In case anyone is in need of a Maha Charger, the MH-C800S charges 1 to 8 AA/AAA
batteries and is on sale, normally $69.99 for $39.99

Go to:

http://tinyurl.com/22sz8t8

and search for
MH-C800S

ML

[Non-text portions of this message have been removed]

The frequencies are in the 800Mhz trunked Motorola range. When it "hangs" it's
as if some user has an open keyed up mic. There's a soft hissing in the
background.

Squelch is set at 2, I've played with that setting to see if it has any effect..
no, it doesn't stop the "hanging".
When the antenas are disconected it does not hang up an any channels.
Reception is very poor and choppy since the hanging issue began, they're
related
I'm sure. I live in a major metro area and reception has always been strong.
I just turned on the scanner and recieved nothing for a few moments then some
brief choppy conversation at 858.2625 then it hangs on that channel, no more
scanning just hanging.

I really hope my scanner is not dead but it's looking grim.




________________________________
From: MCH <mch@...>
To: BC346XT@yahoogroups.com
Sent: Sat, January 8, 2011 9:40:18 PM
Subject: Re: [BC346XT] Hanging issue

 
What are some of the frequencies involved?

What is your exact squelch setting?

Does it do this without the antenna connected?

Joe M.

boinc99@... wrote:
> My 346XT has recently started hanging up on channels when scanning. I
> have checked everything I can think of, squelch, attenuator etc, even
> rebooted the scanner several times and still, it is hanging up on some
> channels when I'm in scan mode. Yes, I've locked those channels when it
> happens and it just finds another channel to hang up on; it's very
> annoying. It's as if I've turned on "hold". Can anyone suggest how to
> fix this? Please help!
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ----------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>02:33:00
>






[Non-text portions of this message have been removed]

We've had a similar problem here in CT on several of the CSP sites. It's
almost as if there is a low level carrier holding the squelch open following
a transmission. Found that we needed to enable the End-code detection or
perhaps disable it, I forget,

doc

----- Original Message -----
From: "Gus Oliver Davis" <boinc99@...>
To: <BC346XT@yahoogroups.com>
Sent: Monday, January 10, 2011 12:47 PM
Subject: Re: [BC346XT] Hanging issue


The frequencies are in the 800Mhz trunked Motorola range. When it "hangs"
it's
as if some user has an open keyed up mic. There's a soft hissing in the
background.

Squelch is set at 2, I've played with that setting to see if it has any
effect..
no, it doesn't stop the "hanging".
When the antenas are disconected it does not hang up an any channels.
Reception is very poor and choppy since the hanging issue began, they're
related
I'm sure. I live in a major metro area and reception has always been strong.
I just turned on the scanner and recieved nothing for a few moments then
some
brief choppy conversation at 858.2625 then it hangs on that channel, no more
scanning just hanging.

I really hope my scanner is not dead but it's looking grim.




________________________________
From: MCH <mch@...>
To: BC346XT@yahoogroups.com
Sent: Sat, January 8, 2011 9:40:18 PM
Subject: Re: [BC346XT] Hanging issue


What are some of the frequencies involved?

What is your exact squelch setting?

Does it do this without the antenna connected?

Joe M.

boinc99@... wrote:
> My 346XT has recently started hanging up on channels when scanning. I
> have checked everything I can think of, squelch, attenuator etc, even
> rebooted the scanner several times and still, it is hanging up on some
> channels when I'm in scan mode. Yes, I've locked those channels when it
> happens and it just finds another channel to hang up on; it's very
> annoying. It's as if I've turned on "hold". Can anyone suggest how to
> fix this? Please help!
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ----------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>02:33:00
>






[Non-text portions of this message have been removed]



------------------------------------

Yahoo! Groups Links

It definitely sounds like you have a technical issue that needs
addressed. Simply hanging can be many causes but hanging combined with
lack of reception leads me to think it's an issue that needs addressed
by a service shop - perhaps related to the CPU malfunctioning.

Joe M.

