Hi Peter and all, the same is for me, and it's good to know that Herbert found the problem... And I've also noticed that faint or very faint sources are much...
Dear Herbert, I use also to stack images. The error of float.... is now very frequent with last astrometrica revision. I can confirm that it appears almost...
Since yesterday (08 Aug 2008 UT), I've been having trouble accessing the MPC Vizier server (CfA, Harvard, USA). Other Vizier servers seem to work okay. Has...
... The Server in Harvard seems to be down. If you try to access the URL http://vizier.cfa.harvard.edu/vizier/ you will not get any response. Cheers, Herbert...
... I have often had a problem with earlier versions (not tried the new one) in crowded fields of not being able to centroid on a very clear but faint image....
Robert McNaught
rmn@...
Aug 10, 2008 1:18 am
3843
Herbert - I'm not sure that the problem you have identified is the cause of what I (& I suspect others) are seeing. I get the divide-by-zero error immediately...
It would seem to me that Astrometrica would need to know which filter was used to make an image to perform the photometry. And I see that the cfg file has a...
... No. The software still need to know if it should take the B, V or R magnitudes from the star catalogue for comparison with your un- filtered images. So if...
... This seems to be another problem. However, this was not reported by any other user, nor did I ever get that error. So it's a bit hard for me to fix that....
... I already started to work on that. There will be a option to manually position a small window to get a centroid, quite silimar to what was done in the DOS...
Thank you, Herbert. _____ From: Astrometrica@yahoogroups.com [mailto:Astrometrica@yahoogroups.com] On Behalf Of Herbert Raab Sent: Sunday, August 10, 2008...
When I re-load previously solved images the RA and Dec show up as I move the cursor around, yet "Object Verification" won't work until I plate solve again. Is...
... the MPC ... work okay. I don't know where the Vizier servers are located physically here, but I will remark that the power was shut down at one of August 9...
... When you load a image that has WCS information, Astrometrica will calculate approximat epositions when you move the corsor over the image. This can be...
I could be losing my mind, but... I generated a MPC report with version 4.5.0.372, and the report contained these three lines: K08J35T C2008 08 11.22254722 40...
Check the time precision setting on the CCD tab of your settings. ... From: Astrometrica@yahoogroups.com [mailto:Astrometrica@yahoogroups.com]On Behalf Of...
It seems clear to me from the information on the URL that you have sent me, Gerald, that the current output format is completely correct the way it is. And...
... But note the "Where such precision is justified" condition for using the extra decimal point. This phrase is in italics on the MPC's site, so evidently...
Thanks, John. Since my role is measurer, not observer, I have a word in to find out the accuracy that can be justified. Nothing has been submitted to MPC yet,...
I thought I would share some info & leaning obtained over the last couple of days concerning these two catalogues. I suspect the issues with Hipparcos will not...
I found it's necessary to set a uplimit for Search Radius when i use the Moving Object Detection to search for asteroid.Sometimes the software will recognize...
... Just to avoid mixing up two things, I want to note that the 'search radius' is the radius in which a fixed star need to be to be detected as a fixed star....
Dear Herbert: I am pulsaryoung of the Astrometrica Mailgroup, let me describe the "SearchRadius" problem in detail.There is a red-color-marked point in the...
Hello "pulsaryoung", note that attachments will be removed in this mailing list (for reasons of security) so we were not able to see your images. If the...
