Sean, I don't know how comfortable you are with a file, but here is what I found on mine: The underside of mine, that engages the bed ways, was rough hewn. I ...
518
sbailey@...
May 3, 1999 3:38 am
I had the same problem trying to adjust my tailstock, but it was only off about .007". It would be set perfect, but by the time both screws were tight it...
520
Chadd Thompson
chadd@...
May 3, 1999 3:51 am
I was wondering if anyone has found a good way to get the slop out or the compound slide? My is really bad once the slide starts to get out toward the end of...
521
MMEAGHER
mmeagher@...
May 3, 1999 6:16 pm
... Yes, a common tool for cutting keyways in gears is a broach. The keyway can also be cut with a file (as Varmint Al suggested, IIRC), but it can be time...
522
MMEAGHER
mmeagher@...
May 3, 1999 6:19 pm
In my haste, I forgot to attach the file. Here's the message again, this time with the file. Sorry for the extra message.  Mike  - - - - - - - -  ... ...
523
libers@...
May 3, 1999 9:19 pm
<c028cc273cc7d211bd5d0008c75ce21401d39-@...> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=521 OK I see how you use...
524
mmeagher@...
May 4, 1999 1:49 am
... Broaches do all the cutting in a straight line. The teeth on a broach are increased in size along the axis of the broach so that as it is pushed or pulled...
525
Onis Cogburn
k5vkq@...
May 4, 1999 11:27 pm
It would appear after some surfing the web, that #3 MT collets are probably the best choice for the HF 7x10. At around $15 each for USED ones, they are kind...
526
Cgjaj@...
May 5, 1999 2:53 am
Dear Onis, I have enclosed a hyperlink to a site which will probably give you all the answers that you need. Plus, the Taig prices will knock your socks off. ...
527
cgjaj@...
May 5, 1999 3:12 am
<2.2.32.19990503035116.006f9af-@...> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=520 ... Being a complete novice, I...
528
Onis Cogburn
k5vkq@...
May 5, 1999 3:13 am
Thanks John, I've a 4-jaw chuck on order from Nick but somehow I missed the specifications for the collets. Thanks for the reply. I've what I need to make a...
529
Cgjaj@...
May 5, 1999 3:18 am
Glad to help. john ... eGroup home: http://www.eGroups.com/group/7x10minilathe http://www.eGroups.com - Simplifying group communications...
530
resume@...
May 5, 1999 11:57 am
Carbon brush (2pc) 23593 Timing belt (black) 22877 You have to order these from customer service. Mike K4QET ... eGroup home:...
531
rodriquj@...
May 5, 1999 4:39 pm
<3.0.6.32.19990504182300.0099069-@...> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=525 ... The Taig collet angle...
532
Onis Cogburn
k5vkq@...
May 5, 1999 10:59 pm
Thanks Jose, I'm going to order a set shortly. I'll holler the next time I have a question. Thanks again. Regards, Onis k5vkq@... ... could answer...
545
stpete@...
May 13, 1999 10:11 pm
Well guys, I am an amateur bamboo rod maker and I found this little 7x10 jewel at Grizzly Imports in Memphis in the 'as is' area of the warehouse. I picked it...
546
stpete@...
May 13, 1999 10:20 pm
My first question to the group is: Will I be able to turn low angle tapers with this lathe? In order to make a nice looking ferrule for rods, I'll need to...
547
glscott@...
May 13, 1999 11:15 pm
<pid11091.1999.May.13.3:20.879375.@egroups.com> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=546 ... Welcome to the group! Short...
548
Chadd Thompson
chadd@...
May 14, 1999 1:30 am
At 11:15 PM 5/13/99 -0000, glscott@... wrote: I replaced the original topslide on mine with a more precision ... I was wondering what compound you used...
549
Onis Cogburn
k5vkq@...
May 14, 1999 4:59 am
Hi Rick, I'm planning on it. I've already paid my fees. Regards, Onis k5vkq@... PS Good deal on the lathe. They are not bad little machines. I'm...
550
Onis Cogburn
k5vkq@...
May 14, 1999 5:06 am
Hi again Rick, I turn and taper ferrules on my 7x10. I just set the cross slide for the taper I want and hand crank the cross slide. I also have a Sherline ...
551
Rick Crenshaw
stpete@...
May 14, 1999 8:48 pm
Thanks, Onis. Great idea on the flex shaft for cutting the serrations. I was racking my brain trying to think about how to do this with an arbor and saw. I...
552
rodriquj@...
May 14, 1999 8:56 pm
<pid11091.1999.May.13.3:20.879375.@egroups.com> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=546 ... Hello Rick, Most definitely,...
553
gaff@...
May 14, 1999 10:33 pm
hey guys, just set up a hf 7x10. noticed the feed control wheel is hard to turn, is this normal or should i attempt to adjust it. as i know nothing about a...
554
Onis Cogburn
k5vkq@...
May 15, 1999 1:27 am
Hey Jose, I got the Taig 4-jaw chuck from Nick yesterday. Boy that was quick. I only ordered it last week. I turned the back last night. The three jaw ...
555
toby@...
May 15, 1999 3:46 am
<pid22425.1999.May.14.3:33.414785.@egroups.com> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=553 ... Wil, Sounds like the jib...
556
toby@...
May 15, 1999 4:53 am
<pid11091.1999.May.13.3:20.879375.@egroups.com> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=546 ... How would one accomplish...
557
agplate@...
May 17, 1999 3:04 am
I am interested in adding a rotary index table to the milling attachemnt on my 7 x 10 lathe. Does anyone have experience with and/or suggestions as to which...
558
Becnel Kirk
BecnelK@...
May 17, 1999 8:44 am
Depending on what you want to do, Tony Jeffree has plans on his web page for an indexing attachment for the Taig, I'm sure you could adapt it. ...
559
rodriquj@...
May 17, 1999 4:12 pm
<3.0.6.32.19990514202252.009a010-@...> wrote: Original Article: http://www.egroups.com/list/7x10minilathe/?start=554 ... Sounds great! When I...