Gus Oliver Davis wrote:
> The frequencies are in the 800Mhz trunked Motorola range. When it "hangs" it's
> as if some user has an open keyed up mic. There's a soft hissing in the
> background.
>
> Squelch is set at 2, I've played with that setting to see if it has any
effect..
> no, it doesn't stop the "hanging".
> When the antenas are disconected it does not hang up an any channels.
> Reception is very poor and choppy since the hanging issue began, they're
related
> I'm sure. I live in a major metro area and reception has always been strong.
> I just turned on the scanner and recieved nothing for a few moments then some
> brief choppy conversation at 858.2625 then it hangs on that channel, no more
> scanning just hanging.
>
> I really hope my scanner is not dead but it's looking grim.
>
>
>
>
> ________________________________
> From: MCH <mch@...>
> To: BC346XT@yahoogroups.com
> Sent: Sat, January 8, 2011 9:40:18 PM
> Subject: Re: [BC346XT] Hanging issue
>
>
> What are some of the frequencies involved?
>
> What is your exact squelch setting?
>
> Does it do this without the antenna connected?
>
> Joe M.
>
> boinc99@... wrote:
>> My 346XT has recently started hanging up on channels when scanning. I
>> have checked everything I can think of, squelch, attenuator etc, even
>> rebooted the scanner several times and still, it is hanging up on some
>> channels when I'm in scan mode. Yes, I've locked those channels when it
>> happens and it just finds another channel to hang up on; it's very
>> annoying. It's as if I've turned on "hold". Can anyone suggest how to
>> fix this? Please help!
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>> ----------------------------------------------------------
>>
>>
>> Internal Virus Database is out of date.
>> Checked by AVG - www.avg.com
>> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>> 02:33:00
>>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
02:33:00
>

It would have been: Enable end code detection.

But in your case there wasn't the concurrent lack of reception, was
there? (I'm assuming he was talking about lack of reception on the
normal frequencies, and not just in general)

Joe M.

Mark Levine, D.C. wrote:
> We've had a similar problem here in CT on several of the CSP sites. It's
> almost as if there is a low level carrier holding the squelch open following
> a transmission. Found that we needed to enable the End-code detection or
> perhaps disable it, I forget,
>
> doc
>
> ----- Original Message -----
> From: "Gus Oliver Davis" <boinc99@...>
> To: <BC346XT@yahoogroups.com>
> Sent: Monday, January 10, 2011 12:47 PM
> Subject: Re: [BC346XT] Hanging issue
>
>
> The frequencies are in the 800Mhz trunked Motorola range. When it "hangs"
> it's
> as if some user has an open keyed up mic. There's a soft hissing in the
> background.
>
> Squelch is set at 2, I've played with that setting to see if it has any
> effect..
> no, it doesn't stop the "hanging".
> When the antenas are disconected it does not hang up an any channels.
> Reception is very poor and choppy since the hanging issue began, they're
> related
> I'm sure. I live in a major metro area and reception has always been strong.
> I just turned on the scanner and recieved nothing for a few moments then
> some
> brief choppy conversation at 858.2625 then it hangs on that channel, no more
> scanning just hanging.
>
> I really hope my scanner is not dead but it's looking grim.
>
>
>
>
> ________________________________
> From: MCH <mch@...>
> To: BC346XT@yahoogroups.com
> Sent: Sat, January 8, 2011 9:40:18 PM
> Subject: Re: [BC346XT] Hanging issue
>
>
> What are some of the frequencies involved?
>
> What is your exact squelch setting?
>
> Does it do this without the antenna connected?
>
> Joe M.
>
> boinc99@... wrote:
>> My 346XT has recently started hanging up on channels when scanning. I
>> have checked everything I can think of, squelch, attenuator etc, even
>> rebooted the scanner several times and still, it is hanging up on some
>> channels when I'm in scan mode. Yes, I've locked those channels when it
>> happens and it just finds another channel to hang up on; it's very
>> annoying. It's as if I've turned on "hold". Can anyone suggest how to
>> fix this? Please help!
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>> ----------------------------------------------------------
>>
>>
>> Internal Virus Database is out of date.
>> Checked by AVG - www.avg.com
>> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>> 02:33:00
>>
>
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

No the low level carrier would hang the scanner on the voice channel and
lose the CC. When locked on the low level carrier, the unit would not resume
unless done manually. If it was a busy site, random TG's would come through.

Only Uniden's were affected as far as I could tell from our CT group. GRE's
didn't seem sensitive to this issue. The carrier was always on the same site
and received at about 1/2 or less signal strength than the regular signal or
when a TG would come on.


----- Original Message -----
From: "MCH" <mch@...>
To: <BC346XT@yahoogroups.com>
Sent: Monday, January 10, 2011 3:28 PM
Subject: Re: [BC346XT] Hanging issue


