Finally got time to sit and work on my ATS-3B.1. Opening the package for D2 and one little slip of the knife... It didn't just vanish - it disappeared right...
You may have seem my mention of it some time back, but putting a piece of nylon stocking over the end of the vacuum hose, or even over a wider attachment, has...
... Complete ATS-3A assembled in QRPme Zomboids Altoid tin with 4 bands and power connector with powerpole connectors $170 plus shipping 73 VE3NFK John:...
G'day: I have a dibilitating desease - neuropathy - that has just about removed all sensation/feeling in my feet and hands. Besides the unbalance (due to no...
I just finished soldering my ATS3b and started to check it out. -processer and audio amp are working, but no volt at TP1. As advised, I checked the connections...
Jürg, Are you building an ATS-3B or an ATS-3B.1? Please see KD1JV's message 4083 regarding the 3B.1: 73, Tom K9AC quote Page 19, Q1 and D2 are not listed...
I WOULD CERTAINLY TAKE A STAB AT IT FOR YOU. I've built almost every kit made and some twice. I built an ATS3-B with no problem. You let me know if you need...
Thanks for the reply. This is a VERY good idea. I found all kinds of stuff, but unfortunately not the diode in question. It looks like a call to Mouser is...
Mark, D2 is a dual diode clipper that limits audio on strong received signals. I would continue building and testing the rig. Weak and normal signals should...
Hi gang, Well, the -3B is finished, alive and well. My first QSO was with KV4BU, (FL)on 20 meters, which is 2192 miles from my QTH in CA. Very nice, with my...
Rob: Are you sure you are in tune mode? Click the Menu button then quickly click the Tune Down button, you should see a small 't' in the LED display and the...
Jim, Thanks for the tip. I missed the part about clicking the Menu button and then the tune down button. Sure is easier than hooking up the old straight key to...
... Rob, I find that the TUNE feature is useful for many kinds of tests and for adjusting my BLT's and other tuners. I suggest you limit your time in TUNE mode...
Hello, QBSA kit wanted > $1.000.000,000 for QBSA kit ! ...well it was just the pun but seriously I am highly looking for the QBSA kit (best unbuilt) for my...
Even though it is Dayton weekend, we are still having Run for the Bacon this Sunday night! For all pertinent details, go to: http://www.fpqrp.com/fpqrprun.php ...
This little piggy stayed home from Dayton..hope to hear you on tonight! 73 John W2GB FP # 1606 ... From: Larry Makoski W2LJ To: AT_Sprint@yahoogroups.com Sent:...
Reminder from: AT_Sprint Yahoo! Group http://groups.yahoo.com/group/AT_Sprint/cal Run for the Bacon Sunday May 17, 2009 6:00 pm - 8:00 pm (This event repeats...
AT_Sprint@yahoogroups...
May 18, 2009 12:41 am
4314
OK - they show 9 to 11 PM EDT which would be 7 to 9 PM MDT but 7 PM MDT is 0100 GMT not 0200. What gives here or is my "clock" all screwed up! Regards, Jim...
Hi gang. After a year and half of tinkering with Steve's ATS-3b prototype I am happy to release the first ATS-3bv firmware. It took so long mainly because of...
I think I’m done with my QSBA board (not in a cabinet yet—still having issues with that), but I have a few questions. The voltage varies from around 6v to...
And one follow up question. According to the manual, take-off for the frequency counter should be after the DDS output filter, but folks on this list seem to...
Can one operate the ATS-3B in the PSK31 mode with software such as Digipan? One would think it's a matter of cabling (assuming Didigpan offers the correct...
Hi James. You need a software, which talks language that ATS-3b understands. As of today, it is only PocketDigi, but any software may be extended using...
I wrote to Simon Brown HB9DRV, author of Ham Radio Deluxe and DM780. It seems to me if he gets enough of requests he will be motivated to integrate the ATS-3b...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
