID's I have programmed in
(note: these log entries are from hits that only took place in SEARCH mode…
never any hits in SCAN).
> >>
> >>Any suggestions for either? Thanks in advance.
> >>
> >>Mike
> >>
> >>
> >>
> >>
> >>
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>

General info on rebanding: http://wiki.radioreference.com/index.php/Rebanding
 
Specific info on entering the custom rebanding band plan (which is not the same
as a fleet map):
http://info.uniden.com/twiki/bin/view/UnidenMan4/EditBandPlan#Rebanded_Motorola_\
Systems

UPMan

From: mkw400_y <mike.w.public@...>
>To: BC346XT@yahoogroups.com
>Sent: Tuesday, June 21, 2011 7:24 PM
>Subject: [BC346XT] Re: No hits on TGID's in Scan, no alpha tags
>
>
> 
>
>
>Hi and thank you for your help. I'm using FreeSCAN for my software. I did check
for extra characters (great idea)... thanks. No issues there. Bad news about the
rebanding... I've tried to understand that and band plans with no luck (is that
the same as a fleet map?). Would this problem(s) be something that has been
solved somewhere on the web... some link perhaps? I really have tried to
understand the banding things though I had not associated that with this
problem. Either way, thank you.
>
>Mike
>
>--- In BC346XT@yahoogroups.com, Uniden UPMan <uniden.upman@...> wrote:
>>
>> However, from your terminology it sounds like you are using software to
program (which software?).
>>  
>> If you are receiving something either the software correctly set the sites
for rebanding or at least one of the sites you entered hasn't rebanded, yet.
>>  
>> They symptoms sound like you've not set the TGID correctly. Maybe the TGID
field has a space or other extra character that is hosing the xfer.
>>
>> UPMan
>>
>> From: Uniden UPMan <uniden.upman@...>
>> >To: "BC346XT@yahoogroups.com" <BC346XT@yahoogroups.com>
>> >Sent: Tuesday, June 21, 2011 3:57 PM
>> >Subject: Re: [BC346XT] No hits on TGID's in Scan, no alpha tags
>> >
>> >
>> > 
>> >I believe Mass State Police is a rebanded system, so it needs to be
programmed as MOT custom with the rebanded band plan.
>> >
>> >UPMan
>> >
>> >From: mkw400_y <mike.w.public@...>
>> >>To: BC346XT@yahoogroups.com
>> >>Sent: Tuesday, June 21, 2011 3:37 PM
>> >>Subject: [BC346XT] No hits on TGID's in Scan, no alpha tags
>> >>
>> >>
>> >> 
>> >>
>> >>I tried to search this down from the historic posts but had no luck. I'm
not seeing the behavior I was expecting with my 346 on trunked systems.
Specifically...
>> >>
>> >>System: Mass State Police, Moto end code checked, Decimal ID format, ID
Mode (see below), Tape out: off, No XT Options set.
>> >>
>> >>Sites: 14 of them set up... only control channels entered, selected from
the MSP page on RadioReference.com. In Freescan, APCO mode set to AUTO,
Threshold 8, Moto 800 Standard Type 2, Modulation Auto, CC ONLY checked.
>> >>
>> >>Groups: 8 set up. Number of channels varies per Group. Display filled in
for all cases, TGID set all cases as decimal number (All sites and groups are
pasted from RR). No L/O, No Pri, Audio type set to ALL.
>> >>
>> >>Problems
>> >>
>> >>1. ZERO results when I am in SCAN mode (unexpected). In SEARCH mode, I see
both the TGID's I have programmed in as well as others I had not programmed
(expected).
>> >>
>> >>2. I never ever see the alpha tags that have been entered for any of the
groups. It only shows TGID's and Unit ID's. I have verified that many of the
TIGD's I see in the Free Scan search log are indeed TGID's I have programmed in
(note: these log entries are from hits that only took place in SEARCH
mode… never any hits in SCAN).
>> >>
>> >>Any suggestions for either? Thanks in advance.
>> >>
>> >>Mike
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>> >[Non-text portions of this message have been removed]
>> >
>> >
>> >
>> >
>> >
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
>

[Non-text portions of this message have been removed]