> It would have been: Enable end code detection.
>
> But in your case there wasn't the concurrent lack of reception, was
> there? (I'm assuming he was talking about lack of reception on the
> normal frequencies, and not just in general)
>
> Joe M.
>
> Mark Levine, D.C. wrote:
>> We've had a similar problem here in CT on several of the CSP sites. It's
>> almost as if there is a low level carrier holding the squelch open
>> following
>> a transmission. Found that we needed to enable the End-code detection or
>> perhaps disable it, I forget,
>>
>> doc
>>
>> ----- Original Message -----
>> From: "Gus Oliver Davis" <boinc99@...>
>> To: <BC346XT@yahoogroups.com>
>> Sent: Monday, January 10, 2011 12:47 PM
>> Subject: Re: [BC346XT] Hanging issue
>>
>>
>> The frequencies are in the 800Mhz trunked Motorola range. When it "hangs"
>> it's
>> as if some user has an open keyed up mic. There's a soft hissing in the
>> background.
>>
>> Squelch is set at 2, I've played with that setting to see if it has any
>> effect..
>> no, it doesn't stop the "hanging".
>> When the antenas are disconected it does not hang up an any channels.
>> Reception is very poor and choppy since the hanging issue began, they're
>> related
>> I'm sure. I live in a major metro area and reception has always been
>> strong.
>> I just turned on the scanner and recieved nothing for a few moments then
>> some
>> brief choppy conversation at 858.2625 then it hangs on that channel, no
>> more
>> scanning just hanging.
>>
>> I really hope my scanner is not dead but it's looking grim.
>>
>>
>>
>>
>> ________________________________
>> From: MCH <mch@...>
>> To: BC346XT@yahoogroups.com
>> Sent: Sat, January 8, 2011 9:40:18 PM
>> Subject: Re: [BC346XT] Hanging issue
>>
>>
>> What are some of the frequencies involved?
>>
>> What is your exact squelch setting?
>>
>> Does it do this without the antenna connected?
>>
>> Joe M.
>>
>> boinc99@... wrote:
>>> My 346XT has recently started hanging up on channels when scanning. I
>>> have checked everything I can think of, squelch, attenuator etc, even
>>> rebooted the scanner several times and still, it is hanging up on some
>>> channels when I'm in scan mode. Yes, I've locked those channels when it
>>> happens and it just finds another channel to hang up on; it's very
>>> annoying. It's as if I've turned on "hold". Can anyone suggest how to
>>> fix this? Please help!
>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>> ----------------------------------------------------------
>>>
>>>
>>> Internal Virus Database is out of date.
>>> Checked by AVG - www.avg.com
>>> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>>> 02:33:00
>>>
>>
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Did they ever fix that transmitter?

Joe M.

Mark Levine, D.C. wrote:
> No the low level carrier would hang the scanner on the voice channel and
> lose the CC. When locked on the low level carrier, the unit would not resume
> unless done manually. If it was a busy site, random TG's would come through.
>
> Only Uniden's were affected as far as I could tell from our CT group. GRE's
> didn't seem sensitive to this issue. The carrier was always on the same site
> and received at about 1/2 or less signal strength than the regular signal or
> when a TG would come on.
>
>
> ----- Original Message -----
> From: "MCH" <mch@...>
> To: <BC346XT@yahoogroups.com>
> Sent: Monday, January 10, 2011 3:28 PM
> Subject: Re: [BC346XT] Hanging issue
>
>
>> It would have been: Enable end code detection.
>>
>> But in your case there wasn't the concurrent lack of reception, was
>> there? (I'm assuming he was talking about lack of reception on the
>> normal frequencies, and not just in general)
>>
>> Joe M.
>>
>> Mark Levine, D.C. wrote:
>>> We've had a similar problem here in CT on several of the CSP sites. It's
>>> almost as if there is a low level carrier holding the squelch open
>>> following
>>> a transmission. Found that we needed to enable the End-code detection or
>>> perhaps disable it, I forget,
>>>
>>> doc
>>>
>>> ----- Original Message -----
>>> From: "Gus Oliver Davis" <boinc99@...>
>>> To: <BC346XT@yahoogroups.com>
>>> Sent: Monday, January 10, 2011 12:47 PM
>>> Subject: Re: [BC346XT] Hanging issue
>>>
>>>
>>> The frequencies are in the 800Mhz trunked Motorola range. When it "hangs"
>>> it's
>>> as if some user has an open keyed up mic. There's a soft hissing in the
>>> background.
>>>
>>> Squelch is set at 2, I've played with that setting to see if it has any
>>> effect..
>>> no, it doesn't stop the "hanging".
>>> When the antenas are disconected it does not hang up an any channels.
>>> Reception is very poor and choppy since the hanging issue began, they're
>>> related
>>> I'm sure. I live in a major metro area and reception has always been
>>> strong.
>>> I just turned on the scanner and recieved nothing for a few moments then
>>> some
>>> brief choppy conversation at 858.2625 then it hangs on that channel, no
>>> more
>>> scanning just hanging.
>>>
>>> I really hope my scanner is not dead but it's looking grim.
>>>
>>>
>>>
>>>
>>> ________________________________
>>> From: MCH <mch@...>
>>> To: BC346XT@yahoogroups.com
>>> Sent: Sat, January 8, 2011 9:40:18 PM
>>> Subject: Re: [BC346XT] Hanging issue
>>>
>>>
>>> What are some of the frequencies involved?
>>>
>>> What is your exact squelch setting?
>>>
>>> Does it do this without the antenna connected?
>>>
>>> Joe M.
>>>
>>> boinc99@... wrote:
>>>> My 346XT has recently started hanging up on channels when scanning. I
>>>> have checked everything I can think of, squelch, attenuator etc, even
>>>> rebooted the scanner several times and still, it is hanging up on some
>>>> channels when I'm in scan mode. Yes, I've locked those channels when it
>>>> happens and it just finds another channel to hang up on; it's very
>>>> annoying. It's as if I've turned on "hold". Can anyone suggest how to
>>>> fix this? Please help!
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------
>>>>
>>>> Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>> ----------------------------------------------------------
>>>>
>>>>
>>>> Internal Virus Database is out of date.
>>>> Checked by AVG - www.avg.com
>>>> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
>>>> 02:33:00
>>>>
>>>
>>>
>>>
>>>
>>>
>>> [Non-text portions of this message have been removed]
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

They eventually get around to it. Usually happens in the spring.


----- Original Message -----
From: "MCH" <mch@...>
To: <BC346XT@yahoogroups.com>
Sent: Monday, January 10, 2011 3:42 PM
Subject: Re: [BC346XT] Hanging issue


> Did they ever fix that transmitter?
>
> Joe M.
>
> Mark Levine, D.C. wrote:
>> No the low level carrier would hang the scanner on the voice channel and
>> lose the CC. When locked on the low level carrier, the unit would not
>> resume
>> unless done manually. If it was a busy site, random TG's would come
>> through.
>>
>> Only Uniden's were affected as far as I could tell from our CT group.
>> GRE's
>> didn't seem sensitive to this issue. The carrier was always on the same
>> site
>> and received at about 1/2 or less signal strength than the regular signal
>> or
>> when a TG would come on.
>>
>>
>> ----- Original Message -----
>> From: "MCH" <mch@...>
>> To: <BC346XT@yahoogroups.com>
>> Sent: Monday, January 10, 2011 3:28 PM
>> Subject: Re: [BC346XT] Hanging issue
>>
>>
>>> It would have been: Enable end code detection.
>>>
>>> But in your case there wasn't the concurrent lack of reception, was
>>> there? (I'm assuming he was talking about lack of reception on the
>>> normal frequencies, and not just in general)
>>>
>>> Joe M.
>>>
>>> Mark Levine, D.C. wrote:
>>>> We've had a similar problem here in CT on several of the CSP sites.
>>>> It's
>>>> almost as if there is a low level carrier holding the squelch open
>>>> following
>>>> a transmission. Found that we needed to enable the End-code detection
>>>> or
>>>> perhaps disable it, I forget,
>>>>
>>>> doc
>>>>
>>>> ----- Original Message -----
>>>> From: "Gus Oliver Davis" <boinc99@...>
>>>> To: <BC346XT@yahoogroups.com>
>>>> Sent: Monday, January 10, 2011 12:47 PM
>>>> Subject: Re: [BC346XT] Hanging issue
>>>>
>>>>
>>>> The frequencies are in the 800Mhz trunked Motorola range. When it
>>>> "hangs"
>>>> it's
>>>> as if some user has an open keyed up mic. There's a soft hissing in the
>>>> background.
>>>>
>>>> Squelch is set at 2, I've played with that setting to see if it has any
>>>> effect..
>>>> no, it doesn't stop the "hanging".
>>>> When the antenas are disconected it does not hang up an any channels.
>>>> Reception is very poor and choppy since the hanging issue began,
>>>> they're
>>>> related
>>>> I'm sure. I live in a major metro area and reception has always been
>>>> strong.
>>>> I just turned on the scanner and recieved nothing for a few moments
>>>> then
>>>> some
>>>> brief choppy conversation at 858.2625 then it hangs on that channel, no
>>>> more
>>>> scanning just hanging.
>>>>
>>>> I really hope my scanner is not dead but it's looking grim.
>>>>
>>>>
>>>>
>>>>
>>>> ________________________________
>>>> From: MCH <mch@...>
>>>> To: BC346XT@yahoogroups.com
>>>> Sent: Sat, January 8, 2011 9:40:18 PM
>>>> Subject: Re: [BC346XT] Hanging issue
>>>>
>>>>
>>>> What are some of the frequencies involved?
>>>>
>>>> What is your exact squelch setting?
>>>>
>>>> Does it do this without the antenna connected?
>>>>
>>>> Joe M.
>>>>
>>>> boinc99@... wrote:
>>>>> My 346XT has recently started hanging up on channels when scanning. I
>>>>> have checked everything I can think of, squelch, attenuator etc, even
>>>>> rebooted the scanner several times and still, it is hanging up on some
>>>>> channels when I'm in scan mode. Yes, I've locked those channels when
>>>>> it
>>>>> happens and it just finds another channel to hang up on; it's very
>>>>> annoying. It's as if I've turned on "hold". Can anyone suggest how to
>>>>> fix this? Please help!
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------
>>>>>
>>>>> Yahoo! Groups Links
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> ----------------------------------------------------------
>>>>>
>>>>>
>>>>> Internal Virus Database is out of date.
>>>>> Checked by AVG - www.avg.com
>>>>> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date:
>>>>> 03/14/10
>>>>> 02:33:00
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> [Non-text portions of this message have been removed]
>>>>
>>>>
>>>>
>>>> ------------------------------------
>>>>
>>>> Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> ------------------------------------
>>>>
>>>> Yahoo! Groups Links
>>>>
>>>>
>>>>
>>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

I'm having a problem with the backlight/power key.  Here's the repro scenario:

*Std Mot Type 2 Trunk
*Quick key #9
*TGIDs are in SCAN mode

Scenario:

I hear audio on a TGID
I press HOLD button
(Audio is coming thru)
I press BACKLIGHT/POWER button
(Backlight comes on)
(Audio cuts out briefly, lasts about 1-2 secs)
(Audio re-establishes)

Notes:

The audio cut out does not happen when scanning normally and pressing the
BACKLIGHT/POWER button

Why would pressing the BACKLIGHT/POWER button reset the audio?


-Nick

First, check to make sure you don't have Close Call, Channel Priority,
or Weather Priority enabled. The issue may not have anything to do with
the backlight.

Joe M.

nickcarr3151 wrote:
> I'm having a problem with the backlight/power key.  Here's the repro scenario:
>
> *Std Mot Type 2 Trunk
> *Quick key #9
> *TGIDs are in SCAN mode
>
> Scenario:
>
> I hear audio on a TGID
> I press HOLD button
> (Audio is coming thru)
> I press BACKLIGHT/POWER button
> (Backlight comes on)
> (Audio cuts out briefly, lasts about 1-2 secs)
> (Audio re-establishes)
>
> Notes:
>
> The audio cut out does not happen when scanning normally and pressing the
BACKLIGHT/POWER button
>
> Why would pressing the BACKLIGHT/POWER button reset the audio?
>
>
> -Nick
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
02:33:00
>

hi all,
i use freescan software for my programming. and it works great.

my question is,
    im looking to copy all the groups / systems. tgid's and frequencies over to a
memory stick/memory card. so i can print it out. anyone know how to do that. ?
thanks in advance,
keith

It's been a while since I've used freescan. but if I remember correctly, there
is a print option where you can print out quite detailed reports.

I think if you click on "file" up towards the top left part of the screen you
will see the option for print.

Hope this helps.

:~)

--- In BC346XT@yahoogroups.com, "keithf" <celticirishkeith@...> wrote:
>
> hi all,
> i use freescan software for my programming. and it works great.
>
> my question is,
>    im looking to copy all the groups / systems. tgid's and frequencies over to
a memory stick/memory card. so i can print it out. anyone know how to do that. ?
> thanks in advance,
> keith
>

I was wondering if this would work in place of using the disc tap option? I have
seen software to decode digital on your pc. Also, what type of plug is necessary
for the jack on the side for this option.

Thanks, Bob

Would it work in place of the tap? That all depends on what you want to
do. For some applications, it will work. For others, it will not.

The cable that comes with the scanner is what you need for the jack on
the side. It plugs right into the scanner and the PC, and you can use
any modes for which the scanner supplies data (Trunking) and of course
limited to the modes supported by the 346.

Joe M.

None wrote:
> I was wondering if this would work in place of using the disc tap option? I
have seen software to decode digital on your pc. Also, what type of plug is
necessary for the jack on the side for this option.
>
> Thanks, Bob
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ------------------------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
02:33:00
>

I need to know how to program them? Like what is MOT? Sheriff Depts have
Motorola. Email me at rvlane1988@... Thank you

Don't comfuse equipment manufacturer with communications system types.
Motorola is talking about a Motorola trunk communications system, and
not just someone who uses Motorola radios.

What state/county/city are you in? With that info someone should be able
to tell you what system types you need to be concerned with.

Joe M.

Robert wrote:
> I need to know how to program them? Like what is MOT? Sheriff Depts have
Motorola. Email me at rvlane1988@... Thank you

Elkhart COunty Indiana. It works for con/ but just wanted to know what whas EDCS
and MOT/ Thanks robert

--- In BC346XT@yahoogroups.com, MCH <mch@...> wrote:
>
> Don't comfuse equipment manufacturer with communications system types.
> Motorola is talking about a Motorola trunk communications system, and
> not just someone who uses Motorola radios.
>
> What state/county/city are you in? With that info someone should be able
> to tell you what system types you need to be concerned with.
>
> Joe M.
>
> Robert wrote:
> > I need to know how to program them? Like what is MOT? Sheriff Depts have
Motorola. Email me at rvlane1988@... Thank you
>

OK.

EDACS is the GE version of a Motorola system (meaning that it was GE's
trunking format). GE then became Ericsson/GE, then Ericsson, then
Com*Net, then Tyco, then M/A-Com, and now Harris (I think I have the
order correct).

As I mentioned, Motorola is Motorola's trunking format (well, their main
one and the one they sold most of).

LTR is E.F.Johnson's format, although they did license it to other
companies to make equipment for (such as Motorola).

Each has specific programming requirements, but for all of them you have
to program the correct frequencies, and on all but Motorola the correct
LCN with the frequency (you don't really have to know what an LCN is,
but it stands for Logical Channel Number, or the channel number in the
trunk system). Also for all, you have to program in the talkgroups used.

Joe M.

Robert wrote:
> Elkhart COunty Indiana. It works for con/ but just wanted to know what whas
EDCS and MOT/ Thanks robert
>
> --- In BC346XT@yahoogroups.com, MCH <mch@...> wrote:
>> Don't comfuse equipment manufacturer with communications system types.
>> Motorola is talking about a Motorola trunk communications system, and
>> not just someone who uses Motorola radios.
>>
>> What state/county/city are you in? With that info someone should be able
>> to tell you what system types you need to be concerned with.
>>
>> Joe M.
>>
>> Robert wrote:
>>> I need to know how to program them? Like what is MOT? Sheriff Depts have
Motorola. Email me at rvlane1988@... Thank you
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Elkhart County IN.

Looks like your County has some VHF freqys but my guess is there on the Indiana
Analog and Digital Trunk System where your gonna have to buy a Digital
scanner....There on "Site13 in Elkhart Co that has a CC of 860.9625 and a
alternate of 866.975.....

--- In BC346XT@yahoogroups.com, "Robert" <rvlane1988@...> wrote:
>
> Elkhart County IN.
>

I Have A BC346XT  I am trying to find out Correct Order for the LCN for Yazoo
County's E911 Dispatch. I have all the Freqs. i can find and have did a little
experimenting and Did Get The City Police to talk Using Freq:155.1525 with a LCN
of (02)but i can not get the City Fire or the Sheriff Dept to talk while
programed as Trunked I have read every thing i can find on R/R Website but it
deals with the BC396XT. if any body can help I would greatly appreciate the INFO
and help.

The below is what I have in my Pro 97 and it seems to work great (used the
channel locate function on the 97)



Bank 6 Chan 00                0.000000           FM      0.0      D


Bank 6 Chan 01                0.000000           FM      0.0      D


Bank 6 Chan 02              155.152500        LTR      0.0


Bank 6 Chan 03                0.000000           FM      0.0      D


Bank 6 Chan 04              155.617500        LTR      0.0


Bank 6 Chan 05                0.000000           FM      0.0      D


Bank 6 Chan 06              154.362500        LTR      0.0


Bank 6 Chan 07                0.000000           FM      0.0      D






Regards,



Robert

   _____

From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
Dale
Sent: Wednesday, January 26, 2011 12:54 AM
To: BC346XT@yahoogroups.com
Subject: [BC346XT] Correct Order of LCN For Yazoo County MississippiE911





I Have A BC346XT I am trying to find out Correct Order for the LCN for Yazoo
County's E911 Dispatch. I have all the Freqs. i can find and have did a
little experimenting and Did Get The City Police to talk Using Freq:155.1525
with a LCN of (02)but i can not get the City Fire or the Sheriff Dept to
talk while programed as Trunked I have read every thing i can find on R/R
Website but it deals with the BC396XT. if any body can help I would greatly
appreciate the INFO and help.





[Non-text portions of this message have been removed]

If you click on the radioreference "database" and go to Miss on the US map,then 
Yazoo Co you will see your line up on the "LTR" system they show, Yazoo
Co=155.6175-LCN4, Yazoo PD=155.1525-LCN2....Hope this helps....

--- In BC346XT@yahoogroups.com, "Dale" <mr.dale_burrough@...> wrote:
>
> I Have A BC346XT  I am trying to find out Correct Order for the LCN for Yazoo
County's E911 Dispatch. I have all the Freqs. i can find and have did a little
experimenting and Did Get The City Police to talk Using Freq:155.1525 with a LCN
of (02)but i can not get the City Fire or the Sheriff Dept to talk while
programed as Trunked I have read every thing i can find on R/R Website but it
deals with the BC396XT. if any body can help I would greatly appreciate the INFO
and help.
>

Your line up for a PRO97 is fine but a 346XT has a much different programming as
there are "SYSTEMS" not banks.....

--- In BC346XT@yahoogroups.com, "Robert Hayes" <rbhtxk@...> wrote:
>
> The below is what I have in my Pro 97 and it seems to work great (used the
> channel locate function on the 97)
>
>
>
> Bank 6 Chan 00                0.000000           FM      0.0      D
>
>
> Bank 6 Chan 01                0.000000           FM      0.0      D
>
>
> Bank 6 Chan 02              155.152500        LTR      0.0
>
>
> Bank 6 Chan 03                0.000000           FM      0.0      D
>
>
> Bank 6 Chan 04              155.617500        LTR      0.0
>
>
> Bank 6 Chan 05                0.000000           FM      0.0      D
>
>
> Bank 6 Chan 06              154.362500        LTR      0.0
>
>
> Bank 6 Chan 07                0.000000           FM      0.0      D
>
>
>
>
>
>
> Regards,
>
>
>
> Robert
>
>   _____
>
> From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
> Dale
> Sent: Wednesday, January 26, 2011 12:54 AM
> To: BC346XT@yahoogroups.com
> Subject: [BC346XT] Correct Order of LCN For Yazoo County MississippiE911
>
>
>
>
>
> I Have A BC346XT I am trying to find out Correct Order for the LCN for Yazoo
> County's E911 Dispatch. I have all the Freqs. i can find and have did a
> little experimenting and Did Get The City Police to talk Using Freq:155.1525
> with a LCN of (02)but i can not get the City Fire or the Sheriff Dept to
> talk while programed as Trunked I have read every thing i can find on R/R
> Website but it deals with the BC396XT. if any body can help I would greatly
> appreciate the INFO and help.
>
>
>
>
>
> [Non-text portions of this message have been removed]
>

The key you should take from his post is the LCNs:

LCN 02 155.1525
LCN 04 155.6175
LCN 06 154.3625

That is the same programming you should have in your 346.

Joe M.

dataman60435 wrote:
> Your line up for a PRO97 is fine but a 346XT has a much different programming
as there are "SYSTEMS" not banks.....
>
> --- In BC346XT@yahoogroups.com, "Robert Hayes" <rbhtxk@...> wrote:
>> The below is what I have in my Pro 97 and it seems to work great (used the
>> channel locate function on the 97)
>>
>>
>>
>> Bank 6 Chan 00                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 01                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 02              155.152500        LTR      0.0
>>
>>
>> Bank 6 Chan 03                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 04              155.617500        LTR      0.0
>>
>>
>> Bank 6 Chan 05                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 06              154.362500        LTR      0.0
>>
>>
>> Bank 6 Chan 07                0.000000           FM      0.0      D
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> Robert
>>
>>   _____
>>
>> From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
>> Dale
>> Sent: Wednesday, January 26, 2011 12:54 AM
>> To: BC346XT@yahoogroups.com
>> Subject: [BC346XT] Correct Order of LCN For Yazoo County MississippiE911
>>
>>
>>
>>
>>
>> I Have A BC346XT I am trying to find out Correct Order for the LCN for Yazoo
>> County's E911 Dispatch. I have all the Freqs. i can find and have did a
>> little experimenting and Did Get The City Police to talk Using Freq:155.1525
>> with a LCN of (02)but i can not get the City Fire or the Sheriff Dept to
>> talk while programed as Trunked I have read every thing i can find on R/R
>> Website but it deals with the BC396XT. if any body can help I would greatly
>> appreciate the INFO and help.
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

I want to monitor digital UHF 800 on the BCT 346XT since most the police and
fire are on digital now. I noticed there is software to decode digital signals
and there is a product that decodes digital using an IF output of 10.7 mhz. This
product actually decodes so the listener can hear the audio and display it on a
screen.
 
Bob

--- On Mon, 1/24/11, MCH <mch@...> wrote:


From: MCH <mch@...>
Subject: Re: [BC346XT] control channel out
To: BC346XT@yahoogroups.com
Date: Monday, January 24, 2011, 2:02 PM


 



Would it work in place of the tap? That all depends on what you want to
do. For some applications, it will work. For others, it will not.

The cable that comes with the scanner is what you need for the jack on
the side. It plugs right into the scanner and the PC, and you can use
any modes for which the scanner supplies data (Trunking) and of course
limited to the modes supported by the 346.

Joe M.

None wrote:
> I was wondering if this would work in place of using the disc tap option? I
have seen software to decode digital on your pc. Also, what type of plug is
necessary for the jack on the side for this option.
>
> Thanks, Bob
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
> ----------------------------------------------------------
>
>
> Internal Virus Database is out of date.
> Checked by AVG - www.avg.com
> Version: 9.0.783 / Virus Database: 271.1.1/2746 - Release Date: 03/14/10
02:33:00
>







[Non-text portions of this message have been removed]

I Have and now have The S.O And City Fire Dept. talking Thanks






________________________________
From: MCH <mch@...>
To: BC346XT@yahoogroups.com
Sent: Thu, January 27, 2011 10:20:16 PM
Subject: Re: [BC346XT] Re: Correct  Order of LCN  For Yazoo County
MississippiE911


The key you should take from his post is the LCNs:

LCN 02 155.1525
LCN 04 155.6175
LCN 06 154.3625

That is the same programming you should have in your 346.

Joe M.

dataman60435 wrote:
> Your line up for a PRO97 is fine but a 346XT has a much different programming
>as there are "SYSTEMS" not banks.....
>
> --- In BC346XT@yahoogroups.com, "Robert Hayes" <rbhtxk@...> wrote:
>> The below is what I have in my Pro 97 and it seems to work great (used the
>> channel locate function on the 97)
>>
>>
>>
>> Bank 6 Chan 00                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 01                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 02              155.152500        LTR      0.0
>>
>>
>> Bank 6 Chan 03                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 04              155.617500        LTR      0.0
>>
>>
>> Bank 6 Chan 05                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 06              154.362500        LTR      0.0
>>
>>
>> Bank 6 Chan 07                0.000000           FM      0.0      D
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> Robert
>>
>>   _____
>>
>> From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
>> Dale
>> Sent: Wednesday, January 26, 2011 12:54 AM
>> To: BC346XT@yahoogroups.com
>> Subject: [BC346XT] Correct Order of LCN For Yazoo County MississippiE911
>>
>>
>>
>>
>>
>> I Have A BC346XT I am trying to find out Correct Order for the LCN for Yazoo
>> County's E911 Dispatch. I have all the Freqs. i can find and have did a
>> little experimenting and Did Get The City Police to talk Using Freq:155.1525
>> with a LCN of (02)but i can not get the City Fire or the Sheriff Dept to
>> talk while programed as Trunked I have read every thing i can find on R/R
>> Website but it deals with the BC396XT. if any body can help I would greatly
>> appreciate the INFO and help.
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>






[Non-text portions of this message have been removed]

Thanks to Every One who Helped I have the Correct LCN's Now And Hove Y.C.P.D
Y.C.S.O And Y.C.F.D All talking  i will post the TGID's Separately






________________________________
From: MCH <mch@...>
To: BC346XT@yahoogroups.com
Sent: Thu, January 27, 2011 10:20:16 PM
Subject: Re: [BC346XT] Re: Correct  Order of LCN  For Yazoo County
MississippiE911


The key you should take from his post is the LCNs:

LCN 02 155.1525
LCN 04 155.6175
LCN 06 154.3625

That is the same programming you should have in your 346.

Joe M.

dataman60435 wrote:
> Your line up for a PRO97 is fine but a 346XT has a much different programming
>as there are "SYSTEMS" not banks.....
>
> --- In BC346XT@yahoogroups.com, "Robert Hayes" <rbhtxk@...> wrote:
>> The below is what I have in my Pro 97 and it seems to work great (used the
>> channel locate function on the 97)
>>
>>
>>
>> Bank 6 Chan 00                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 01                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 02              155.152500        LTR      0.0
>>
>>
>> Bank 6 Chan 03                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 04              155.617500        LTR      0.0
>>
>>
>> Bank 6 Chan 05                0.000000           FM      0.0      D
>>
>>
>> Bank 6 Chan 06              154.362500        LTR      0.0
>>
>>
>> Bank 6 Chan 07                0.000000           FM      0.0      D
>>
>>
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> Robert
>>
>>   _____
>>
>> From: BC346XT@yahoogroups.com [mailto:BC346XT@yahoogroups.com] On Behalf Of
>> Dale
>> Sent: Wednesday, January 26, 2011 12:54 AM
>> To: BC346XT@yahoogroups.com
>> Subject: [BC346XT] Correct Order of LCN For Yazoo County MississippiE911
>>
>>
>>
>>
>>
>> I Have A BC346XT I am trying to find out Correct Order for the LCN for Yazoo
>> County's E911 Dispatch. I have all the Freqs. i can find and have did a
>> little experimenting and Did Get The City Police to talk Using Freq:155.1525
>> with a LCN of (02)but i can not get the City Fire or the Sheriff Dept to
>> talk while programed as Trunked I have read every thing i can find on R/R
>> Website but it deals with the BC396XT. if any body can help I would greatly
>> appreciate the INFO and help.
>>
>>
>>
>>
>>
>> [Non-text portions of this message have been removed]
>>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>






[Non-text portions of this message have been removed]

FWIW, I posted a YouTube video of this problem:

http://www.youtube.com/watch?v=tLTgft96r0s

My scanner will occassionaly sound the alert tone on the priority channel when
it is not set for the tone out feature.
Any ideas what could be causing this?

Thanks, Bob